10984 Chap.6 Passive Spinal Movements: PPIVMs and PAIVMs
Passive Spinal Movements: PPIVMs and PAIVMs
Definitions at the segment
Maitland's definitions separate physiological movements, which the patient can perform actively, from accessory movements, which can only be performed on them.
PPIVMs examine segmental rotations in three planes, and PAIVMs examine translations.
Rules and mechanics
Two rules from the passive movements lecture explain lumbar behaviour: rotation is available about an axis perpendicular to the zygapophysial joint surfaces and blocked about an axis parallel to them.
The chapter applies them to rotation tests, posteroanterior mobilisation and the evidence on manipulation and lasting displacement.
Why mechanics matter for reasoning
Knowing what a passive technique does to a segment prevents over-interpreting the response.
A painful posteroanterior pressure suggests a segment sensitive to extension, not a displaced vertebra, and that difference shapes both the hypothesis and the explanation you give the patient.
What to be able to do afterwards
You should be able to define physiological and accessory movement, distinguish PPIVMs from PAIVMs, state the two segmental rotation rules and apply them to lumbar rotation, explain the mechanics of a lumbar posteroanterior mobilisation, and describe what the evidence says about manipulation and lasting displacement.
A common mistake
Students sometimes describe a painful posteroanterior pressure as a stiff or displaced vertebra.
The pressure mainly produces extension at the target segment, so record the response as pain and resistance to that movement, link it to an extension marker and reassess rather than inferring position.
What this chapter covers
- 01
Physiological and accessory movement
- 02
PPIVMs and PAIVMs
- 03
Six degrees of freedom
- 04
Free and blocked axes
- 05
Posteroanterior mobilisation mechanics
- 06
Manipulation and cavitation
Worked example · free
Predict the response to forced lumbar axial rotation
- 1Recall that axial rotation is the blocked axis at lumbar segments.
- 2Explain that forcing rotation about a blocked axis gaps one z-joint and compresses the other.
- 2Link one-sided pain to the compressed or the gapped side as competing hypotheses.
- 1Plan a further test to tell them apart before naming a source.
Key terms
- Accessory Movement
- Accessory Movement is joint motion a person cannot perform actively but that another person can produce passively.
- Blocked Axis
- Blocked Axis is an axis parallel to the joint surfaces about which segmental rotation is restricted.
Passive Spinal Movements: PPIVMs and PAIVMs FAQ
What is the difference between a PPIVM and a PAIVM?
A PPIVM passively tests a segment's rotation within flexion, extension, side bending or rotation. A PAIVM passively translates the segment, for example posteroanteriorly, in a way the patient cannot produce alone, and tests its response to pressure.
What does a lumbar posteroanterior mobilisation do to the segment?
The force runs parallel to the joint surfaces, the anatomy resists forward translation, and the rotation produced at the target segment is extension. A painful response therefore suggests an extension-sensitive segment rather than a displaced vertebra.
Does manipulation put a vertebra back into place?
The evidence summarised in the lecture shows force can displace vertebrae during a technique, but there is no lasting displacement without tissue failure. Explanations should describe movement and changes in sensitivity instead of repositioning.
Why do lumbar segments allow so much flexion and extension?
Lumbar joint orientations permit a large amount of sagittal rotation because rotation is available about an axis perpendicular to the joint surfaces. Axial rotation, about an axis parallel to them, is blocked, so lumbar segments move far more in flexion and extension than in twisting.
How can a PAIVM be adapted, and why?
Change from central to unilateral pressure to bias one side of the segment, or alter the starting position, for example with some extension or side flexion, to change joint loading before the pressure. State the hypothesis each adaptation tests so the result changes your weighting.
Assessment move
Draw a lumbar segment from above and mark the free and blocked axes, then explain each rule aloud to a peer. Practise central and unilateral posteroanterior pressures at two levels and record pain and resistance in a consistent format. Write two adaptations of a PAIVM with the hypothesis each one tests.
Finally, script a short explanation for a patient who asks whether their spine has been put back in place, consistent with the evidence on lasting displacement. Before the manipulation session, write the hypothesis, expected marker change and stopping rule for one lumbar technique you plan to practise. After practice, compare your pressure grades and responses with a partner's at the same levels to gauge your reliability.
Working through Passive Spinal Movements: PPIVMs and PAIVMs in 10984? Sia is AskSia’s AI Health and Medicine tutor — ask any 10984 Passive Spinal Movements: PPIVMs and PAIVMs question and get a clear, step-by-step explanation grounded in how 10984 is taught and assessed. Read this chapter free, then take your hardest questions to Sia.