ACC2200 Cheatsheet · Introduction to Management Accounting

Monash University · Cheatsheet for the final exam. Monash Semester 2 final assessment period, 2–18 November 2026 (check your personal exam timetable). Full ACC2200 study guide →

ACC2200
Introduction to Management Accounting
Monash University · Semester 2, 2026
CLOSED-BOOK MEMORY SHEET
Side 1 · recite + check
ACC2200 cheatsheet QR code – open the full ACC2200 study guide
Full guide + ask Sia
about ACC2200
SIDE 1 / 2 · CARRY IT IN YOUR HEAD4 questions · 100 marks · ~60% calculation / ~40% discussionRECITE → APPLY → EXPLAIN

1 · Exam mapcourse data + brief

G10Q10CBC 30FINAL 50

Group Presentation 10% · Quiz 1 10% · Group Assignment — CBC Case Study 30% · Final Examination 50%

“Closed Book with Specifically permitted items as below” ACC2200 Week 12 General Exam Information PDF (undated, current Moodle) + FAQs for eExams S1 2026 — Semester 1 2026 offering; confirm this semester's rule on the LMS (PDF_Week_12_Exam_Information_pdf.txt)

NAMEmethod/baseSHOWworkingCHECKreconcileEXPLAIN + ADVISEwhy result matters
Every multi-part answer: name the method, expose working, reconcile, then interpret.

2 · The definitions that unlock marksCh 1–3 · 9–10

TermRecite
Relevantfuture AND differs between alternatives.
SunkAlready incurred; always irrelevant.
OpportunityContribution forgone from next-best use; relevant though unrecorded.
Product costDM + DL + MOH; inventory until sold.
Period costSelling/admin; expense as incurred.
Cost driverActivity/factor that causes total cost to change.

Planning sets objectives, strategy, targets and budgets. Control implements, compares actual with plan and corrects. Management accounting is internal, tailored, detailed and past/present/future; financial accounting is external, standards-bound, aggregated and historical.

DimensionManagementFinancial
UserInternal managersExternal investors, lenders, regulators
RulesTailored; no external rulesStandards/law; audited
Data/timeFinancial + non-financial; future tooTransaction system; historical
DetailProduct/process/segment; timelyWhole entity; aggregated

Relevance screen: (1) Can a future choice change it? (2) Does it differ across options? A “no” at either gate removes it. Common allocated fixed cost is normally irrelevant; an avoidable fixed cost is relevant. A ledger entry is not required: opportunity cost belongs because the alternative use is forgone.

3 · Cost flow & schedule spineCh 2

RMWIPDM+DL+OHFGCOGSDLMOHasset until soldexpense
Source: Cost Terms, Fig 1 — product costs move through inventory before COGS.
Manufacturing scheduleDM used = opening RM + purchases − closing RM
TMC = DM used + DL + MOH
COGM = opening WIP + TMC − closing WIP
COGS = opening FG + COGM − closing FG
GroupingFormula / trap
PrimeDM + DL
ConversionDL + MOH
Total mfgDM + DL + MOH
Cross-checkPrime + conversion − DL; subtract DL once.

Direct/indirect only makes sense relative to a named cost object; traceability must also be economically feasible. Overtime premium and idle time are MOH. Admin and selling costs never enter COGM.

Classification lensAskExam move
TimingFactory or non-factory?Product cost or period expense.
TraceabilityWhich cost object?Direct if traceable and worth tracing.
BehaviourWhat happens as activity moves?Variable, fixed, mixed or step-fixed.
ControllabilityCan this manager influence it?Name time horizon and responsibility.

4 · Job/normal costingCh 4

Budget OH÷ bdgt baseRATEset once× actualdriverapplied OH ↔ actual OHdirection → COGS entry
Source: Product Costing Systems, Fig 1 — budget the rate, apply with actual use.
POHR = budgeted MOH ÷ budgeted driver
Applied MOH = POHR × actual driver used
Applied − actual > 0 → over-applied → credit COGS
Applied − actual < 0 → under-applied → debit COGS

System choice: unique/custom jobs → job-order, costs on job sheet. Homogeneous continuous output → process, costs averaged by process. Output homogeneity, not industry label, decides.

5 · Cost behaviour & high–lowCh 3

PatternTotalPer unit
Variablechanges with activityconstant
Fixedconstant in rangefalls as volume rises
Mixedfixed base + variable—
Step-fixedflat, then jumps at threshold—
LOW XHIGH Xhigh $ ≠ high XCostX
Source: Cost Behaviour, Fig 2 — select extreme activity, not extreme cost.
Y = a + bX
b = (cost at high X − cost at low X) ÷ (high X − low X)
a = total cost − bX; verify at the other point

Where it bites: predict only inside the relevant range. High–low is fast but hostage to two observations. Regression uses all points; R² is the share of cost variation explained by the driver, not proof of causation and not permission to extrapolate.

Estimation riskWhy it matters
OutlierCan dominate a two-point high–low estimate.
Inflation / changed pricesDollar movement may not come from activity.
Mismatched periodsCost and driver must cover the same window.
Wrong driverFit is not causation; seek operating logic.

6 · Service system chooserCh 8

custom · fewstandard · manyProfessionaljob costinghour / jobService shophybridvisit / txnMass serviceprocesspassenger / kWhno inventory → all costs are period costs
Source: Service Costing, Fig 1 — contact, customisation and volume choose the system.
Professional job cost = labour + applied OH + disbursements
Mass-service unit cost = total period cost ÷ service units

7 · Weighted-average process costingCh 5

Ending WIP: same physical unitsMaterials100% if added at startConversionending % onlynever blend materials and conversion EU
Source: Process Costing, Fig 1 — one physical count, two equivalent-unit counts.
StepWeighted-average move
1 FlowBeg WIP + started = transferred + end WIP.
2 EUTransferred + end WIP × completion %, separately.
3 $/EU(Beg WIP cost + added cost) ÷ EU, by element.
4 AssignTransferred at total $/EU; ending WIP by element.
5 ReconcileTransferred + end WIP cost = total costs in.

Pool beginning-WIP cost with current cost; ignore beginning completion %. FIFO alone separates the work done this period. Materials added at start make ending WIP 100% complete for materials, even if conversion is only partial.

Materials EU = transferred units + ending WIP × materials %
Conversion EU = transferred units + ending WIP × conversion %
Transferred cost = units transferred × (materials $/EU + conversion $/EU)
Ending WIP = materials EU × materials $/EU + conversion EU × conversion $/EU

FIFO contrast: keeps beginning work separate and costs work done this period; weighted average blends it. Use weighted average unless another method is expressly requested.

8 · Support-department allocationCh 6

DIRECTno inter-SDSTEP-DOWNone-wayRECIPROCALfull mutualSupport deptsProductionStage 1 allocate → Stage 2 apply
Source: Overhead Allocation — increasing recognition of support-to-support service.

Step-down order: allocate first the support department serving the most other support departments; break a tie by larger overhead budget. Once allocated, it is closed: no flow back. Re-base the denominator over departments still open.

9 · ABC: hierarchy → rate → distortionCh 7

UNIT · each unitdriver: units/MHmachining · powerBATCH · each batchsetups/batchessetups · inspections · movesPRODUCT · each linedesign hoursdesign · testing · specificationsFACILITY · whole plantexcluderent · security · factory admin
Source: Activity-Based Costing, Fig 1 — driver level must match what triggers cost.
RESOURCESledger $POOLSactivitiesPRODUCTSconsumptionresource driveractivity driver
Source: Activity-Based Costing, Fig 2 — resources → activity pools → products.
Activity rate = pool cost ÷ total driver quantity
Product OH = Σ(activity rate × product driver use)
Consumption ratio = product driver use ÷ total driver use
Traditional volume rateABC correction
Overcosts simple, high-volumeCharges fewer batch/product activities.
Undercosts complex, low-volumeCharges setups, inspections, design consumed.

ABM: use activity data to remove non-value-adding work and attack root-cause drivers. Adopt ABC when diversity, indirect cost and distortion justify measurement cost; it is not automatically superior.

ABC buildControl question
1 Identify activitiesWhat work consumes resources?
2 Form poolsAre costs homogeneous within each activity?
3 Select driverDoes it have a cause-and-effect relation?
4 Compute ratePool ÷ total driver quantity; keep units visible.
5 Charge productsRate × each product's consumption; reconcile each pool.
6 InterpretWhich prices, mix or process decisions were distorted?

Two arithmetic doors: activity-rate method charges rate × driver use; consumption-ratio method charges pool × product share of total driver. They must agree. Facility-level cost has no defensible product cause-and-effect link and is usually excluded from ABC product cost rather than allocated arbitrarily.

10 · CVP memory blockCh 9

BErevenuetotal costfixed costLOSSPROFITunits
Source: CVP Analysis, Fig 1 — the revenue/cost crossing is zero profit.
Unit CM = selling price − unit variable cost
CM ratio = unit CM ÷ selling price
Profit = unit CM × units − fixed cost
BE units = fixed cost ÷ unit CM (round up)
BE $ = fixed cost ÷ CM ratio
Target units = (fixed cost + before-tax target) ÷ unit CM
Before-tax target = after-tax target ÷ (1 − tax rate)
Risk outputFormula
Margin of safetyBudget/actual sales − BE sales; ratio ÷ budget sales.
Operating leverageTotal CM ÷ operating profit; %Δprofit = OLF × %Δsales.
Multi-productWeighted-average unit CM using constant unit sales mix.

Assumptions: linear revenue/cost in range; one driver (volume); costs separable into fixed/variable; constant selling price, efficiency, inventory and sales mix. Tax never moves break-even because profit is zero there.

11 · Tactical decision chooserCh 10

Rank by CM per machine-hour1 Kettlebell $240/MH2 Rower $200/MH3 Bench $160/MH
Source: Tactical Decisions, Fig 1 — per constrained hour, not per unit.
If asked…CompareTrap
Special orderincremental revenue vs incremental costcapacity → forgone CM
Make/buybuy cost vs avoidable make costfreed-capacity value
Keep/droplost CM vs avoidable fixed costcommon fixed cost
Process furtherextra revenue vs separable costjoint cost is sunk
One constraintCM ÷ scarce-resource unitsdo not rank by CM/unit
https://www.asksia.ai/cheatsheet/monash-acc2200 · Full ACC2200 study guide → · side 1/2
Forward this to your tutorial group · Shared by ________
AskSiav2 · 2026-10-25
Monash Semester 2 final assessment period, 2–18 November 2026 (check your personal exam timetable).
Your exam is closed book: nothing printed goes in. Use this sheet to revise and self-test, not to carry.
ACC2200
Worked drills, judgement cards & exam-morning plan
Introduction to Management Accounting · Monash University
SELF-TEST SIDE
Hide the answer path first
ACC2200 cheatsheet QR code – open the full ACC2200 study guide
Full guide + ask Sia
about ACC2200
SIDE 2 / 2 · FIVE DRILLSBlank page first · formula → working → answer → reasonCOVER ANSWERS · RECALL ALOUD

12 · Drill 1 — Kanga cost flowCh 2 worked example

Given: opening/purchases/closing DM 48,000 / 415,000 / 39,000; DL 268,000; indirect labour 52,000; factory rent 60,000; factory depreciation 44,000; utilities 29,000; indirect materials 15,000; admin salaries 88,000; sales commissions 71,000; opening/closing WIP 31,000 / 25,000; opening/closing FG 54,000 / 63,000; sales 1,120,000.

DM used 48 + 415 − 39 = 424MOH 52 + 60 + 44 + 29 + 15 = 200TMC 424 + 268 + 200 = 892COGM = 898COGS = 889
Source numbers: Cost Terms worked example — build downward and keep period costs out.
  1. DM used = 48,000 + 415,000 − 39,000 = 424,000.
  2. MOH = 52,000 + 60,000 + 44,000 + 29,000 + 15,000 = 200,000.
  3. TMC = 424,000 + 268,000 + 200,000 = 892,000.
  4. COGM = 892,000 + 31,000 − 25,000 = 898,000.
  5. COGS = 54,000 + 898,000 − 63,000 = 889,000.
  6. Gross profit = 1,120,000 − 889,000 = 231,000. Period costs = 159,000. Operating profit = 72,000.
CheckAnswer
Prime424 + 268 = 692
Conversion268 + 200 = 468
Cross-check692 + 468 − 268 = 892
Trap WIP adjusts TMC to COGM; FG adjusts COGM to COGS. Admin and selling remain period costs.

Rapid classification replay

CostProduct/periodDirect/indirectBehaviour
Green beans in a coffee bagProductDirectVariable
Straight-line roaster depreciationProduct: MOHIndirectFixed
Factory supervisorProduct: MOHIndirectFixed
Sales commissionPeriodDirect to sale, not productVariable

Run three separate lenses: timing, traceability and behaviour. Never infer one from another. A cost may be a product cost yet indirect and fixed; its labels do not change the total dollars, only how those dollars are used. For a pure service entity there is no inventory to value, so every cost is a period cost and no manufacturing COGM schedule is built.

Schedule presentation: show DM used, MOH, total manufacturing cost, COGM and COGS as labelled subtotals. Bracket period costs outside the factory schedule. If the final number slips, ordered working preserves method marks and makes the reconciliation fault visible.

13 · Drill 2 — Northline high–lowCh 3 worked example

Given: high activity 18,000 km at $9,400; low activity 6,000 km at $5,800. Find b, a, the equation and predicted cost at 14,000 km.

6,00018,00014,000 → $8,200$km
Source: Cost Behaviour, Fig 2 — the 14,000 km prediction stays inside 6,000–18,000.
b = (9,400 − 5,800) ÷ (18,000 − 6,000)
= 3,600 ÷ 12,000 = $0.30/km
a = 9,400 − (0.30 × 18,000) = $4,000/month
Y = 4,000 + 0.30X
At 14,000: 4,000 + 4,200 = $8,200

Check: low point gives 5,800 − (0.30 × 6,000) = 4,000. The agreement validates the algebra, not the causal quality of the driver.

If you see…Do this
Highest dollar cost at mid activityIgnore it for selecting high/low.
Prediction outside observed activityFlag extrapolation beyond relevant range.
Regression R² = 0.9292% of cost variation explained; not causation.
Step jumpDo not force one linear a + bX across threshold.

14 · Job-costing direction checkCh 4

Budget OH 480,000 ÷ 16,000 DLH = $30/DLH
Applied = $30 × 4,000 actual DLH = $120,000
Actual OH = $128,000 → under-applied $8,000
Dr COGS 8,000 · Cr MOH 8,000

Say it aloud: “applied less than actual → too little charged to production → add the shortfall to COGS.”

Direction cardAccount meaningClose to COGS
Applied < actualMOH has debit balance; production was underchargedDebit COGS · credit MOH
Applied > actualMOH has credit balance; production was overchargedDebit MOH · credit COGS

Method-choice flash test

15 · Drill 3 — Meadowvale processCh 5 worked example

Given: beginning WIP 12,000 units; started 68,000; transferred 72,000; ending WIP 8,000 at 25% conversion. Materials added at start. Materials cost: 24,000 + 96,000; conversion: 15,000 + 170,000.

80,000 physical units accounted forMaterials: 72,000 + 8,000 = 80,000 EUConversion: 72,000 + 2,000 = 74,000 EUTransferred$288,000Ending WIP$17,000
Source numbers: Process Costing worked example — materials and conversion diverge.
  1. Flow: 12,000 + 68,000 = 72,000 + 8,000 = 80,000.
  2. Materials EU = 72,000 + 8,000 × 100% = 80,000.
  3. Conversion EU = 72,000 + 8,000 × 25% = 74,000.
  4. Materials $/EU = 120,000 ÷ 80,000 = $1.50. Conversion $/EU = 185,000 ÷ 74,000 = $2.50.
  5. Transferred = 72,000 × $4.00 = $288,000.
  6. Ending WIP = 8,000×1.50 + 2,000×2.50 = $17,000.
  7. Reconcile: 288,000 + 17,000 = $305,000 = total cost in.
Classic wrong moveCorrection
Apply 25% to materialsMaterials enter at start → 100%.
Use beginning WIP 70% conversionWeighted average ignores beginning completion stage.
One blended EUCompute separate columns by cost element.
Stop after assignmentReconcile total cost in = total cost out.

Blank production-report template

Physical units: beg WIP + started = transferred + end WIP
EU table: two columns — materials | conversion
Cost/EU: (beg cost + added cost) ÷ relevant EU
Assign: transferred at full cost; ending WIP by element
Reconcile: both assignments = all cost to account for

Explain the method: weighted average deliberately blends prior and current work, so it is simpler but does not isolate current-period performance. FIFO does isolate this period, which is why beginning completion matters there. In this course, use weighted average unless another method is expressly named.

Diagnosis from a mismatchFirst place to inspect
Physical units do not balanceStarted, transferred or ending counts.
Cost/EU unexpectedly highEU denominator and beginning cost pooling.

16 · Allocation + ABC recall cardsCh 6–7

PromptImmediate response
Direct methodIgnore all support-to-support service; re-base on production only.
Step-downOrder, allocate, close; never flow back.
ReciprocalSimultaneous equations recognise mutual service fully.
Plantwide distortionOne base blends departments with different consumption.
ABC ratePool cost ÷ total activity driver.
ABMAttack why activities occur; eliminate waste.
$180,000 ÷ 150 setups = $1,200/setupALPHA · 30$36k ÷ 20k u= $1.80/unitBETA · 120$144k ÷ 4k u= $36/unitBeta: 80% setups; 17% unitsVolume basis undercosts Beta
Source numbers: ABC worked example — batch intensity, not output volume, causes setup cost.

Step-down numerical spine

Northwind: allocate Maintenance first because the “serves other support departments” rule ties and Maintenance has the larger budget. $120,000 on 1,000:6,000:3,000 → Stores 12,000; Machining 72,000; Assembly 36,000. Stores becomes 72,000; Maintenance is closed, so re-base 500:300 → Machining 45,000; Assembly 27,000.

Machining OH = 400,000 + 72,000 + 45,000 = 517,000
Rate = 517,000 ÷ 10,000 MH = $51.70/MH
Assembly OH = 260,000 + 36,000 + 27,000 = 323,000
Rate = 323,000 ÷ 8,000 LH = $40.38/LH

Reconcile: original support cost 180,000 = received by production 117,000 + 63,000. If it does not tie, inspect the denominator and any forbidden flow-back.

Judgement Reciprocal is most accurate, but its extra effort is worth it only when mutual support is material.
Allocation self-checkQuestion to ask
Order stated?Most other support departments served; larger budget breaks tie.
Closed department protected?No later cost may flow back to it.
Denominator re-based?Use only destinations still eligible.
Production totals complete?Own OH + all received support cost.
Stage 2 rate labelled?Department cost ÷ its own budgeted driver.

17 · Drill 4 — Lumen CVPCh 9 worked example

Given: price $180; variable cost $108/unit; fixed cost $540,000; target profit $180,000.

CM = 180 − 108 = $72 · ratio = 40%BREAK-EVEN540,000 ÷ 727,500 unitsTARGET PROFIT720,000 ÷ 7210,000 unitsBE sales = $540k/.40 = $1.35m
Source numbers: CVP worked example — build CM first; every answer flows from it.
  1. Unit CM = 180 − 108 = $72.
  2. CM ratio = 72 ÷ 180 = 40%; price is the denominator.
  3. BE units = 540,000 ÷ 72 = 7,500.
  4. BE dollars = 540,000 ÷ 0.40 = $1,350,000; check 7,500×180.
  5. Target units = (540,000 + 180,000) ÷ 72 = 10,000.
If you see…Do Y
Fractional BE unitsRound up.
After-tax targetGross up ÷ (1 − tax rate), then add FC.
Tax-rate change at BENo effect: profit and tax are zero.
Several productsWeighted-average unit CM; assume constant mix.
High fixed-cost structureHigher leverage; profit swings harder.

18 · CVP assumption sentencesCh 9

“The estimate assumes price and unit variable cost remain linear within the relevant range.” “Volume is treated as the only driver, although batch and product activities may also move cost.” “The multi-product result is valid only while the assumed sales mix holds.”

Discussion mark Name the assumption and connect it to the firm’s facts; do not list assumptions without consequence.

Risk-output recall

Margin of safety = budgeted/actual sales − break-even sales
MoS ratio = margin of safety ÷ budgeted/actual sales
Operating leverage factor = total CM ÷ operating profit
% change in profit = OLF × % change in sales

19 · Drill 5 — Nord product mixCh 10 worked example

RowerBenchKettle
Demand3,0006,00040,000
Price90050090
Variable50018054
MH/unit2.02.00.15
CM/unit40032036
CM/MH200160240
20,000 machine-hours → allocate by rankKettlebell6,000 MHRower6,000 MHBench8,000 MH40,000 Kettle + 3,000 Rower + 4,000 BenchTC $3.92m · 2k Bench unmet
Source numbers: Tactical Decisions, Fig 1 — lowest CM/unit wins after conversion to CM/MH.
  1. CM/unit: Rower 400; Bench 320; Kettlebell 36.
  2. CM/MH: 200; 160; 240 → rank Kettlebell, Rower, Bench.
  3. Kettlebell demand uses 40,000×0.15 = 6,000 MH; 14,000 left.
  4. Rower demand uses 3,000×2 = 6,000 MH; 8,000 left.
  5. Bench gets 8,000÷2 = 4,000 units.
  6. Contribution = 40,000×36 + 3,000×400 + 4,000×320 = $3,920,000.

20 · Judgement cards + trapsCh 1 · 4–10

If you see X→ do Y
Past cost / same both waysStrike it out: sunk/common.
Special order + full capacityAdd displaced regular-sales CM.
Sell/process furtherIgnore joint cost; compare extra revenue/cost.
Applied < actual OHUnder-applied; debit COGS.
Materials at process startEnding WIP materials = 100%.
Low-volume complex productTraditional volume rate likely undercosts it.
Service charge-out rateBilling figure, not job cost.

21 · Exam-morning planguide strategy

WRITEformulaeSAYtrapsDOone pathSTOPinputRecall: COGM · high–low · POHR · EUABC · CVP · relevant cost · CM/hourSleep + clean working > rereading
Final check: reconstruct, explain and stop — this page does not enter the exam.
https://www.asksia.ai/cheatsheet/monash-acc2200 · Full ACC2200 study guide → · side 2/2
Forward this to your tutorial group · Shared by ________
AskSiav2 · 2026-10-25
Monash Semester 2 final assessment period, 2–18 November 2026 (check your personal exam timetable).
Your exam is closed book: nothing printed goes in. Use this sheet to revise and self-test, not to carry.

Want one for YOUR exact syllabus?

Sia is your free desktop study agent. Drop your Monash University ACC2200 slides — Sia builds a sheet tailored to YOUR exam. Better than this library because it knows YOUR materials.

↓ Download Sia · Free