PHAS0010 Chap.3 Work, Power and Energy
Work, Power and Energy
Work, Power and Energy turns forces acting along a path into scalar energy transfers. It covers the force-displacement integral, the work-energy theorem, kinetic and potential energy, conservative-force tests, frictional loss and instantaneous power. The chapter treats energy as a ledger: conservative interactions may be represented by potential energy, while friction and external agents enter as non-conservative work.
Careful system boundaries, signs and endpoint choices make the method shorter than a full force-time solution without hiding the physics.
What this chapter covers
- 01
Work as a dot product
- 02
Work along a path
- 03
Kinetic energy and net work
- 04
Conservative forces and potential energy
- 05
Friction and mechanical-energy change
- 06
Average and instantaneous power
Worked example · free
Convert net work into final speed
- 1Calculate applied work as 18.0 times 6.00 times cos 35.0 degrees = 88.47 joules.
- 1Calculate friction work as minus 12.0 times 6.00 = minus 72.00 joules.
- 1Add all work contributions to obtain net work of 16.47 joules.
- 1Set net work equal to one half m v squared and obtain v = 2.870 metres per second.
Key terms
- Mechanical work
- Energy transferred by a force through displacement, calculated as a force-displacement dot product.
- Kinetic energy
- The scalar energy one half m v squared associated with translational motion.
- Conservative force
- A force whose work between two endpoints is independent of the path.
- Potential energy
- Stored interaction energy defined for a conservative force relative to a chosen zero.
- Instantaneous power
- The rate of energy transfer at an instant, equal to force dotted with velocity.
Work, Power and Energy FAQ
When does a force do zero work?
A force does zero work when its component along the displacement is zero or when displacement itself is zero. This does not mean the force is absent or physically unimportant. A normal force can constrain a path while remaining perpendicular to the motion and therefore transferring no energy.
When is mechanical energy conserved?
The sum of kinetic and potential energy remains constant when the chosen system is isolated from non-conservative transfers and its relevant interactions are represented by potential energies. If friction or an external agent does work, include that transfer explicitly instead of silently applying a conservation equation.
What is the difference between work and power?
Work measures an amount of energy transferred, while power measures how quickly that transfer occurs. The same work completed in less time requires greater average power. Instantaneously, power is force dotted with velocity, so angle and speed can change power even while force magnitude remains constant.
Exam move
Build an energy ledger before inserting numbers. Write the initial and final kinetic and potential energies in separate columns, then add a row for each non-conservative transfer. For direct work calculations, draw the displacement direction and resolve only the force component parallel to it. Practise both routes on selected problems: solve once with net work and once with mechanical-energy change, then reconcile the signs.
Sketch a potential-energy curve and use its slope to predict force direction before differentiating. Test answers with qualitative limits: negative net work should not raise kinetic energy, doubling spring compression should quadruple stored energy, and a perpendicular force should contribute zero instantaneous power. Keep full precision until the final line and attach joules or watts explicitly.
When an answer disagrees with intuition, inspect the system boundary, force angle and potential-energy zero before changing algebra. Repeating that audit makes energy methods reliable rather than merely fast. Train system selection deliberately rather than treating it as an invisible preliminary.
Solve one gravitational problem with the object alone, where gravity performs external work, and again with the object-Earth system, where gravitational potential energy changes. Reconcile the identical final speed so the accounting convention becomes clear. Repeat that comparison for a block and spring.
For variable forces, sketch force against displacement and interpret signed area before integrating; rectangular, triangular and linear segments provide quick checks on an antiderivative. Build potential-energy sketches from formulas by marking stationary points, curvature, total-energy lines and allowed regions. Distinguish a turning point, where speed vanishes, from an equilibrium, where force vanishes.
Add a small displacement on either side of each equilibrium to decide whether the force restores or amplifies it. Power practice should alternate average values with instantaneous dot products. Change the angle between force and velocity while holding their magnitudes fixed, then explain why the transfer rate changes even though neither magnitude does.
When friction appears, avoid inventing a friction potential; place its work in the non-conservative column and compare the lost mechanical energy with thermal transfer. Track sign changes explicitly whenever the displacement reverses its direction.
Finish mixed problems with two independent checks: calculate net work from individual forces and compare it with the change in kinetic energy, then confirm that all terms share joule units. A final verbal statement should name where energy entered, where it was stored and where any mechanical energy left the chosen system.
Working through Work, Power and Energy in PHAS0010? Sia is AskSia’s AI Physics tutor — ask any PHAS0010 Work, Power and Energy question and get a clear, step-by-step explanation grounded in how PHAS0010 is taught and assessed. Read this chapter free, then take your hardest questions to Sia.