CCME0141 Introduction to Creative Media Practice - Making the Media I
CCME0141 Overview
- 15 credits
- University College London
- Term 1 2026/27
- In person
- Level 4
CCME0141 Introduction to Creative Media Practice - Making the Media I is a practice-led introduction to contemporary creative media at University College London.
- Assessment route Build the collaborative film and individual games portfolio as distinct but connected production processes.
- Creative method Translate intention into an observable test before choosing a tool or technique.
- Workflow discipline Repair the earliest broken relation before polishing later stages.
- Evidence quality Keep comparisons that explain why a decision changed the artefact.
What you get in the full CCME0141 Study & Assessment Guide
- 11 chapters, 49 pages — every assessed topic
- 31 original practice questions, most with model answers
- 11 worked examples, solved the way CCME0141 marks
- 12 computed figures, redrawn from the course’s own numbers
- Before-you-submit checklist for the Film Project (50%) — what markers reward, what costs marks
Free on this page: assessment table, chapter map, one worked example, key terms, FAQ. The rest is in the full study & assessment guide.
How CCME0141 is assessed
| Component | Weight | Format |
|---|---|---|
| Film Project | 50% | Group film outcome with individual cover-sheet submission. Current captured due point: 16 November 2026 at 1pm. |
| Games Project Portfolio | 50% | Individual cinematic render, Blender project file, PDF production dossier and critical reflection. Current captured due point: 14 December 2026 at 1pm. |
The Film Project and Games Project Portfolio weights are stated in the captured Moodle module materials and agree with the official UCL catalogue category split.
What other students are asking about CCME0141
- Where can I find lecture notes or study guides for CCME0141 at ucl?
- The CCME0141 study guide in AskSia Library covers Introduction to Creative Media Practice - Making the Media I in 11 chapters, with the assessment table, a chapter-by-chapter topic map, key terms and a worked example, free to read on this page.
- Is there a final exam in CCME0141?
- No final exam is listed in the offering this AskSia Library guide is built from; CCME0141 is assessed by Film Project 50%, Games Project Portfolio 50%.
- What does CCME0141 cover on camera, light and sound?
- In AskSia Library's CCME0141 guide, the Camera, Light and Sound chapter explains cinematography, exposure, composition, lighting, recording and the control of audience attention.
- What does CCME0141 cover on film language and screen grammar?
- In AskSia Library's CCME0141 guide, the Film Language and Screen Grammar chapter explains story, scene, shot, continuity, juxtaposition, image-sound relations and audience inference.
- What does CCME0141 cover on editing and post-production?
- In AskSia Library's CCME0141 guide, the Editing and Post-production chapter explains organisation, selection, rough cuts, rhythm, sound, colour, versioning and export verification.
Current CCME0141 dates
| Date | Item | Control |
|---|---|---|
| 16 November 2026, 1pm | Film Project | Current captured Moodle submission point. |
| 14 December 2026, 1pm | Games Project Portfolio | Current captured Moodle submission point; the contradictory weekday is omitted. |
Dates are as published in the Captured UCL Moodle submission pages for the 2026/27 offering. Confirm exact deadlines and submission settings in the live LMS.
What CCME0141 covers
Eleven chapters follow the production route from storytelling and film craft through games, Blender character work, virtual cinematography, documentation and critical reflection.
Story and Creative Process
Creative intention, practice-based research, testable questions, iteration and audience evidence.Story and Creative Process connects creative intention with practice-based research. A workable project question names an audience experience, selects a practical method and leaves evidence that can be evaluated.
- Creative intention
- Practice-based research
- Audience experience
- Testable questions
- Iteration evidence
- Reflective action
Camera, Light and Sound
Cinematography, exposure, composition, lighting, recording and the control of audience attention.Camera, Light and Sound treats cinematography and recording as one attention system. Camera position and lens behaviour decide what the audience can see and how space feels. Light separates forms, reveals texture, motivates focus and creates mood.
- Camera position
- Lens and distance
- Lighting function
- Sound perspective
- Audience attention
- Capture continuity
Film Language and Screen Grammar
Story, scene, shot, continuity, juxtaposition, image-sound relations and audience inference.Film Language and Screen Grammar explains how separate images and sounds produce inference.
- Story scale
- Scene action
- Shot purpose
- Spatial continuity
- Juxtaposition
- Image-sound relation
Editing and Post-production
Organisation, selection, rough cuts, rhythm, sound, colour, versioning and export verification.Editing and Post-production organises captured material into a coherent experience through selection, order, duration and the relation between image and sound.
- Media organisation
- Selects
- Rough cut
- Information order
- Sound bridge
- Export verification
Collaborative Film Production
Creative roles, pre-production, team handoffs, constraint management and professional collaboration.Collaborative Film Production turns roles into dependable handoffs across development, pre-production, production and post-production.
- Production roles
- Pre-production
- Team handoffs
- Constraint response
- Media management
- Retrospective
Games, Narrative and Mechanics
Rules, systems, agency, feedback, ludology and the alignment of play with narrative meaning.Games, Narrative and Mechanics studies meaning through both represented story and designed action. Narratology examines plot, character, viewpoint and temporality, while ludology examines mechanics, rules and systems.
- Narratology
- Ludology
- Mechanics
- Player agency
- Feedback
- Ludic harmony
Modelling Characters in Blender
Reference alignment, polygonal form, silhouette, topology, naming and deformation-aware modelling.Modelling Characters in Blender develops polygonal form from aligned front and side references. The workflow begins with viewport control, coordinate awareness and primary masses rather than surface detail.
- Reference alignment
- Primary masses
- Silhouette
- Polygon topology
- Joint deformation
- Scene organisation
UV Editing, Materials and Shading
Seams, unwrapping, texture scale, material response, shader nodes and controlled lighting tests.UV Editing, Materials and Shading separates surface mapping from material response. Marked seams allow a three-dimensional mesh to unfold into two-dimensional islands, where scale and distortion affect texture placement.
- UV seams
- Unwrapping
- Island scale
- Texture alignment
- Material response
- Shader diagnosis
Rigging, Skinning and Walk Cycles
Armature hierarchy, constraints, vertex influence, key poses, root travel and motion diagnosis.Rigging, Skinning and Walk Cycles connects a character mesh to a controllable armature and then builds motion through timed poses. Bone placement, naming, hierarchy and constraints define how controls propagate.
- Armature hierarchy
- Bone constraints
- Automatic weights
- Vertex influence
- Walk poses
- Root travel
Cameras, Lighting and Render Pipelines
EEVEE, virtual composition, scene lighting, camera animation, image sequences and video delivery.Cameras, Lighting and Render Pipelines follows the virtual scene from render-engine choice through composition, illumination, camera animation and output.
- EEVEE and Cycles
- Scene composition
- Light types
- Camera lens
- Camera animation
- Image sequence
Production Dossier and Critical Reflection
Workflow screenshots, annotation, research, evaluative writing, academic integrity and future practice.Production Dossier and Critical Reflection turn production traces into evidence of decision-making.
- Evidence selection
- Screenshot annotation
- Research sources
- Decision evaluation
- Critical reflection
- Future practice
It connects film, games and immersive media through a shared method: define an intention, choose a practical approach, make and test an artefact, document the decisions and evaluate what the result teaches. The film part develops collaborative production through story development, cinematography, light, sound, screen grammar, editing and team handoffs.
The games part moves into individual Blender work through character modelling, UV editing, materials, rigging, skinning, animation, virtual lighting, cameras and rendering.
The module result is divided between the Film Project and Games Project Portfolio. The first is a collaborative film outcome supported by individual submission actions.
The second is an individual portfolio containing a cinematic render, editable Blender project, production dossier and critical reflection. This guide treats those deliverables as one evidence system.
A finished video cannot explain a production choice by itself; the project file, screenshots, annotations and reflection show how the work developed, how problems were solved and how research informed practice.
The most useful revision is therefore active.
Rebuild a shot plan from an intention, diagnose a rough cut, compare a UV checker before and after repair, test a rig in the poses the character needs, render a short sequence with final settings and write an evaluative paragraph from real evidence. The chapters use original fictional cases so you can rehearse decisions without copying assessed work.
The aim is to make every technical choice answer a creative question and every reflective claim point back to an observable artefact.
Worked example · free
Turn a creative intention into one testable production decision
- 1State the audience effect in observable language: uncertainty must appear before any explanation.
- 1Hold a wider frame with meaningful empty doorway space, then delay the visitor reveal.
- 1Introduce a restrained off-screen key or clothing sound before the person enters the frame.
- 1Compare a version with and without the early sound cue while keeping the action and location stable.
- 1Ask viewers what relation they infer and identify which cue produced the uncertainty.
Key terms
- Practice-based research
- A method that develops knowledge through documented making, testing and reflection.
- Creative intention
- The experience, idea or relation a maker aims to communicate through formal decisions.
- Screen grammar
- The conventions and relations through which shots and sounds communicate space, time, cause and attention.
- Rough cut
- An early complete assembly used to test structure, information and rhythm before finishing.
- Ludology
- The study of games through mechanics, rules, systems and gameplay.
- Player agency
- The meaningful capacity a game gives a player to choose actions and influence outcomes.
- Polygonal modelling
- The construction of three-dimensional form by arranging vertices, edges and faces.
- UV map
- A two-dimensional coordinate layout that places texture information on a three-dimensional surface.
- Armature
- A hierarchy of bones and controls used to pose and animate a character.
- Skinning
- The attachment of a mesh to an armature so bone movement deforms the surface.
- Render pipeline
- The connected settings and processes that convert a scene into images and video.
- Critical reflection
- An evidence-based evaluation of decisions, results, limits and implications for later practice.
CCME0141 FAQ
How is the module assessed?
The Film Project contributes 50% and the Games Project Portfolio contributes 50%. The film is assessed as a collaborative group outcome, while the games portfolio is individual and includes a cinematic render, Blender project file, production dossier and critical reflection. Recheck the live Moodle pages before each submission.
What should I keep from the Film Project?
Retain the planning and production evidence that explains your responsibilities and decisions: relevant schedules, storyboards, shot or sound plans, tests, notes and rough versions. The material should help you evaluate collaboration and creative choices later, rather than becoming an unfiltered archive of every file.
What belongs in the Games Project Portfolio?
The captured brief names a cinematic render, the Blender project file, supporting materials formatted as a PDF production dossier and a short critical reflection. The workflow evidence should cover modelling, UV and texture work, rigging and animation, plus camera, lighting and rendering decisions.
How can I make the production dossier analytical?
Select screenshots that prove a problem, choice or change. Annotate what the reader should notice, explain why the action was taken, compare the result with the intention and state what remained unresolved. A sequence of interface screenshots without a decision does not demonstrate the production reasoning.
What makes a critical reflection effective?
Effective reflection moves from evidence to evaluation. It names a decision, points to the result, relates the choice to research or practice, judges its effectiveness and identifies a concrete change for later work. Description supplies context, but the value comes from explaining why the outcome matters.
How should I debug a Blender workflow problem?
Trace the earliest broken relation. Check form before texture, UV layout before shader polish, armature and weights before animation, then lighting, camera and output settings. Change one layer at a time, repeat the same test and document the comparison so the repair can support the dossier.
Questions students ask in each CCME0141 chapter
- How can a reference influence the work without becoming a copied solution?
- Begin by naming the precise quality being studied: perhaps the timing of withheld information, the organisation of space, the relation between player choice and consequence, or a method for recording process. Describe that quality without relying on the reference title. Then compare at least two examples so the inquiry concerns a relation rather than the surface identity of one work. Translate the observation into a constraint or test for the current project. For example, instead of reproducing a recognisable composition, test whether empty frame space delays a reveal under the conditions of your own location and story. Record what was borrowed at the level of method, what changed because of the new context and where the result departed from the reference. Cite the source accurately in the production documentation, but do not use citation as a substitute for explaining influence. Keep early sketches or test versions that show the transformation from observation to independent decision. Finally, judge the result against the project intention, not against how closely it resembles the source. A useful reference expands the available questions, vocabulary or procedure. It should not predetermine the finished artefact, supply an unexamined aesthetic answer or obscure the maker's own evidence. This approach also strengthens reflection because the writer can explain what a source enabled, what proved unsuitable and how practical testing produced a different outcome. Chapter 01 · Story and Creative Process
- How can I practise camera, light and sound as one system?
- Stage a short action in one controllable location and define the detail the viewer should notice first. Begin with a locked camera and record a baseline while monitoring the actual microphone signal. Change camera distance or height once, keeping performance and lighting stable, and note how the environment and subject relation changes. Return to the chosen framing, move or modify one light and compare separation, texture, shadow and exposure on the recorded image. Finally, keep picture conditions stable while testing two microphone positions and one off-screen cue. Screen the resulting combinations at normal playback speed. Write the first visual or sonic cue noticed in each version and whether that order supports the scene. Diagnose problems by channel before changing equipment: composition and focus for camera, direction and contrast for light, source distance and unwanted noise for sound. Retain a frame grab, a simple placement diagram, a short audio note and the reason for the selected combination. Then create a continuity card with camera position, focal setting, height, exposure, white balance, light placement, microphone channel and any condition that could drift. Repeat the action after moving one item and use the card to restore the setup. The exercise is complete when the chosen version can be explained as an audience decision, not merely as the cleanest image or loudest recording, and when another crew member could reconstruct the essential setup from the evidence. Chapter 02 · Camera, Light and Sound
- What exercise reveals whether a sequence has clear screen grammar?
- Film a simple action with a beginning, a change and a consequence, using no dialogue and no more than six planned shots. Before shooting, write what the audience should know after each cut. Draw the screen direction, eyelines and important entrances on a small floor plan. Capture a wide relation, a purposeful detail, an action match and a reaction, plus clean sound that can bridge at least one edit. Assemble a first version in chronological order. Then duplicate it and change only the information order or the duration of one withheld detail. Screen both versions without explaining the intended reading and ask viewers to recount the action, location and cause of the change. Mark the first point where accounts diverge. Inspect whether the fault belongs to spatial orientation, temporal order, causal information, attention or sound continuity. Repair that relation with the smallest available edit rather than adding every unused angle. Keep the storyboard, floor plan, both assemblies and a note linking the observed misunderstanding to the repair. Analyse each retained shot by function: establish a relation, direct attention, show a cause, reveal a consequence or create a deliberate gap. If two adjacent shots perform the same function without changing emphasis or rhythm, test removing one. The exercise demonstrates that grammar is created between shots, actions and sounds. It also makes a purposeful discontinuity possible because the stable relation and the intended break can be compared rather than defended through intuition alone. Chapter 03 · Film Language and Screen Grammar
- How should I run a disciplined recut exercise?
- Choose a sequence short enough to watch repeatedly and preserve an untouched assembly. Label the first duplicate with the structural question it will test, not with a generic version number. Watch from beginning to end and write only moments where information is unclear, arrives too soon or produces no consequence. Select the strongest problem and make a structural pass that changes order or removes repetition without adjusting colour or decorative effects. Export and watch that version outside the editing application. Next make a performance and rhythm pass, comparing reaction duration, pauses and action energy while keeping the new structure stable. Add a sound pass that checks dialogue intelligibility, room tone, bridges, perspective and the timing of off-screen cues. Only after these relations work should a finishing pass address colour consistency, titles and delivery. For each pass, record the question, exact change, visible or audible result and any new problem introduced. Ask a viewer to describe the scene rather than simply choose a favourite version. Translate feedback into a testable relation and avoid changing several layers at once. Finish by exporting with the intended dimensions, frame rate, codec and audio configuration, then verify the first frame, last frame, runtime, peaks and filename. Keep one before-and-after pair that proves the central edit decision. The exercise teaches that post-production is a sequence of different questions and that a reliable delivery file is part of editorial craft rather than a final administrative gesture. Chapter 04 · Editing and Post-production
- What rehearsal exposes collaboration problems before the shoot?
- Run a miniature production handoff using one scene and a deliberately limited setup. Begin with a shared statement of the audience intention and identify the decisions owned by direction, production, camera, sound, performance and post-production. Each role prepares only the document or test needed by the next role. Walk through arrival, setup, rehearsal, take, media handoff and first edit while one person records assumptions that were not stated. Introduce a plausible constraint, such as losing ten minutes, a noisy position or an unavailable prop. Before proposing solutions, restate the intention that must survive. List the departments affected, choose the smallest viable response, assign an owner and specify the next confirmation. After one recorded take, practise media naming, backup, sound identification and an editor handoff. Ask the editor to locate the intended take and understand any continuity issue without verbal rescue from the crew. Conduct a short retrospective around the artefacts: which handoff supplied enough context, which decision arrived late, which responsibility was ambiguous and what process would change next time. Retain the original plan, revised action note, one setup image and the handoff record. Do not use the review to attribute blame or celebrate busyness. Evaluate whether the team communicated changes through a protected creative aim and whether another person could act on the information. The exercise turns collaboration into observable dependencies, responses and shared verification rather than a list of role titles or an idealised account written after completion. Chapter 05 · Collaborative Film Production
- How can I test whether a mechanic carries narrative meaning?
- Select one repeated choice and write the complete system chain: available action, governing rule, immediate feedback, resource change, later consequence and implied value. Describe what the story says about the choice separately from what efficient play rewards. Build or isolate the smallest playable state in which the choice matters. Give a participant only the information required to begin, then observe what they try, repeat and avoid. Record where they hesitate, which feedback they notice and whether the later consequence changes the next decision. Ask them to explain their understanding after playing, but compare that account with their actual behaviour. If one option dominates, identify whether cost, timing, information or feedback removes the trade-off. Change one of those relations and repeat the same task. Use a matrix of agency and thematic alignment to compare versions: can the player act differently, do outcomes differ and does the system support or resist the represented value? State the boundary of the test. A small session can reveal confusion, invisible consequences or an obviously dominant strategy, but it cannot establish universal player meaning. Preserve the state values, observation notes, participant explanation and one proposed rule revision. Conclude with a design claim that can be challenged: the rule encourages a particular behaviour, the feedback makes that value legible or obscure, and the next prototype will test a specified change. This is stronger than calling the mechanic immersive, balanced or meaningful without a traceable system relation. Chapter 06 · Games, Narrative and Mechanics
- What is a useful character blockout and deformation exercise?
- Prepare aligned front and side references with a common ground, centre and major landmarks. Build only the head, torso, pelvis and limbs as simple masses, then rotate through front, profile, three-quarter and top views after every substantial change. Record a turntable or four-view sheet before adding detail. Identify the final camera distance and check whether the silhouette communicates the character at that scale. Add simple connections and enough topology to test one shoulder, elbow, hip and knee bend. Use a temporary armature or direct pose; the purpose is diagnosis, not a finished rig. Inspect volume loss, pinching, unwanted intersections and edge density transitions. When a fault appears, return to the earliest responsible layer: reference alignment, mass depth, attachment position or edge flow. Change one relation and repeat the same pose and view. Do not add subdivision or sculpted detail merely to make the still frame smoother. Name objects, preserve a stable milestone and capture the failed state, relevant wireframe and corrected pose under comparable display settings. Finish with a cleanup pass that checks centre seams, normals, origins and hidden duplicate geometry. Explain each retained loop by silhouette control or deformation need. If removing it does not change the final view or bend, question whether it belongs. This exercise creates a modelling record that links reference, volume, topology and movement. It also prevents surface detail from becoming a distraction from structural problems that will be more expensive to repair after UV work and rigging. Chapter 07 · Modelling Characters in Blender
- What exercise links UV decisions to the final material result?
- Choose one asset that contains broad surfaces, a bend and a visible hero area. Apply the intended object scale and place a checker on the material before painting. Inspect island orientation, relative size, stretching and seam visibility from the final camera as well as a technical close view. Move one seam or adjust one island group, unwrap again and capture a comparable checker image. Explain whether the change improved distortion, usable texture area or visibility. Next build the material from large responses: base colour, roughness, metallic behaviour where appropriate and normal detail. Test each input in isolation beneath a simple neutral light and confirm that image interpretation and normal direction behave as intended. Avoid adding noise until the broad surface reads correctly. Create a small lighting grid that includes frontal, grazing and final-scene illumination. If the material looks convincing only under the dramatic setup, identify which physical response remains weak. Return the asset to the intended shot and judge whether its detail survives camera distance, motion and compression. Remove or simplify work that cannot contribute. Package or collect the images, use meaningful names and reopen a copied project to verify that links remain reliable. Preserve the checker before and after, the neutral response test, the node section responsible for the change and the final frame. The resulting evidence should show a chain from coordinates through shader behaviour to cinematic readability, not simply a crowded node graph or a polished image with no explanation of how the surface was controlled. Chapter 08 · UV Editing, Materials and Shading
- How can I practise the full chain from armature to walk cycle?
- Use a simple prepared character and preserve an unrigged milestone. Check transforms, origin and mesh symmetry, then place the armature around meaningful joint centres rather than following only the visible surface. Establish hierarchy and consistent naming, and test controller behaviour before binding. Apply initial weights and pose each major joint through the range required by the intended shot. Inspect shoulders, elbows, hips and knees from several angles. Identify vertices that follow the wrong bone, fail to move or collapse the volume, adjust small groups and retest the same poses. If weighting cannot preserve the shape, reconsider supporting topology instead of painting increasingly complex compensation. Save a stable rig version. For the walk, block contact, down, passing and up poses at deliberate intervals. Set one step first, match root travel to the planted foot and play it at delivery speed. Inspect side, front and final-camera views for sliding, weight and silhouette. Only after the step works should it be mirrored or repeated into a loop. Review interpolation curves when automatic easing changes velocity or contact. Add secondary motion last and ensure it supports rather than hides the main mechanics. Capture the deformation symptom, relevant weight or topology change, corrected pose, key poses and a ground-contact comparison. Explain what each image proves. This exercise makes rigging, skinning and animation a dependency chain: stable transforms support hierarchy, hierarchy supports deformation, deformation supports poses and pose timing supports believable motion. Chapter 09 · Rigging, Skinning and Walk Cycles
- What end-to-end test should happen before a long render?
- Write the delivery dimensions, aspect ratio, frame rate, start and end frames, expected duration and output type before adjusting quality. Choose a short representative range containing motion, important materials, strong contrast and any transparency or depth effect. Confirm the active camera, focal relation, framing and movement across that range. Test lights one function at a time and check whether they reveal form, separate depth and guide attention without breaking the intended material response. Render ordered image files to the actual destination using settings intended for final work. Open the files independently, not only inside Blender, and inspect noise, clipping, missing textures, colour, alpha and naming. Assemble the sequence in the planned editor with a matching frame rate, add the required sound and export through the intended codec. Watch that encoded file from beginning to end on a normal playback path. Compare timing, colour and audio with the source frames. Record the render time for a stress frame and estimate the full job with space for retries, assembly and verification. If the budget is unsafe, reduce a setting only after identifying its visible contribution; compare before and after rather than applying a generic fast preset. Preserve one stress frame, the setting change, measured cost and resulting image. Finally, verify that the scene version, output folder, frame range and submission filename agree. This test proves the complete route from scene through camera, light, renderer, image sequence and video instead of discovering an incompatible assumption after the full render has consumed the remaining time. Chapter 10 · Cameras, Lighting and Render Pipelines
- What review can test whether the dossier and reflection are ready?
- Print or view the dossier as a reader would and label the claim made by every selected image. Each item should identify the stage, decision, relevant evidence and result without requiring a live explanation from the maker. Remove interface screenshots that merely prove software use, and replace them with comparisons that reveal a change in form, method or outcome. Check that annotations distinguish observation from interpretation: first state what visibly or audibly changed, then judge it against the project intention or technical criterion. Build at least one complete evidence chain from initial aim through problem, alternative, action, result and next practice. Confirm that failed tests are included only when they changed the method. Audit references for accuracy and explain what each source contributed rather than placing citations beside generic influence claims. Read the critical reflection separately. Highlight sentences that only describe activity and revise them to identify a criterion, evidence and consequence. Keep claims proportional to the test; a small audience check can reveal confusion but cannot prove a universal response. Connect film and games practice through a concrete transferable method such as iteration, attention, handoff, deformation testing or delivery verification. Then compare the dossier, reflection, render and editable project file for consistent terminology and version identity. Verify page order, legibility, captions and file names. Ask a peer to reconstruct one decision using only the submitted evidence and note where context is missing. The work is ready when the artefacts do more than display effort: they allow another reader to follow why a choice changed, how the outcome was judged and what the maker will do differently in future practice. Chapter 11 · Production Dossier and Critical Reflection
How to prepare for the assessments
Work through CCME0141 by maintaining a live decision record beside the artefacts. Before a film session, state the audience intention, list the essential shot, light and sound relations, and define the evidence needed to judge them. After a shoot or edit, save only the tests that explain a meaningful change and add a brief note while the reason is still clear.
During the Blender half, use a fixed diagnostic order: form, topology, UVs, materials, armature, weights, poses, lighting, camera and output. Test each stage under repeatable conditions before moving downstream. Reopen copied project files and exported media rather than trusting the working application.
Each week, write one reflective paragraph that identifies a choice, points to evidence, evaluates the result and states the next action. This creates usable material for the dossier and critical reflection without reconstructing the process at the deadline.
In the final submission period, freeze a stable version early enough to verify filenames, formats, packed assets, frame rate, duration, PDF readability, upload completion and consistency across the render, project file, dossier and written account.