BIOL10401 Chap.9 Microbial Counts and Antibiotic Evidence
Microbial Counts and Antibiotic Evidence
Microbial Counts and Antibiotic Evidence use aseptic transfer, serial dilution and known plated volume to estimate viable cells. A countable plate is divided by plated millilitres and multiplied by reciprocal dilution to obtain CFU per millilitre. Turbidity is not a viable count because dead cells can scatter light.
Antibiotic zones compare growth inhibition under matched conditions, while colony appearance supports description but cannot alone prove species, motility or cell shape.
What this chapter covers
- 01
Aseptic transfer
- 02
Serial dilution
- 03
Countable plates
- 04
CFU per millilitre
- 05
Colony morphology
- 06
Antibiotic inhibition
Worked example · free
Calculate a viable count
- 2Divide 64 by 0.05 mL to obtain 1280 CFU/mL in the dilution.
- 1Multiply by 106 to recover the original culture.
- 1Report 1.28 x 109 CFU/mL.
Key terms
- Colony-forming unit
- A colony-forming unit represents a viable entity capable of producing a visible colony.
- Serial dilution
- A serial dilution reduces concentration through successive known factors.
- Inhibition zone
- An inhibition zone is an area without visible growth around an antimicrobial source.
Microbial Counts and Antibiotic Evidence FAQ
Why use a countable plate?
Crowded colonies merge and sparse plates carry large sampling uncertainty. A countable plate supports a more reliable estimate from the documented dilution. The microbial counts and antibiotic evidence control, unit and inference boundary should also be checked explicitly.
Does absorbance give a viable count?
Not directly. Turbidity can include live cells, dead cells and particles, while a viable count depends on colony formation under the chosen conditions. The microbial counts and antibiotic evidence control, unit and inference boundary should also be checked explicitly.
Can colony shape identify a species?
Colony morphology is useful evidence but does not prove identity. Biochemical, microscopic or molecular tests may be needed to distinguish organisms. The microbial counts and antibiotic evidence control, unit and inference boundary should also be checked explicitly.
Exam move
Write the viable-count equation with colonies, plated millilitres and reciprocal dilution on separate lines. Practise converting microlitres before any arithmetic and use neighbouring dilution expectations as a check. Rehearse aseptic steps that preserve culture identity and representative sampling.
For antibiotic tables, require inhibition evidence for every isolate in a proposed mixed treatment and keep zone comparisons within matched assay conditions. Separate direct growth observations from claims about resistance mechanism or species identity. Draw every viable-count problem as a chain from original culture through labelled dilutions to plated volume and colony number. Convert the plated volume to millilitres first.
Divide colonies by that volume to obtain CFU per millilitre in the plated dilution, then multiply by the reciprocal dilution to estimate the original culture. Preserve CFU per millilitre as an operational unit because a colony can arise from one cell or a clump. A ten-fold dilution should usually produce approximately one tenth as many colonies at the same plated volume while plates remain countable.
Use neighbouring dilutions as internal evidence rather than trusting one isolated number. Attach biological handling to the arithmetic. Mix each tube before taking an aliquot so settled cells do not break the intended dilution factor. Use clean aseptic tools and unambiguous labels at every transfer to protect identity and avoid contamination.
Choose a plate using the stated counting rule: crowded plates hide colonies through overlap, whereas extremely sparse plates carry high sampling uncertainty. If corrected estimates from adjacent acceptable plates disagree by orders of magnitude, inspect mixing, tube labels, transfer volume and colony merging before averaging. A precise calculation from an unrepresentative aliquot remains a poor estimate.
Keep three evidence categories separate on plates. Colony count supports viable concentration under the chosen medium and incubation. Colony morphology describes features such as size, margin, elevation, colour and texture. An inhibition zone reports antimicrobial response under the assay conditions. A circular colony does not prove a coccal cell shape, and a zone does not identify the resistance mechanism.
Use microscopy, biochemical testing or molecular results when species identity is required. State what each observation supports directly and name the additional evidence needed for the stronger claim. For antibiotic comparisons, check inoculum density, agar depth, disc content, incubation and measurement method before comparing zone sizes.
A larger zone can suggest greater susceptibility only within comparable conditions and an appropriate interpretation framework. For a mixed-isolate treatment, find evidence that every isolate is inhibited; averaging one large and one absent response would hide treatment failure for the uninhibited isolate. When the growth lawn is uneven or contaminated, repeat the assay instead of forcing a precise measurement.
End revision answers with the assay result, its conditions and the limit on mechanism or clinical interpretation. Create a final plate dossier containing the dilution chain, plated volume, colony count, morphology description and two-isolate inhibition table. For every conclusion, underline the exact observation that supports it and cross out any species or mechanism claim that lacks a second method.
Working through Microbial Counts and Antibiotic Evidence in BIOL10401? Sia is AskSia’s AI Biology tutor — ask any BIOL10401 Microbial Counts and Antibiotic Evidence question and get a clear, step-by-step explanation grounded in how BIOL10401 is taught and assessed. Read this chapter free, then take your hardest questions to Sia.