The University of Manchester · S1 2026 · FACULTY OF MATHEMATICS

MATH19661 Mathematics 1M1

- one subject, every graph, every model, every mark
11 Chapters53-page Bible
Our own words - no uploaded lecturer files
Built to mirror S1 2026 · updated this semester
The Complete Exam Bible · S1 2026/27

MATH19661 Overview

Mathematics 1M1
— differentiate, integrate, solve and justify every engineering mathematics step
  • 10 credits
  • Level 1
  • Semester 1 2026/27
  • Department of Mathematics

MATH19661 Mathematics 1M1 is the first-semester mathematics module for engineering students at The University of Manchester.

  • Assessed by Written examination 80%, two coursework components at 10% each.
  • Exam shape Recent papers: two hours, seven compulsory questions, 80 marks.
  • Hardest habit Use the method the question names and state every conclusion.
  • How to prepare Problem sheet cold, past-paper question timed, then the feedback.
Why read this guide

What you get in the full MATH19661 Exam Bible

  1. 11 chapters, 53 pages — every examinable topic, week by week
  2. 29 original practice questions, each with a model answer in the Examination format
  3. 11 worked examples, solved the way MATH19661 marks
  4. 20 computed figures, redrawn from the course’s own numbers
  5. Exam-morning plan for the Examination (80%) — what to revise last, where marks are lost

Free on this page: assessment table, chapter map, one worked example, key terms, FAQ. The rest is in the full exam bible.

MATH19661 · The University of Manchester
An independent, AskSia-authored study guide. AskSia is not affiliated with, endorsed by, or sponsored by The University of Manchester; the course code and name are used for identification only.
Assessment

How MATH19661 is assessed

ComponentWeightFormat
Coursework 110%Coursework assessed against the calculus and the vectors and geometry outcomes.
Coursework 210%Coursework assessed against the calculus, complex numbers, and line and multiple integrals outcomes.
Examination80%Written examination across every topic block. Recent January papers ran for two hours with seven compulsory questions worth 80 marks in total.

The three weights come from the official course unit page for MATH19661. The Canvas area for 2026/27 also runs a diagnostic follow-up and a Week 11 coursework assignment; check Canvas for how each is recorded.

Other students are asking · MATH19661

What other students are asking about MATH19661

Where can I find lecture notes or study guides for MATH19661 at manchester?
The MATH19661 study guide in AskSia Library covers Mathematics 1M1 in 11 chapters, with the assessment table, a chapter-by-chapter topic map, key terms and a worked example, free to read on this page.
Is there a final exam in MATH19661, and how much is it worth?
Yes. In the offering this AskSia Library guide is built from, Examination carries 80% of the MATH19661 mark; the full split is Coursework 1 10%, Coursework 2 10%, Examination 80%.
What does MATH19661 cover on integration and the fundamental theorem?
In AskSia Library's MATH19661 guide, the Integration and the Fundamental Theorem chapter explains week 2. Area under a curve, the definite integral, the fundamental theorem of calculus, integration by parts, substitution and partial fractions.
What does MATH19661 cover on macaulay brackets for piecewise functions?
In AskSia Library's MATH19661 guide, the Macaulay Brackets for Piecewise Functions chapter explains week 2. Ramp and step functions, bracket notation, sketching piecewise-linear graphs and differentiating or integrating bracket terms.
What does MATH19661 cover on double integrals on rectangles and disks?
In AskSia Library's MATH19661 guide, the Double Integrals on Rectangles and Disks chapter explains week 3. Iterated integrals over rectangles, polar coordinates with the area element r dr dθ, compound regions and curved boundaries.
Weights, dates and every chapter are set out with their sources further down this page.
Current dates · verify in LMS

Current MATH19661 dates

DateItemControl
12 to 22 October 2026Diagnostic follow-up assessment quizzesThe assessment versions open on Monday of Week 3 and close at 2 pm on Thursday of Week 4.
Week 11Coursework assignmentCanvas sets the coursework assignment for completion on the Friday of Week 11.

Dates are as published in the Semester 1, 2026/27 Canvas pages and the diagnostic follow-up instructions. Confirm exact deadlines and submission settings in the live LMS.

Contents · every chapter, one map

What MATH19661 covers

Eleven chapters follow the teaching sequence from calculus and Macaulay brackets through double and line integrals, numerical methods, vectors and complex numbers to first-order differential equations and probability.

01

Differentiation and Partial Derivatives

Week 1. Chain, product and quotient rules, higher derivatives, partial derivatives, the multivariable chain rule and error estimates.

Differentiation and Partial Derivatives opens the module with the derivative as the gradient of a tangent line and then extends it to functions of two variables.

  • Derivative as tangent gradient
  • Chain, product and quotient rules
  • Higher derivatives and 1D motion
  • Partial derivatives with one variable frozen
  • Second-order and mixed partials
  • Multivariable chain rule along a path
In the full guide: 3 pages · 2 practice questions · 1 figure
02

Integration and the Fundamental Theorem

Week 2. Area under a curve, the definite integral, the fundamental theorem of calculus, integration by parts, substitution and partial fractions.

Integration and the Fundamental Theorem takes the area under a graph, defined as the limit of thin rectangles, and turns it into a calculation you can finish by hand.

  • Definite integral as a signed area
  • Riemann sums and the limit of strips
  • Fundamental theorem, first and second parts
  • Antiderivatives and the constant of integration
  • Integration by parts, including definite limits
  • Substitution with converted limits
In the full guide: 4 pages · 2 practice questions · 1 figure
03

Macaulay Brackets for Piecewise Functions

Week 2. Ramp and step functions, bracket notation, sketching piecewise-linear graphs and differentiating or integrating bracket terms.

Macaulay Brackets for Piecewise Functions gives you a compact way to write graphs built from straight pieces, corners and jumps, which appear in engineering whenever a load, force or signal starts at a particular point.

  • Ramp and step functions
  • Bracket notation and the onset
  • Coefficients as changes of slope
  • Jumps from power-zero brackets
  • Writing a graph as a bracket formula
  • Sketching a graph from a bracket formula
In the full guide: 3 pages · 2 practice questions · 1 figure
04

Double Integrals on Rectangles and Disks

Week 3. Iterated integrals over rectangles, polar coordinates with the area element r dr dθ, compound regions and curved boundaries.

Double Integrals on Rectangles and Disks extends single-variable integration to functions of two variables, where the integral over a region of the plane measures the volume under a surface.

  • Double integral as volume under a surface
  • Iterated integrals over rectangles
  • Fubini's theorem and the order of integration
  • Polar coordinates and the area element
  • Disks, rings and sectors in polar form
  • Compound regions split into rectangles
In the full guide: 3 pages · 2 practice questions · 1 figure
05

Line Integrals and Green's Theorem

Week 4. Line integrals of differential forms, integrals with respect to arc length, orientation and Green's theorem for areas.

Line Integrals and Green's Theorem moves integration off the x-axis and onto curves in the plane.

  • Differential forms and work along a path
  • Parameterising graphs, circles and ellipses
  • Orientation and splitting a path into pieces
  • Line integrals with respect to arc length
  • Statement of Green's theorem for an anticlockwise boundary
  • Area of a region by a boundary line integral
In the full guide: 4 pages · 2 practice questions · 1 figure
06

Numerical Integration and Root Finding

Week 5. Trapezium rule, Simpson's rule, error estimates, the bisection method and Newton-Raphson iteration.

Numerical Integration and Root Finding deals with integrals and equations that have no exact answer in standard functions. The first half approximates a definite integral by sampling the integrand at equally spaced points.

  • Strip width and sampling points
  • Trapezium rule
  • Simpson's rule with an even number of strips
  • Error bounds for both rules
  • Bisection from a sign change
  • Newton-Raphson iteration from tangent lines
In the full guide: 4 pages · 2 practice questions · 1 figure
07

Vectors, Lines and Planes

Weeks 6 and 7. Vector operations, unit vectors, vector equations of lines, the scalar product, angles and equations of planes.

Vectors, Lines and Planes covers the geometry half of the Week 6 and Week 7 lecture notes.

  • Vectors as arrows and as components
  • Unit vectors and the i, j, k notation
  • Vector equation of a line through two points
  • Testing points and intersecting two lines
  • Scalar product and the angle between vectors
  • Acute angle between two lines
In the full guide: 4 pages · 2 practice questions · 1 figure
08

Vector Products and Mechanics

Week 7. The vector product, areas, scalar and vector triple products, volumes, work done by a force and angular momentum.

Vector Products and Mechanics follows the Week 7 lecture notes from the cross product to vectors in physics.

  • Vector product: direction, right-hand rule and length
  • Component formula and determinant memory aid
  • Areas of parallelograms and triangles
  • Scalar triple product and parallelepiped volume
  • Coplanar and collinear tests
  • Vector triple product expansion
In the full guide: 3 pages · 2 practice questions · 1 figure
09

Complex Numbers and Phasors

Week 8. Arithmetic, conjugates, modulus and argument, the Argand diagram, exponential form, De Moivre's theorem, roots and phasors.

Complex Numbers and Phasors works through the Week 8 lecture notes on complex numbers.

  • Standard form, real and imaginary parts
  • Arithmetic and division by the conjugate
  • Quadratics with complex roots
  • Modulus, argument and the quadrant rule
  • Euler's formula and exponential form
  • De Moivre's theorem and nth roots on the Argand diagram
In the full guide: 4 pages · 2 practice questions · 1 figure
10

First-Order Differential Equations

Weeks 9 and 10. Classifying ODEs, initial conditions, separable, homogeneous, linear and exact equations and integrating factors.

First-Order Differential Equations covers Weeks 9 and 10 of the lecture notes and the sixth question of every recent January paper.

  • Order, general and particular solutions
  • Classifying linear, separable, homogeneous and exact equations
  • Separation of variables
  • Homogeneous type with the substitution y = vx
  • Integrating factor for linear equations
  • Exact equations and potential functions
In the full guide: 4 pages · 2 practice questions · 1 figure
11

Probability and Conditional Probability

Week 11. Sample spaces, events, the axioms, equally likely outcomes, conditional probability, independence and Bayes' theorem.

Probability and Conditional Probability covers the Week 11 lecture notes and the final question of each January paper.

  • Sample spaces, outcomes and events
  • Union, intersection, complement and disjoint events
  • Kolmogorov's axioms and the union rule
  • Counting with equally likely outcomes
  • Conditional probability
  • Testing independence with a reason
In the full guide: 3 pages · 2 practice questions · 1 figure

Its stated aim is a broad grounding in calculus and algebra for students arriving with A-level mathematics or an equivalent qualification, with the emphasis on the methods later engineering modules rely on. Teaching runs over eleven weeks.

The first two revisit and extend differentiation and integration, including partial derivatives, error estimates, integration by parts, substitution, partial fractions and Macaulay brackets for piecewise functions. Weeks 3 and 4 introduce double integrals on rectangles and disks, followed by line integrals and Green's theorem.

Week 5 turns to numerical methods: the trapezium rule, Simpson's rule, bisection and Newton-Raphson iteration.

The second half of the semester covers vectors, lines and planes, scalar, vector and triple products with applications in mechanics, then complex numbers from arithmetic to exponential form, De Moivre's theorem, roots and phasors.

Weeks 9 and 10 solve first-order ordinary differential equations of separable, homogeneous, linear and exact type, and Week 11 introduces probability through sample spaces, conditional probability and independence.

Each week pairs two hours of lectures with a tutorial and a problem sheet that has full solutions.

The official course unit page sets the written examination at 80% of the module, with two coursework components worth 10% each. Recent January papers lasted two hours and asked students to answer all seven questions for 80 marks, with one question per major topic block.

Since 2025 the paper no longer comes with a separate formula book, so the relations you need must be known or will be printed inside the question. This guide follows the same topic order and concentrates on the steps the examiners' feedback says students most often lose.

Worked example · free

Estimate the volume error of a measured cylinder

Q [6 marks]. A cylinder has measured radius r = 5.0 ± 0.1 cm and height h = 12.0 ± 0.2 cm. Find its volume V = πr²h and use partial derivatives to estimate the uncertainty in V. The marks shown are an original practice allocation, not a published university marking scheme.
The orange curve is f(x) = 0.25x² + 0.5 and the green tangent touches it at x = 2.The orange curve is f(x) = 0.25x² + 0.5 and the green tangent touches it at x = 2. Moving 1.2 along the axis, the tangent predicts a rise of 1.2 while the curve actually rises 1.56, which is why a derivative error estimate is only approximate.x0 = 2x0 + 1.2dx = 1.2estimate 1.2true 1.56tangent linecurve f(x)x
The orange curve is f(x) = 0.25x² + 0.5 and the green tangent touches it at x = 2. Moving 1.2 along the axis, the tangent predicts a rise of 1.2 while the curve actually rises 1.56, which is why a derivative error estimate is only approximate.
  • 1Volume: V = π × 5.0² × 12.0 = 300π, about 942.5 cubic centimetres.
  • 2Partial with respect to r: 2πrh = 120π, about 376.99. Partial with respect to h: πr² = 25π, about 78.54.
  • 2Combine magnitudes: 376.99 × 0.1 + 78.54 × 0.2 = 37.70 + 15.71 = 53.41.
  • 1State the result: V = 942.5 ± 53.4 cubic centimetres, a relative uncertainty of about 5.7%.
V is about 942.5 ± 53.4 cubic centimetres. The radius contributes more than twice as much uncertainty as the height because volume depends on the square of the radius.
Sia tip — Before combining, check which input dominates: a squared input doubles its own relative uncertainty in the result.
Glossary

Key terms

Partial derivative
The rate of change of a function of several variables with respect to one of them, holding the rest constant.
Integration by parts
A method that rewrites the integral of a product using the reverse of the product rule.
Macaulay bracket
Notation for a function that is zero before a given point and equal to a power of the distance beyond it.
Double integral
An integral of a function of two variables over a region of the plane, evaluated as two single integrals.
Line integral
An integral of a function or differential form taken along a curve with a chosen direction.
Green's theorem
A result equating an anticlockwise line integral round a closed curve with a double integral over the enclosed region.
Simpson's rule
A numerical integration formula that fits parabolas through pairs of strips and needs an even number of strips.
Newton-Raphson method
An iterative root-finding method that follows the tangent line at the current estimate to the axis.
Vector product
An operation giving a vector perpendicular to two vectors with length equal to the area of their parallelogram.
Argand diagram
A plane in which a complex number is plotted with its real part across and its imaginary part up.
Integrating factor
A multiplier that turns a first-order linear differential equation into the derivative of a single product.
Conditional probability
The probability of one event once another event is known to have occurred.
Phasor
A complex number recording the amplitude and phase of a sinusoidal signal at a fixed frequency.
FAQ

MATH19661 FAQ

How hard is Mathematics 1M1?

The evidence points to breadth rather than any single hard idea. The examination carries 80% of the module and recent papers asked for all seven questions in two hours, one per topic block, so there is no option to skip vectors or probability. Examiner feedback repeatedly names careless signs, unstated conclusions and ignoring the method a question specifies among the recurring sources of lost marks.

How is the module assessed?

The official course unit page lists a written examination worth 80% and two coursework components worth 10% each. The coursework is tied to calculus, vectors and geometry, complex numbers, and line and multiple integrals. Canvas also runs a diagnostic follow-up in Weeks 3 and 4 and a coursework assignment in Week 11, so check how each one is recorded.

What does the January exam look like?

Recent papers ran for two hours and asked students to answer all seven questions, with 80 marks available. The questions follow a stable pattern: calculus with Macaulay brackets, numerical methods, vectors, complex numbers, double integrals with Green's theorem, differential equations and probability. Individual parts usually carry between one and seven marks.

Which calculators are allowed in the exam?

The front page of the January 2025 paper allows calculators only if they cannot store text, perform algebra or draw graphs. Practise with the exact model you will take into the room, and set it to radians before any Newton-Raphson or trigonometric work, because feedback reports students working in degrees.

Is there a formula sheet in the exam?

Papers before 2025 came with a booklet of mathematical formula tables, but from 2025 onwards that booklet is not used. Where a formula is needed, it may be printed inside the question, as Simpson's rule and the Newton-Raphson step were in 2025. Expect to recall standard derivatives, integrals and identities yourself.

Are past papers and solutions available?

Canvas provides January papers from 2018 to 2025, except January 2021, together with solutions and, for recent years, feedback documents that discuss common errors. The practice questions in this guide are original and follow the question types those papers show, so use the real papers for timed rehearsal under exam conditions.

What is the diagnostic follow-up?

Early in the semester students sit a diagnostic test, and sections where they underachieved lead to practice quizzes and a single assessment attempt on an online system. Your mark draws on the strongest practice run together with the one assessment run. The 2026 instructions describe this work as AI forbidden and set its window for 12 to 22 October.

How should I plan revision for the January exam?

Work by topic block in teaching order, because the paper does. For each block, redo the problem sheet cold, then one past-paper question under time, then read that year's feedback. Leave the last fortnight for full two-hour papers. Give extra time to Green's theorem, Macaulay brackets and the integrating factor, where feedback records the most avoidable losses.

Chapter questions

Questions students ask in each MATH19661 chapter

How do I know which differentiation rule to use first?
Look at the outermost operation. A product of two factors calls for the product rule, a fraction for the quotient rule and a function inside another function for the chain rule. Many exam parts nest these, so apply the outer rule first and differentiate each inner piece separately. Chapter 01 · Differentiation and Partial Derivatives
Is a definite integral the same as the area under the curve?
Only when the graph stays above the horizontal axis. The definite integral counts regions below the axis as negative, so positive and negative pieces can cancel. If a question asks for the geometric area, find where the graph crosses the axis, integrate each piece separately and add the magnitudes. Chapter 02 · Integration and the Fundamental Theorem
Why is the coefficient of a ramp not the slope of that piece?
Brackets never switch off on their own. Once a ramp starts it keeps contributing its gradient forever to the right, so a later bracket only adds to whatever slope is already there. The coefficient therefore records how much the slope alters at the corner, and the actual slope is the running total. Chapter 03 · Macaulay Brackets for Piecewise Functions
Where does the extra r in polar coordinates come from?
A small polar patch is bounded by two arcs and two radial lines. Its radial side has length dr, but its curved side has length r dθ, because arc length equals radius times angle in radians. Multiplying those sides gives r dr dθ, and that factor must appear in every polar double integral. Chapter 04 · Double Integrals on Rectangles and Disks
Why does the direction of the curve matter?
A line integral of a differential form adds signed contributions along the path, so walking it the other way negates every step. The result is the same number with the opposite sign, exactly as swapping the limits of an ordinary definite integral does. Arrows on a sketch are the simplest way to keep the direction under control. Chapter 05 · Line Integrals and Green's Theorem
Why must Simpson's rule use an even number of strips?
Each application of Simpson's rule covers two strips with a single parabola through three points. The last point of one pair is the first point of the next, so the strips have to pair off exactly. With an odd count one strip would be left over with no parabola to cover it. Chapter 06 · Numerical Integration and Root Finding
Why is the line through A and B not OA plus t times OB?
The vector OB points from the origin to B, not along the line, so adding multiples of it to OA traces a different line that passes through A but generally misses B. The direction you need is the displacement from A to B, which is b minus a. Substituting t equal to one is a quick way to catch the slip. Chapter 07 · Vectors, Lines and Planes
When should I use a cross product instead of a dot product?
Use a cross product when you need a vector perpendicular to two given directions, such as a normal to a plane, or an area or angular momentum. Use a dot product when you need a number measuring alignment, such as an angle, a component along a direction or the work done by a force. Recent feedback mentions scripts that swapped the two. Chapter 08 · Vector Products and Mechanics
How do I find the argument without landing in the wrong quadrant?
Plot the point first and note which quadrant it is in. Arctan of b over a is correct only when a is positive. In the second quadrant add pi to that value, in the third subtract pi, and on the imaginary axis use plus or minus a half pi. Expanding your answer back to standard form is a reliable check. Chapter 09 · Complex Numbers and Phasors
How do I decide which method to use on a first-order equation?
Rewrite it with dy/dx alone on the left and test the families in turn: linear, separable, homogeneous type, then exact. Write down the family you found before you start, because recent official solutions award a mark for recognising the type, and the right method follows directly from it. Chapter 10 · First-Order Differential Equations
How do I show that two events are independent?
Compute the product of the two separate probabilities and compare it with the given or calculated probability of both events. Write both numbers and state whether they match. The official 2025 solutions gave no credit to a plain yes, so the comparison itself is the answer the mark rewards. Chapter 11 · Probability and Conditional Probability
Study strategy

How to study for the exam

Treat Mathematics 1M1 as eleven short toolkits that the January paper samples evenly. Each week, attempt the problem sheet before the tutorial, then compare your work with the published solutions and record the cause of every error: a sign, a missed rule, a wrong orientation, degrees instead of radians or an unstated conclusion. Keep that list on one page and reread it before each past paper.

From late November, take one past-paper question per topic block under time, then read the feedback document for that year to see how markers judged it. In the final two weeks, sit complete two-hour papers from different years and mark them against the solutions. Because the formula book has gone, practise writing standard derivatives, integrals, trigonometric identities and the Simpson and Newton-Raphson formulas from memory.

Finally, train the habit the feedback keeps asking for: a short sentence of explanation between lines of working, and a boxed final answer in the form the question requested.

Study MATH19661 with AI

Your AI Mathematics tutor for MATH19661

Stuck on a hard MATH19661 question? Sia is AskSia’s AI Mathematics tutor — ask any MATH19661 Mathematics 1M1 question and get a clear, step-by-step explanation grounded in how the course is actually taught and assessed. Read this whole study guide free, then take your hardest questions to Sia.

A+Everything unlocked
Unlocks this Bible + all 41 of your subjects at The University of Manchester, plus 1,000+ more Bibles across the AskSia library.
Sia - your MATH19661 tutor, unlimited, worked the way the exam marks it
The full 53-page Bible + practice bank with worked solutions
Chrome extension - sync your LMS so Sia knows your deadlines
Bilingual EN / Chinese on every Bible and every Sia answer
$0.99 Trial
30-day money-back · cancel in one tap · how it works