40366 Chap.11 Design Process and Materials Selection
Design Process and Materials Selection
Four stages of a design
The design strand of the module takes simple components and assemblies from concept through preliminary design and detail design to test. Items are modest at first-year level but are chosen so that the best answer must weigh drivers beyond the purely technical, such as the needs of users, customers, the business and society.
Designs are presented through sketches, computer aided design in SolidWorks, written justifications and specifications, and small teams carry out design-build-test or component strip-down work.
Margins and loads
For aerospace students the learning outcomes add the use of design loads, safety factors and reserve factors when sizing simple aerostructure parts.
A design stress is the calculated stress multiplied by a design factor greater than one, and a reserve factor compares the allowable stress with that design stress; at 1 or above, the part keeps its margin.
Selecting materials systematically
The GRANTA EduPack database supports a systematic selection method.
Chart stages plot one property against another and filter records with a box or an index line; for light, strong parts the index is yield strength over density, drawn with slope 1 on logarithmic axes.
Limit stages apply minimum or maximum property values, tree stages filter by category or process, and the Engineering Solver, available in the advanced Level 3 databases, turns a loading case into the property limits a material must meet.
What this chapter covers
- 01
Concept, preliminary design, detail design and test
- 02
Drivers beyond the purely technical
- 03
Design stress and the design factor
- 04
Reserve factors for aerostructure parts
- 05
Property charts and index lines
- 06
Box, limit and tree selection stages
- 07
Engineering Solver for property limits
- 08
Sketches, CAD and written specifications
Worked example · free
Shortlist drone arm materials by specific strength
- 2Specific strength is yield strength over density: P 270 MPa ÷ 2,700 kg/m³ = 100 kN·m/kg, Q about 70.5, R 125 and S 50.
- 1Apply the box: Q fails the density limit and S fails the strength limit; P and R pass both.
- 1Apply the index line at 90 kN·m/kg: P and R lie above it, so both survive, and R ranks ahead of P.
Key terms
- Design Factor
- Multiplier greater than one applied to a calculated stress so that a part tolerates loads and flaws nobody predicted.
- Reserve Factor
- Ratio of allowable stress to design stress; a value of at least 1 shows that the required margin is still present.
- Specific Strength
- Yield strength per unit density, the measure that ranks materials for parts that must be both strong and light.
- Index Line
- Straight line on a logarithmic property chart along which a chosen property combination is constant, used to split better candidates from worse.
- Limit Stage
- Selection step in a materials database that rejects every record falling outside typed minimum or maximum property values.
Design Process and Materials Selection FAQ
What are the stages of the design process taught in this module?
Designs move from concept, where options are sketched, through preliminary design, where loads and rough sizes are checked, to detail design with CAD drawings and a specification, and finally to test, where measured behaviour is compared with the prediction.
How do I calculate a reserve factor for a bracket?
First find the calculated stress from load and area, then multiply it by the design factor to get the design stress. Divide the allowable stress by that design stress. A result of 1 or more means the bracket keeps its margin; below 1 it needs redesign.
Why is an index line drawn with slope 1 on a strength against density chart?
Yield strength divided by density equal to a constant becomes a straight line of slope 1 once both axes are logarithmic. Every material on that line shares one specific strength, and those above it beat it, so moving the line upwards shortens the list.
What is the difference between a limit stage and a tree stage in GRANTA EduPack?
A limit stage filters on numbers, rejecting records whose properties fall outside the minimum or maximum you type. A tree stage filters on categories, for example keeping only materials that are linked to a chosen shaping process in the database hierarchy.
Can I install SolidWorks on my own laptop for the CAD work?
Canvas provides student licence installation instructions for personal computers and notes that macOS is unsupported, while the introductory lecture says the package can only be used on University computers. Confirm the current arrangement with the module team and plan time in timetabled sessions.
Assessment move
Take one small component you can hold, such as a shelf bracket or a bike bottle cage, and walk it through the four design stages on paper. Write its load case and the drivers that are not technical, sketch two concepts, and estimate the stress in the weakest section. Apply a design factor, compute the reserve factor and decide whether the part passes.
Then open the materials database, plot yield strength against density, add an index line and a box, and see which materials survive. Finish by writing three sentences of justification for your choice that mention cost or manufacture as well as strength, because a shortlist alone does not explain a decision.
Working through Design Process and Materials Selection in 40366? Sia is AskSia’s AI Engineering tutor — ask any 40366 Design Process and Materials Selection question and get a clear, step-by-step explanation grounded in how 40366 is taught and assessed. Read this chapter free, then take your hardest questions to Sia.