EART60061 Chap.5 Error Propagation and Metal Flux Through an Estuary
Error Propagation and Metal Flux Through an Estuary
Error Propagation carries the quality of each measurement through the calculations that combine them. Errors are assumed random and uncorrelated, and they combine in quadrature: absolute errors for sums and differences, fractional errors for products and quotients, and a fractional error multiplied by the exponent for a power. Simple addition would overstate the error at the stated confidence.
The chapter applies the rules to discharge and pollutant loads, carrying units through every step, and then turns to flux through a tidal estuary. Concentration is easy to measure but flux is what predicts concentrations elsewhere, and estuaries make it highly variable through dilution, pH change, adsorption, flocculation, settling, tides, storms and stored metal.
The sampling strategy follows the predictable tidal variation, and the discussion must address the variation it could not sample. A worked consent check shows why a result must be compared with a limit as an interval, and why the confidence level chosen for the error bars can decide the verdict.
What this chapter covers
- 01
Why errors add in quadrature
- 02
Absolute errors for sums and differences
- 03
Fractional errors for products and powers
- 04
Units from discharge to daily load
- 05
Concentration versus flux
- 06
Processes that make estuary flux variable
- 07
Sampling across spring and neap tides
- 08
Judging a load against a discharge consent
Worked example · free
Propagate errors from discharge and concentration to a daily load
- 2Units: m3/s times mg/L gives g/s, because a cubic metre is 1,000 litres and a gram is 1,000 milligrams. Flux = 2.40 times 0.050 = 0.120 g/s.
- 2Fractional error = square root of (0.12/2.40 squared + 0.006/0.050 squared) = square root of (0.0025 + 0.0144) = 0.130.
- 1Daily load = 0.120 g/s times 86,400 s = 10,368 g = 10.37 kg; the exact constant keeps the fractional error at 0.130.
- 1Absolute error = 0.130 times 10.37 = 1.35 kg, so the load is 10.37 plus or minus 1.35 kg per day.
Key terms
- Fractional error
- An error divided by the quantity it belongs to, the form in which errors are combined for products and quotients.
- Hysteresis
- Dependence of a system's response on its history, such as metal flux that depends on how much metal the estuary has stored.
- Flocculation
- The joining of fine particles into larger aggregates in water of high ionic strength, which makes them more likely to settle.
- Conservative behaviour
- Transport of a substance that stays in solution, so that its movement simply follows the movement of the water.
- Discharge consent
- A permitted limit on the mass of a pollutant that may be released, against which a measured load and its error are judged.
- Quadrature
- Combining independent errors as the square root of the sum of their squares, which keeps the stated confidence level.
Error Propagation and Metal Flux Through an Estuary FAQ
Why do errors add in quadrature rather than directly?
Errors have a probability as well as a size. Two independent errors sometimes cancel, so the combined error at the same confidence is smaller than their sum. Adding two 95% errors directly gives a band nearer 97%. Squaring, adding and square rooting keeps the stated confidence.
What happens to the error when I multiply by an exact number?
An exact number such as 86,400 seconds in a day has no error, so the fractional error is unchanged and the absolute error simply scales with the result. A relative error that changes after multiplying by a constant is a sign of an arithmetic mistake.
Why is a negative metal flux not a mistake?
On the sampled spring tide more particulate metal entered the estuary than left it. Because the metal source lies inland, this cannot be the average state; it shows that export happens rarely in large events after stored metal is resuspended, which is evidence of how variable the flux is.
How do I convert discharge and concentration into a mass per day?
Multiply discharge in cubic metres per second by concentration in milligrams per litre to get grams per second, because a cubic metre holds a thousand litres. Multiply by the 86,400 seconds in a day and divide by a thousand for kilograms. Carry the units on every line to catch slips.
Exam move
Work every flux question in two passes: first the numbers with units only, then the errors. Keep a short table of quantity, value, error and fractional error so the quadrature sums are visible. For the estuary material, write the chain of processes from river to sea in your own words and link each one to a sampling decision, ending with the variability that a tidal-cycle design still leaves unsampled.
For practice, recompute a load with one input's error doubled and see how much the final error changes; the input that matters most is the one to measure better.