The University of Manchester · FACULTY OF ENGINEERING

AERO61021 Chap.3 Data Types and Measurement References

- one subject, every graph, every model, every mark
7 Chapters3-page Bible
Our own words - no uploaded lecturer files
Updated for this semester
Chapter 3 of 10 · AERO61021

Data Types and Measurement References

Data Types and Measurement References covers three distinctions that decide how a measurement should be recorded and interpreted. Qualitative information describes and compares without units, while quantitative information is numerical, usually carries units, and is either discrete or continuous; images can bridge the two when an angle or length can be measured from them.

Reference conditions separate absolute measurements, zeroed on a fixed standard such as a perfect vacuum, gauge measurements, zeroed on the changing ambient condition, and differential measurements, taken between two points the experimenter chooses.

Getting the reference wrong silently shifts every reading, so the chapter converts gauge and differential values onto an absolute scale and shows how an unrecorded ambient pressure becomes an error.

The third distinction is between point and field measurements: pressure taps, strain gauges and thermocouples give values only where they sit, whereas pressure-sensitive paint, image correlation, infrared imaging and particle image velocimetry map whole surfaces or planes.

The chapter compares their strengths and costs and explains why prior knowledge of the physics matters when sensors can only be placed at a few locations, and how a richer field picture can prevent misreading the physics.

In this chapter

What this chapter covers

  • 01

    Qualitative and quantitative information

  • 02

    Discrete and continuous quantitative data

  • 03

    Extracting numbers from images such as Schlieren photographs

  • 04

    Absolute, gauge and differential reference conditions

  • 05

    Converting gauge readings with the measured ambient pressure

  • 06

    Point measurements and spatial coverage

  • 07

    Field techniques: pressure-sensitive paint, image correlation and particle image velocimetry

Worked example · free

Convert gauge readings to absolute pressure

Q [4 marks]. On a test day the barometer reads 100.9 kPa. A gauge sensor on a supply pipe shows +12.4 kPa and one on a vacuum chamber shows -45.0 kPa. The pipe downstream of a valve reads 109.6 kPa absolute. Find the absolute pressures and the drop across the valve. Marks used here follow an AskSia weighting, not the University's own marking.
All four readings sit on one absolute pressure axis that starts at a perfect vacuum; the purple arrows are the gauge readings measured from the day's ambient prAll four readings sit on one absolute pressure axis that starts at a perfect vacuum; the purple arrows are the gauge readings measured from the day's ambient pressure and the orange bar is the filter drop.perfect vacuumambient 99.8 kPavessel 39.8 kPaline 135.0 kPa+35.2 kPa gauge-60.0 kPa gauge6.4 kPa differentialabsolute pressure, kPa
All four readings sit on one absolute pressure axis that starts at a perfect vacuum; the purple arrows are the gauge readings measured from the day's ambient pressure and the orange bar is the filter drop.
  • 1Absolute equals ambient plus gauge, so the supply pipe is at 100.9 + 12.4 = 113.3 kPa absolute.
  • 1The chamber is at 100.9 + (-45.0) = 55.9 kPa absolute, which is positive and therefore physically possible.
  • 1The drop across the valve is 113.3 - 109.6 = 3.7 kPa.
  • 1A differential sensor across the valve would read 3.7 kPa directly and would be unaffected by changes in the day's ambient pressure.
The supply is at 113.3 kPa absolute, the chamber at 55.9 kPa absolute and the valve drop is 3.7 kPa. Marks here are AskSia's own practice weighting and are not published by the University.
Sia tip — Write the day's barometer reading beside every gauge channel; without it a gauge value can never be placed on the absolute scale.
Glossary

Key terms

Absolute pressure
Pressure measured from a perfect vacuum as zero.
Gauge pressure
Pressure measured relative to the ambient atmospheric pressure at the time of the test.
Differential pressure
The pressure difference between two points chosen by the experimenter.
Field measurement
A technique that measures a quantity across a whole surface or plane rather than at discrete points.
Quantitative data
Information expressed as numbers, usually with units, that can be discrete or continuous.
FAQ

Data Types and Measurement References FAQ

Why does gauge pressure change from day to day?

A gauge sensor measures relative to the surrounding atmosphere, and atmospheric pressure varies with the weather. The same absolute pressure can therefore give different gauge readings on different days. Record the ambient pressure during each test so readings can be converted to absolute values and compared fairly.

When is a field technique worth its cost?

When the flow or deformation has features that a few sensors could miss, field methods such as pressure-sensitive paint or particle image velocimetry reveal the whole pattern. They are expensive, generate large data sets and can involve lasers, so they suit tests where understanding the structure matters more than a handful of numbers.

Can qualitative observations be useful in a report?

Yes. Descriptions such as where a flow separates or how a crack runs can be quicker to obtain and can explain what the numbers show. Where possible, convert them: an angle measured from a photograph or a count of events turns a description into quantitative evidence that can be analysed.

Study strategy

Assessment move

Organise this chapter around three quick decisions you should make for every quantity you log: what kind of data it is, what its zero is, and where it is measured. Practise the first with mixed lists of everyday and laboratory statements, labelling each as qualitative, quantitative discrete or quantitative continuous, and add one sentence describing how you could turn each qualitative item into a number.

For the reference question, draw a single absolute pressure line from a perfect vacuum upwards and place invented gauge and differential readings on it; repeat with a different ambient pressure to see how gauge values shift while absolute values stay put.

Keep a short checklist for your laboratory notebook that requires the reference type and the ambient pressure or temperature next to every channel, because missing references are one of the easiest errors to make and one of the hardest to recover.

For the point and field comparison, build your own table of measured quantities with one point method and one field method each, adding cost, data volume, response speed and safety notes; the strain, pressure, temperature, velocity and vibration rows give a solid core.

Then take a simple test case, such as the pressure distribution on an aerofoil, and argue how many taps you would need and where you would place them, using what you expect the flow to do. That argument is exactly the kind of justification a group project report needs when explaining sensor layout.

If your project uses a camera or images, plan which numbers you will extract from them before the test, rather than treating images as illustrations afterwards. Finally, revisit the full-scale idea from the previous chapter: a differential sensor rated at plus or minus a value has a full scale of twice that value, and every percentage error is quoted against it.

A+Everything unlocked
Unlocks this Bible + all 41 of your subjects at The University of Manchester, plus 1,000+ more Bibles across the AskSia library.
Sia - your AERO61021 tutor, unlimited, worked the way the exam marks it
The full 3-page Bible + practice bank with worked solutions
Chrome extension - sync your LMS so Sia knows your deadlines
Bilingual EN / Chinese on every Bible and every Sia answer
$0.99 Trial
30-day money-back · cancel in one tap · how it works