University of Birmingham · FACULTY OF ANATOMY & PHYSIOLOGY

12629 Chap.6 Torque, Levers and Static Equilibrium

- one subject, every graph, every model, every mark
6 Chapters4-page Bible
Our own words - no uploaded lecturer files
Updated for this semester
Chapter 6 of 8 · 12629

Torque, Levers and Static Equilibrium

Draw geometry before calculating

Torque is force multiplied by perpendicular moment arm. Mark the axis and line of action before measuring distance, then choose a rotational sign convention.

A force passing through the axis has zero moment arm and contributes no torque about that axis even though it can still matter for force balance.

Use both equilibrium conditions

Static equilibrium requires external torque and external force sums to equal zero. Torque balance can determine an unknown muscle force, while force balance then determines a joint reaction.

Lever class follows the arrangement of axis, effort and resistance, and mechanical advantage equals force-arm length divided by resistance-arm length.

Read torque from the force line

The point where a force is applied does not supply the moment arm automatically. Extend the force into a line of action and drop the shortest perpendicular from the axis. That distance belongs in the torque equation.

If the line crosses the axis, its moment arm is zero. The force may still affect translational balance, but it produces no torque about that selected axis.

Rotational direction must be assigned from geometry. Choose anticlockwise or clockwise as positive and keep the convention for the whole equation. Two downward forces on opposite sides of an axis create opposite torques.

Convert centimetres to metres before multiplying, and carry newton-metres as the torque unit. Substituting each result back into the signed sum should return zero in an equilibrium problem.

Separate torque and force balance

Begin static analysis with the torque equation because a force through the axis can be excluded from that equation.

Once the unknown muscle or external force has been solved, write the force sum separately to obtain any joint reaction. A negative result means the actual force direction is opposite to the assumed positive direction. It is not a negative physical amount.

Lever classification supplies a second check on geometry.

Axis between effort and resistance is first class, resistance in the middle is second class, and effort in the middle is third class. Mechanical advantage divides force-arm length by resistance-arm length. A value below one describes a shorter force arm, not a useless system; movement range or speed can accompany a force disadvantage. State what the ratio measures before judging its consequence.

In this chapter

What this chapter covers

  • 01

    Torque

  • 02

    Moment Arm

  • 03

    Lever Classes

  • 04

    Mechanical Advantage

  • 05

    Torque Balance

  • 06

    Force Balance

Worked example · free

Balance a forearm system

Q [8 marks]. AskSia-authored practice. A 30 N load acts 0.24 m from an elbow and a muscle acts with a 0.06 m opposing moment arm. Find muscle force. The marks shown here are not a University mark allocation.
Signed lever balance.Signed lever balance. The left torque is 40 × 0.15 = 6 N·m and the right torque is 24 × 0.25 = 6 N·m.axis40 N24 N0.15 m0.25 m
Signed lever balance. The left torque is 40 × 0.15 = 6 N·m and the right torque is 24 × 0.25 = 6 N·m.
  • 2Choose rotational signs.
  • 4Solve torque balance.
  • 2Check the proportion and units.
Torque balance gives Fm(0.06) - 30(0.24) = 0. The load torque is 7.2 N·m, so Fm = 7.2 / 0.06 = 120 N in the opposing rotational direction. The muscle force is larger because its moment arm is shorter.
Sia tip — Predict which force must be larger from the moment arms before solving.
Glossary

Key terms

Torque
Torque is the rotatory effect of force about an axis.
Moment Arm
Moment Arm is the perpendicular distance from an axis to a force line of action.
Mechanical Advantage
Mechanical Advantage is force-arm length divided by resistance-arm length.
FAQ

Torque, Levers and Static Equilibrium FAQ

What distance belongs in the torque equation?

Use the perpendicular distance from the axis to the force’s line of action. The distance to the application point or the total bone length is not automatically the moment arm.

Why is force balance needed after torque balance?

A reaction force can pass through the axis and contribute zero torque while still being required for translational balance. Static equilibrium therefore requires both signed torque and force sums to equal zero.

How are lever classes identified?

Find which component lies between the other two. Axis in the middle is first class, resistance in the middle is second class, and effort in the middle is third class.

How can a torque result be checked without repeating every step?

Compare force magnitudes with their perpendicular moment arms and predict which product should be larger. Then substitute the solved value into the signed torque sum. A balanced static system must return zero, and the units must remain newton-metres throughout.

What does mechanical advantage below one mean?

It means the force arm is shorter than the resistance arm because the ratio divides force-arm length by resistance-arm length. It describes a force disadvantage in the geometry, not a useless lever, and it may accompany movement range or speed benefits.

Study strategy

Exam move

For every problem, draw the axis, force lines and perpendicular arms before writing equations. Predict torque directions and relative force sizes. Substitute the final values back into both torque and force balances.

Working through Torque, Levers and Static Equilibrium in 12629? Sia is AskSia’s AI Anatomy & Physiology tutor — ask any 12629 Torque, Levers and Static Equilibrium question and get a clear, step-by-step explanation grounded in how 12629 is taught and assessed. Read this chapter free, then take your hardest questions to Sia.

A+Everything unlocked
Unlocks this Bible + all 17 of your subjects at University of Birmingham, plus 1,000+ more Bibles across the AskSia library.
Sia - your 12629 tutor, unlimited, worked the way the exam marks it
The full 4-page Bible + practice bank with worked solutions
Chrome extension - sync your LMS so Sia knows your deadlines
Bilingual EN / Chinese on every Bible and every Sia answer
$0.99 Trial
30-day money-back · cancel in one tap · how it works