EART60061 Chap.7 Regression, Significance and Power-Law Rating Curves
Regression, Significance and Power-Law Rating Curves
Regression and Rating Curves treats a relationship between two variables as a model to be tested. Regression gives the equation of the most likely straight line and r squared the share of variation explained, but significance depends on the number of points, so r is converted to t with n minus 2 degrees of freedom and then to a p value.
Dilution implies that concentration is proportional to discharge raised to the power minus one, a power law that straightens on a double-log plot, whereas exponential relationships straighten on a semi-log plot.
The catchment case study improves a weak concentration and discharge relationship step by step: log transformation, splitting rising and falling limbs to capture solute depletion, and removing the hydrogen ion contribution of acidic rain.
The case study also shows that a model can succeed in an engineering sense, predicting concentration from discharge, while its greater value lies in what it reveals about the sources of solute in the catchment. Throughout, every r squared is reported with its p value, because the number of points controls whether a fit means anything.
What this chapter covers
- 01
Regression and correlation
- 02
From r squared to p
- 03
Power laws and double-log plots
- 04
Exponentials and semi-log plots
- 05
Rising and falling limbs
- 06
Separating hydrogen ions from total solutes
- 07
Engineering success versus process understanding
Worked example · free
Decide whether a sulphate and discharge regression is significant
- 1r = square root of 0.30 = 0.548; degrees of freedom = n minus 2 = 13.
- 2t = 0.548 times square root of 13, divided by square root of 0.70: 0.548 times 3.606 / 0.837 = 2.36.
- 2TDIST(2.36, 13, 2) gives p = 0.035, which is below 0.05, so the regression is significant.
Key terms
- Power law
- A relationship of the form y equals x raised to a constant power, which becomes a straight line on a double-log plot.
- Rating curve
- A relationship used to predict a river quantity, here solute concentration, from discharge.
- Electrical conductivity
- A measure of all dissolved ions in water, used as an aggregate indicator of solute concentration.
- Hydrograph limb
- The rising or falling part of a discharge record during a storm event, used to split data in time.
- Double-log plot
- A graph of the logarithm of y against the logarithm of x, on which a power law appears as a straight line.
Regression, Significance and Power-Law Rating Curves FAQ
Why is a straight line the wrong model for concentration against discharge?
If dilution controls concentration, adding water lowers concentration but can never reduce it to zero, while a straight line with a negative slope eventually crosses the axis. Dilution makes concentration proportional to one over volume, a power law, so the data should be tested on a double-log plot.
Why can a high r squared fail to be significant?
With only two points a line always fits perfectly, and with very few points a high r squared can arise by chance. Significance depends on the number of points through the degrees of freedom, so four points with r squared of 0.85 can still give p above 0.05.
Why does splitting the data into rising and falling limbs help?
Solute is more available before a storm peak and depleted after it, so the relationship between concentration and discharge changes over time. Splitting the data builds that time dependence into the model and improves the fit, although fewer points per limb means significance must be rechecked.
How do I calculate p from r squared?
Take the square root of r squared to get r, then compute t as r times the square root of n minus 2, divided by the square root of one minus r squared. Use the t distribution with n minus 2 degrees of freedom and two tails; a p value below 0.05 is significant at 95%.
Why subtract hydrogen ions from conductivity?
Conductivity measures all dissolved ions, but hydrogen ions arrive largely in rain while other ions come from weathering rock. Converting pH to hydrogen ion concentration and removing its share separates the two sources, and on the falling limb this raised r squared from 0.448 to 0.979.
Exam move
Set up a small p-from-r calculator in Excel with cells for r squared and degrees of freedom, and use it on every regression you make. Practise deciding which plot straightens which law before plotting. Then retell the catchment case study as a sequence of model improvements, naming the assumption relaxed at each step and the effect on r squared and p.
Write each model improvement as one line: what you changed, why the process justified it, and the new r squared and p.