The University of Manchester · FACULTY OF ENGINEERING

AERO61021 Chap.9 LabVIEW Programming Structures

- one subject, every graph, every model, every mark
7 Chapters4-page Bible
Our own words - no uploaded lecturer files
Updated for this semester
Chapter 9 of 10 · AERO61021

LabVIEW Programming Structures

LabVIEW Programming Structures covers the graphical language used for data acquisition, control and the group project in this module. A program is a virtual instrument with two linked windows: a front panel holding controls and indicators, and a block diagram where wires carry data between functions.

Execution follows dataflow, so a node runs only when every input has arrived, and the colour of each wire announces its type: blue integers, orange doubles, green Booleans and pink strings. The chapter then builds the structures that every acquisition VI relies on. For Loops repeat a fixed number of times and can run zero times, while While Loops run at least once and stop when a condition is met.

Tunnels move data across loop edges, shift registers carry a value from one iteration into the next, arrays index from zero, and clusters bundle mixed types such as the error cluster. Timing a loop with a wait, choosing between a chart with history and a graph of whole arrays, and using Boolean or Enum case structures complete the toolkit.

Good practice runs throughout: initialise registers, avoid coercion dots, comment the diagram and stop loops through the conditional terminal.

In this chapter

What this chapter covers

  • 01

    Virtual instruments, subVIs, front panels and block diagrams

  • 02

    Controls, indicators, constants and wire colours

  • 03

    Dataflow execution and explicit type conversion

  • 04

    For Loops, While Loops and tunnel behaviour

  • 05

    Shift registers and why they must be initialised

  • 06

    Arrays, auto-indexing and clusters

  • 07

    Loop timing, charts, graphs and case structures

Worked example · free

Trace a shift register across three runs

Q [5 marks]. A For Loop with its count terminal set to 5 adds the iteration terminal to a value held in a shift register, and the result leaves through the register to an indicator. Give the indicator value on three consecutive runs of the VI when the register is left unwired, and again when it is initialised with 0. Marks used in this example are a revision weighting, not an official University allocation.
Bars give the value leaving a For Loop that adds its iteration counts 0 to 3, over three consecutive runs of the same VI; the uninitialised shift register climbBars give the value leaving a For Loop that adds its iteration counts 0 to 3, over three consecutive runs of the same VI; the uninitialised shift register climbs 6, 12, 18 while the register wired to 0 returns 6 each run. 020 Output value 61218 Run 1Run 2Run 3 Not initialised Initialised to 0
Bars give the value leaving a For Loop that adds its iteration counts 0 to 3, over three consecutive runs of the same VI; the uninitialised shift register climbs 6, 12, 18 while the register wired to 0 returns 6 each run.
  • 2The iteration terminal takes the values 0, 1, 2, 3 and 4, so one complete run of the loop adds 0 + 1 + 2 + 3 + 4 = 10 to whatever the register starts with.
  • 2Left unwired, the register keeps its last value between runs, so the indicator reads 10, then 20, then 30.
  • 1Wired to a constant 0 outside the loop, the register restarts every run, so the indicator reads 10 each time.
Unwired: 10, 20, 30. Initialised with 0: 10, 10, 10. Only the initialised version gives a repeatable result. The mark allocation shown is AskSia's practice weighting and not a University marking scheme.
Sia tip — Before running any loop with a shift register, wire a constant to its left terminal from outside the loop; a growing result on repeated runs is the signature of a missing initial value.
Glossary

Key terms

Virtual instrument
A LabVIEW program, saved as a VI file, made of a front panel and a block diagram.
Shift register
A loop terminal pair that passes the value from one iteration into the next.
Auto-indexed tunnel
A loop boundary terminal that builds an array from, or reads one element of, an array per iteration.
Coercion dot
A marker showing that LabVIEW converted a compatible but different data type at a terminal.
Error cluster
A bundled status, code and source value passed between functions to report problems.
FAQ

LabVIEW Programming Structures FAQ

Do I need to know a text programming language before learning LabVIEW?

No. The lectures state that text-based programming experience is not required, because the language is graphical and built around wiring functions together. What helps instead is reading dataflow: knowing that a node runs when its inputs arrive, that inputs sit on the left of a function, and that wire colour shows the data type.

Repetition does the rest, so practise on any campus computer with simulated data before the hardware sessions.

When should I pick a For Loop rather than a While Loop?

Use a For Loop when the number of repetitions is known, such as generating a block of samples or stepping through an array, and remember it can run zero times. Use a While Loop when the stopping point depends on something happening, such as a Stop button, an error or a tolerance being met. A While Loop always runs at least once, and its iteration terminal starts at zero.

Why does my loop output grow every time I press Run?

An uninitialised shift register keeps the value left from the previous run of the VI, so totals accumulate across runs instead of restarting. Wire a constant to the left-hand register terminal from outside the loop. The same habit avoids other surprises, because the lectures stress that uninitialised values lead to errors and that every shift register should be given a starting value.

What is the difference between a waveform chart and a waveform graph?

A chart stores a history and appends new points as they arrive, which suits slowly changing single values. A graph has no history and redraws a whole array each time, which suits blocks of acquired samples. An XY graph additionally needs separate X and Y arrays of equal length. For block acquisition the graph shows every point received, whereas a chart may show only its recent history.

Study strategy

Assessment move

Treat LabVIEW as a practical skill that grows through repetition rather than a topic to memorise. Start each study session by rebuilding a small VI from an empty block diagram: a numeric control, a conversion from the integer iteration count to a double, a multiply, an indicator, a waveform chart, a Wait function and a Stop button wired to the conditional terminal.

Doing this from memory several times makes the palette locations, the right-click shortcuts and the colour conventions automatic, which frees attention for the acquisition logic later in the semester. Keep context help open with Ctrl+H while you work and read the description of every new function before wiring it. Next, drill the loop structures with paper traces.

Write the iteration number, the shift register value entering and leaving, and the tunnel output for each pass, then run the VI and compare. Do one trace for a For Loop that can run zero times, one for a While Loop that must run once, one for an auto-indexing loop fed by arrays of different lengths, and one for a stacked shift register.

When a result surprises you, the trace usually exposes a missing initial value or an off-by-one stopping test. Then practise data presentation: plot the same values on a chart and on a graph, change the update mode and axis limits, and build an XY graph from two arrays of equal length. Add a case structure selected first by a Boolean and then by an Enum, so you see why many options suit the Enum.

Finally, review your diagrams as a reader would. Remove coercion dots with explicit conversions, add comments, give front-panel objects short labels and longer captions, and make sure everything fits on one screen. The optional challenges posted for the module, and the series estimate of pi, are good tests because they combine loops, shift registers, comparisons and timing in one program, much as the group project will.

A+Everything unlocked
Unlocks this Bible + all 41 of your subjects at The University of Manchester, plus 1,000+ more Bibles across the AskSia library.
Sia - your AERO61021 tutor, unlimited, worked the way the exam marks it
The full 4-page Bible + practice bank with worked solutions
Chrome extension - sync your LMS so Sia knows your deadlines
Bilingual EN / Chinese on every Bible and every Sia answer
$0.99 Trial
30-day money-back · cancel in one tap · how it works