The University of Manchester · FACULTY OF BIOLOGY

BIOL10401 Chap.7 Pigments and Chlorophyll Quantification

- one subject, every graph, every model, every mark
6 Chapters2-page Bible
Our own words - no uploaded lecturer files
Updated for this semester
Chapter 7 of 11 · BIOL10401

Pigments and Chlorophyll Quantification

Pigments and Chlorophyll Quantification follow cells through balanced centrifugation, ethanol extraction, a visible scan and fixed-wavelength readings. Chlorophyll mixtures show overlapping spectral features, so scanning supports identification while paired readings at 649 and 665 nanometres feed equations for chlorophyll a and b.

Total chlorophyll is their sum, with a dilution factor applied only when the measured extract was diluted. Matched extraction and blank conditions are essential for treatment comparison.

In this chapter

What this chapter covers

  • 01

    Balanced centrifugation

  • 02

    Ethanol extraction

  • 03

    Pigment spectra

  • 04

    Absorption maxima

  • 05

    Chlorophyll equations

  • 06

    Treatment comparison

Worked example · free

Calculate total chlorophyll

Q [4 marks]. Use A649 = 0.42 and A665 = 0.88 in the published paired equations.
The workflow moves from balanced cell separation through ethanol extraction and a visible scan to fixed readings at 649 and 665 nanometres for pigment calculatiThe workflow moves from balanced cell separation through ethanol extraction and a visible scan to fixed readings at 649 and 665 nanometres for pigment calculation.balance andcentrifugeextract withethanolscan 400 to700 nmread 649 and 665calculate pigments
The workflow moves from balanced cell separation through ethanol extraction and a visible scan to fixed readings at 649 and 665 nanometres for pigment calculation.
  • 1Calculate chlorophyll a as 9.3864 micrograms per millilitre.
  • 1Calculate chlorophyll b as 4.0416 micrograms per millilitre.
  • 2Add them to obtain 13.4280 micrograms per millilitre.
Total chlorophyll is 13.4280 micrograms per millilitre before any stated dilution correction. This original revision allocation for Pigments and Chlorophyll Quantification is not a published university marking scheme.
Sia tip — Keep the two wavelengths beside their absorbances.
Glossary

Key terms

Pigment extract
A pigment extract contains light-absorbing compounds released into a solvent.
Centrifuge balance
Centrifuge balance matches opposing tube mass and geometry.
Total chlorophyll
Total chlorophyll is the calculated sum of chlorophyll a and b.
FAQ

Pigments and Chlorophyll Quantification FAQ

Why use two wavelengths?

Absorbance at both wavelengths contributes to both pigment estimates, allowing the paired equations to separate chlorophyll a and b in a mixture. The pigments and chlorophyll quantification control, unit and inference boundary should also be checked explicitly.

What should the blank contain?

The blank should match the extraction solvent without pigment so its optical contribution is removed from sample readings. The pigments and chlorophyll quantification control, unit and inference boundary should also be checked explicitly.

When is a dilution factor needed?

Apply it when the extract was diluted before measurement, after calculating the concentration represented by the measured cuvette. The pigments and chlorophyll quantification control, unit and inference boundary should also be checked explicitly.

Study strategy

Exam move

Memorise the workflow rather than isolated coefficients: pellet cells, extract in ethanol, scan the visible range, read the two fixed wavelengths and calculate both pigments before adding. Practise substitution with the wavelength labels written explicitly. Check centrifuge balance and identify whether pigment is in the pellet or extract at each stage.

Compare treatment means only after confirming matched volumes, dilution and path length, then state whether the evidence is spectral identity or concentration. Reconstruct the preparation as a material-balance story. Balance opposing centrifuge tubes by mass and compatible geometry, pellet the cells from culture medium and keep track of whether the target material is in the pellet or supernatant.

Ethanol releases pigments from the pellet into the extract. Use ethanol without pigment as the reference so the solvent background is subtracted. A visible scan shows the mixed absorption pattern and helps locate pigment features; fixed readings at 649 and 665 nanometres provide the paired values used for calculation.

Confusing the scan with the concentration step can lead to a correct spectral description but no quantitative result. Write the equations before inserting numbers. Chlorophyll a equals 13.95 times A665 minus 6.88 times A649. Chlorophyll b equals 24.96 times A649 minus 7.32 times A665. Keep the wavelength labels attached to every absorbance so they cannot be swapped.

Retain extra digits through both component calculations, add them for total chlorophyll and round only at the end. If the measured extract was diluted, apply that documented factor once after solving the paired equations. Recalculate the printed components to ensure their sum reproduces the total. Use diagnostic checks for implausible output.

A negative component value should trigger review of blank correction, wavelength entry, transcription, dilution and whether the equation matches the extraction solvent; it should not automatically be presented as negative biological pigment. A smaller absorbance peak can result from less pigment, greater dilution, shorter path length or preparation loss.

Treatment comparison therefore needs matched starting material, extraction volume, path length and instrument handling. Record whether concentration is per extract volume, culture volume, biomass or cell because equal extract concentrations from unequal biomass do not imply equal pigment per cell. Practise separating identification from amount.

Peak positions and the overall scan support a pigment pattern, but overlapping pigments can hide shoulders and prevent certain assignment of every feature. The two-wavelength equations estimate component concentrations under their stated solvent conditions.

In a nitrogen comparison, lower calculated total chlorophyll can be consistent with reduced photosynthetic investment, but the conclusion should first cite treatment data and replicate variation. Finish by stating the direct calculation, the normalisation basis and the bounded biological interpretation.

End with a blind substitution drill in which the two absorbances are presented out of order and one extract has a documented dilution. Label wavelengths first, calculate both components, restore the factor once and audit the total against the printed components.

Working through Pigments and Chlorophyll Quantification in BIOL10401? Sia is AskSia’s AI Biology tutor — ask any BIOL10401 Pigments and Chlorophyll Quantification question and get a clear, step-by-step explanation grounded in how BIOL10401 is taught and assessed. Read this chapter free, then take your hardest questions to Sia.

A+Everything unlocked
Unlocks this Bible + all 41 of your subjects at The University of Manchester, plus 1,000+ more Bibles across the AskSia library.
Sia - your BIOL10401 tutor, unlimited, worked the way the exam marks it
The full 2-page Bible + practice bank with worked solutions
Chrome extension - sync your LMS so Sia knows your deadlines
Bilingual EN / Chinese on every Bible and every Sia answer
$0.99 Trial
30-day money-back · cancel in one tap · how it works