The University of Manchester · FACULTY OF CHEMISTRY

CHEM10530 Chap.6 Mass Spectrometry Instruments

- one subject, every graph, every model, every mark
6 Chapters4-page Bible
Our own words - no uploaded lecturer files
Updated for this semester
Chapter 6 of 9 · CHEM10530

Mass Spectrometry Instruments

Mass Spectrometry Instruments follows ions through source, analyzer and detector. EI, CI and ESI generate different ion families and fragmentation behaviour, so peak assignments begin with ion chemistry. Time-of-flight uses arrival time to separate m/z, while quadrupoles filter or scan stable trajectories.

Resolution, mass accuracy and speed describe different performance dimensions and should never be treated as synonyms.

The source creates the species that the rest of the instrument can measure. Electron ionisation commonly forms radical cations from gas-phase analytes and often produces rich fragmentation. Chemical ionisation uses reagent-gas chemistry to generate softer pseudomolecular evidence.

Electrospray transfers ions from solution and may yield protonated, deprotonated, adducted or multiply charged forms. The base peak is only the most intense detected ion; it is not automatically the molecular ion.

The analyzer acts on mass-to-charge ratio, not neutral molecular mass.

Time-of-flight links arrival time with the square root of m/z under fixed conditions, so a fourfold m/z change produces a twofold time change. A quadrupole stabilises selected trajectories and can transmit a chosen region or scan a range. The two analyzer types therefore reach an m/z spectrum through different physical operations and performance compromises.

Interpretation should proceed backwards through the pipeline.

Identify the ion formula and charge, ask whether that species can be created by the selected source, confirm that the analyzer range can transmit it and then consider the detector response. A missing molecular-ion peak can result from fragmentation, poor ionisation, suppression or acquisition settings rather than molecular absence.

Resolution describes separation of nearby peaks, mass accuracy describes centroid agreement and scan speed describes acquisition over time. Naming the required dimension and predicting how a changed source or collision condition should alter the spectrum turns a follow-up run into a genuine analytical test.

In this chapter

What this chapter covers

  • 01

    Ion motion and m/z

  • 02

    EI radical cations

  • 03

    CI protonation

  • 04

    ESI adducts and charge

  • 05

    Time-of-flight analysis

  • 06

    Quadrupole filters and performance

Worked example · free

Compare ToF arrival times

Q [5 marks]. At fixed conditions an ion at m/z 400 arrives in 20.0 microseconds. Estimate time at m/z 100. The marks shown are not an official University assessment scheme.
The instrument pipeline separates ion creation, mass-to-charge analysis and detection, reminding the reader that every stage influences the peaks finally recordThe instrument pipeline separates ion creation, mass-to-charge analysis and detection, reminding the reader that every stage influences the peaks finally recorded.ion sourceEI, CI or ESImass analyzerToF or quadrupoledetectorion responseeach stage changes what can appear in the spectrum
The instrument pipeline separates ion creation, mass-to-charge analysis and detection, reminding the reader that every stage influences the peaks finally recorded.
  • 3Use the square-root ratio t100/t400 = sqrt(100/400) = 0.5.
  • 2The arrival time is 10.0 microseconds, so the lower m/z ion arrives earlier.
The m/z 100 ion arrives in 10.0 microseconds under the same simplified ToF conditions.
Sia tip — A fourfold m/z change produces a twofold flight-time change in the square-root model.
Glossary

Key terms

Electron ionisation
Gas-phase ionisation that commonly forms radical cations and abundant fragments.
Electrospray ionisation
Solution-based ionisation that commonly forms protonated, deprotonated, adducted or multiply charged ions.
Quadrupole analyzer
An analyzer that transmits selected ion trajectories and can filter or scan m/z.
FAQ

Mass Spectrometry Instruments FAQ

Is the base peak the molecular ion?

Not necessarily. It is the most intense detected ion and may be a stable fragment, an adduct or a charge-state member. Annotate the ion before inferring neutral molecular mass from the peak.

Why use a softer ion source?

Softer ionisation can preserve more molecular or pseudomolecular evidence for fragile or nonvolatile analytes. It can still generate adducts, multiple charge states or fragmentation under the selected conditions.

How do ToF and quadrupole differ?

ToF separates ions through flight-time differences after acceleration. A quadrupole stabilises selected trajectories and can act as a filter or scan through an m/z range.

How should I compare complete mass-spectrometer configurations?

Compare the stages in order: sample introduction, ionisation, mass analysis, detection and data interpretation. At each stage, name the physical property being exploited and the consequence for the ions that reach the detector. Then connect those consequences to the analytical need. A volatile neutral may suit a different inlet and ion source from a polar, thermally fragile analyte.

A filtering analyser offers a different experiment from one that records flight times across a broad range. Include likely ion forms, fragmentation, resolving power, mass accuracy, scan behaviour and compatible sample conditions only when they affect the decision.

End with a conditional recommendation, because an instrument is not universally best: it is appropriate when its operating principle preserves the evidence and performance required for that sample and question.

Study strategy

Exam move

Study the instrument as three linked decisions. For the source, identify sample form, ionisation chemistry, likely charge carrier and expected molecular or fragment evidence. Compare EI, CI and ESI with a table that includes gas-phase requirements, relative energy and adduct behaviour. For the analyzer, derive the direction of ToF flight-time changes and describe how a quadrupole filters or scans ions.

Keep resolution, mass accuracy and acquisition speed in separate columns so one strong specification is not used to imply all others. Annotate every practice peak with a tentative ion formula and charge before converting m/z to mass. Explore how protonation, sodium adduction and multiple charging shift observed values.

Treat absence of a molecular ion cautiously because ionisation, fragmentation, suppression and acquisition range can all remove it. Keep an error log for base peak equated with molecular ion, neutral mass read directly from multiply charged m/z, adduct mass ignored and analyzer function confused with ion source chemistry.

Close each instrument answer by linking source choice, ion family, analyzer mechanism and the specific performance dimension required by the analytical problem.

Working through Mass Spectrometry Instruments in CHEM10530? Sia is AskSia’s AI Chemistry tutor — ask any CHEM10530 Mass Spectrometry Instruments question and get a clear, step-by-step explanation grounded in how CHEM10530 is taught and assessed. Read this chapter free, then take your hardest questions to Sia.

A+Everything unlocked
Unlocks this Bible + all 41 of your subjects at The University of Manchester, plus 1,000+ more Bibles across the AskSia library.
Sia - your CHEM10530 tutor, unlimited, worked the way the exam marks it
The full 4-page Bible + practice bank with worked solutions
Chrome extension - sync your LMS so Sia knows your deadlines
Bilingual EN / Chinese on every Bible and every Sia answer
$0.99 Trial
30-day money-back · cancel in one tap · how it works