ECON10071 Chap.4 Homogeneous Functions and Scaling
Homogeneous Functions and Scaling
Homogeneous Functions and Scaling analyse what happens when every input changes proportionally. A degree r function multiplies output by tʳ when all inputs are multiplied by t. Monomial degrees add across exponents, while every term in a sum must share one common degree.
Degree one gives constant returns to scale; degrees above or below one give increasing or decreasing returns to scale under joint proportional movement.
What this chapter covers
- 01
Joint input scaling
- 02
Degree of homogeneity
- 03
Monomial exponent sums
- 04
Common degree across sums
- 05
Returns to scale
- 06
Euler consistency check
Worked example · free
Test a sum for homogeneity
- 3Substitute tx and ty: sqrt((tx)(ty))=t sqrt(xy), while 2tx=t(2x).
- 2Factor the common t to obtain h(tx,ty)=t h(x,y), so the degree is one.
Key terms
- Homogeneity degree
- The power governing output change under proportional scaling of all inputs.
- Constant returns
- The case where output changes in the same proportion as every input.
- Euler identity
- A derivative relation linking input-weighted partials to the homogeneity degree.
Homogeneous Functions and Scaling FAQ
How do I test a sum of terms?
Scale every input by the same positive factor, simplify each term and compare the powers of that factor. The full function is homogeneous only if one common power factors from every term.
Does degree below one prove concavity?
No. Homogeneity describes proportional scaling, while concavity describes curvature between bundles. Some functions have both properties, but curvature requires a separate derivative, Hessian or inequality argument.
What does constant returns to scale mean?
If all inputs double, output doubles, and more generally multiplying every input by t multiplies output by t. It does not describe changing one input while holding the others fixed.
Exam move
Build a substitution habit: write h(tx,ty), simplify term by term and factor only after all terms are visible. Translate the degree into a proportional statement and keep that statement separate from marginal productivity or curvature. Use Euler's identity as a check on differentiable examples after the scaling degree is known. Revise homogeneity by treating it as a universal substitution test.
Replace every input by the same positive multiple and simplify each term independently. For a monomial, collect the powers of the scaling factor and add the exponents. For a sum, write the scaling power beside every term before attempting to factor. One term with a different degree is enough to show that the whole sum is not homogeneous.
Do not infer a degree from a single numerical bundle, because the required relationship must hold for every admissible input bundle and every positive scaling factor. After finding a degree, translate it twice. First state the algebraic identity linking the scaled function to the original function. Then state the proportional economic meaning: doubling all inputs multiplies output by two raised to the degree.
Degree one gives constant returns to scale, a degree above one gives increasing returns and a positive degree below one gives decreasing returns. Keep this joint movement separate from a marginal product, which changes one input while holding the others fixed. Also keep returns to scale separate from curvature; neither increasing nor decreasing returns alone proves convexity or concavity.
Use Euler's identity as an independent verification tool on differentiable examples. Compute each first partial, multiply it by its own input and add the products. The sum should equal the claimed degree times the original function. If it does not, inspect the collected exponents and derivative coefficients. Check the identity on sums whose terms share a degree as well as on familiar power products.
State the domain, since fractional powers and logarithmic transformations can restrict the values for which the scaling calculation is meaningful. Create contrast pairs for timed practice: one homogeneous sum and one nearly identical nonhomogeneous sum, a degree-one function and a degree below one, and a function with decreasing returns that is not automatically concave.
For each, give the substitution, common factor or mismatch, degree if it exists and the returns classification. Finish with a simple factor such as two or three to check the direction and approximate magnitude of the output change. This numerical check supports the symbolic proof but never replaces it. Add an interpretation audit after every classification.
State which inputs scale, confirm that they all use the same factor and distinguish the output ratio from an absolute output change. If the degree is zero or negative, describe the mathematical scaling implication without importing a standard production interpretation that may not fit the context. Revisit the domain after scaling to ensure the transformed bundle remains admissible.
These checks keep a correct exponent from being attached to an incorrect economic statement. End by comparing scaling with a one-input marginal change using the same function. The two calculations should answer visibly different questions. Writing both prevents a returns-to-scale degree from being used as if it were an elasticity, marginal product or curvature classification.
Working through Homogeneous Functions and Scaling in ECON10071? Sia is AskSia’s AI Mathematics tutor — ask any ECON10071 Homogeneous Functions and Scaling question and get a clear, step-by-step explanation grounded in how ECON10071 is taught and assessed. Read this chapter free, then take your hardest questions to Sia.