CHEM1042 Chap.6 Heat, Work and the First Law
Heat, Work and the First Law
Choose the system before assigning signs
Heat and work are transfers across a boundary, while internal energy is a state property of the system. Under the chemistry convention, heat entering the system is positive and work done on the system is positive.
Energy leaving as heat or expansion work carries a negative sign for the system.
The first law balances both transfers
The internal-energy change equals heat plus work. A process can absorb heat and still lose internal energy if it performs more work than the heat received. Conversely, a system can release heat and still gain internal energy if sufficiently large compression work is done on it.
The signs and magnitudes must therefore be evaluated independently.
State functions ignore the route
Internal energy depends only on initial and final states. Heat and work depend on the path. Two routes connecting the same states can have different work, but their heat values must differ so the sum remains the same.
This distinction is the foundation for later Hess-law reasoning.
Pressure-volume work needs unit control
At constant external pressure, expansion work is negative external pressure times volume change. Expansion gives positive volume change and negative work; compression reverses both. Pressure-volume units must be converted into energy units before work is combined with heat.
What this chapter covers
- 01
System and surroundings
- 02
Heat-flow sign convention
- 03
Work sign convention
- 04
Internal-energy balance
- 05
State and path functions
- 06
Pressure-volume work
Worked example · free
Balance heat against expansion work
- 3Assign signs from the system perspective.
- 3Apply the first-law balance.
- 2Interpret the net flow.
Key terms
- System
- The matter or region selected for thermodynamic analysis.
- Surroundings
- Everything outside the selected system that can exchange energy with it.
- Heat
- Energy transferred because of a temperature difference.
- Work
- Energy transferred through an organised force acting through a displacement or related coordinate.
- Internal Energy
- A state function representing the total microscopic energy of the system.
- Path Function
- A quantity whose value depends on how a process moves between states.
Heat, Work and the First Law FAQ
Why is expansion work negative in the chemistry convention?
During expansion, the system pushes the surroundings and transfers energy outward. Work is therefore done by the system rather than on it, so the system work term is negative. Compression transfers energy inward and gives positive work under the same convention.
Can an endothermic process have a negative internal-energy change?
Yes. Endothermic means heat enters and q is positive. If the system performs an even larger amount of work on the surroundings, the negative work term can outweigh the heat input and make the internal-energy change negative. Both transfers are needed for the verdict.
Why can heat and work differ between two routes?
They are path functions. Different pressure histories or process constraints can partition the same state-function change differently between heat and work. Because initial and final states fix internal-energy change, any work difference must be matched by an opposite heat difference.
Exam move
For every problem, draw a box around the system and add arrows for heat and work. Translate each arrow into a sign before substituting values. Keep q, w and ΔU on separate lines, reconcile joules and kilojoules, and write one sentence naming the dominant transfer. Practise matched pairs: expansion versus compression, heating versus cooling, and two paths with common endpoints.
For pressure-volume work, calculate volume change explicitly and check whether the final sign agrees with the direction of energy transfer. Avoid treating temperature as a direct synonym for internal energy unless a heat-capacity relation is provided. Practise the first law with a boundary sketch beside every calculation.
Label the system, draw heat and work arrows, assign signs from the arrows and convert both transfers into one energy unit before addition. Include an expansion, a compression and two different paths between the same endpoint states. For the path pair, require the heat values to reconcile with the different work values while preserving the same internal-energy change.
After each result, write a one-sentence energy narrative naming the dominant transfer. If that sentence conflicts with the calculated sign, correct the boundary reasoning before touching the arithmetic. This routine makes sign conventions physical rather than mnemonic.
Working through Heat, Work and the First Law in CHEM1042? Sia is AskSia’s AI Chemistry tutor — ask any CHEM1042 Heat, Work and the First Law question and get a clear, step-by-step explanation grounded in how CHEM1042 is taught and assessed. Read this chapter free, then take your hardest questions to Sia.