ELEC6103 Satellite Communications
ELEC6103 Overview
- The University of Hong Kong
- First Semester, 2026-27
- Postgraduate course
- Electrical Engineering
- Closed-book examination and two assignments
What this course covers
Satellite Communications is a postgraduate course taught by the University of Hong Kong's electrical and electronic engineering department. Its stated objective is a general understanding and overview of satellite communications, with emphasis on recent applications, trends and developments.
- Assessed by A closed-book examination worth sixty per cent and two take-home assignments worth forty per cent together, followed by a one-to-one interview on the assignments.
- The skill being tested Carrying a link calculation through every gain and loss in decibels, and explaining a design choice with the physical reason behind it.
- Hardest step Combining uplink and downlink carrier-to-noise ratios correctly and accounting for both the absorption and the extra sky noise that rain brings.
What you get in the full ELEC6103 Exam Bible
- 11 chapters, 61 pages — every examinable topic
- 30 original practice questions, each with a model answer in the Examination format
- 11 worked examples, solved the way ELEC6103 marks
- 18 computed figures, redrawn from the course’s own numbers
- Exam-morning plan for the Examination (60%) — what to revise last, where marks are lost
Free on this page: assessment table, chapter map, one worked example, key terms, FAQ. The rest is in the full exam bible.
How ELEC6103 is assessed
| Component | Weight | Format |
|---|---|---|
| Examination | 60% | Closed book; date, length and sections are not stated in the course information |
| Assignments | 40% | Two take-home exercises, due 26 October and 16 November 2026, with a one-to-one interview on the submitted work |
The course states the assessment identically in the first-session slides and on the course page: sixty per cent examination, closed book, and forty per cent assignment made up of two take-home exercises, totalling 100%. The split of the forty per cent between the two assignments is not published, and neither is the examination date, length or section structure. A mandatory one-to-one interview on the submitted assignments is held before the end of the course; it carries no separate weight and needs no preparation. Students must attend that interview, but a numeric attendance threshold is not stated and no consequence for whether you pass is published. No hurdle requirement, pass mark or late-penalty rate is stated, so confirm these on the course Moodle page.
Assessment structure
Segment widths reproduce the published percentage weights and total 100%.
What other students are asking about ELEC6103
- Where can I find lecture notes or study guides for ELEC6103 at HKU?
- The ELEC6103 study guide in AskSia Library covers Satellite Communications in 11 chapters, with the assessment table, a chapter-by-chapter topic map, key terms and a worked example, free to read on this page.
- Is there a final exam in ELEC6103, and how much is it worth?
- Yes. In the offering this AskSia Library guide is built from, Examination carries 60% of the ELEC6103 mark; the full split is Examination 60%, Assignments 40%.
- What does ELEC6103 cover on frequency rights, itu filing and band selection?
- In AskSia Library's ELEC6103 guide, the Frequency Rights, ITU Filing and Band Selection chapter explains national and international control · the ITU register · first come, first served within 2 degrees · seven-year bring-into-use · C, Ku and Ka bands.
- What does ELEC6103 cover on kepler's laws and orbital elements?
- In AskSia Library's ELEC6103 guide, the Kepler's Laws and Orbital Elements chapter explains gravity against centrifugal force · Kepler's three laws · eccentricity · six orbital elements · period of circular and elliptical orbits.
- What does ELEC6103 cover on look angles, launchers and geostationary placement?
- In AskSia Library's ELEC6103 guide, the Look Angles, Launchers and Geostationary Placement chapter explains central angle, elevation and azimuth · the quadrant rule · transfer orbits and kick motors · equatorial launch · Doppler and eclipse.
Current ELEC6103 dates
| Date | Item | Control |
|---|---|---|
| 26 October 2026 | Assignment 1 due | Due 23:59; opened 13 October 2026 on the course submission page. |
| 16 November 2026 | Assignment 2 due | Due 23:59; opened 2 November 2026 on the course submission page. |
| 17 to 20 November 2026 | One-to-one interview on the assignments | Mandatory, no preparation required; dates given as approximate in the lecture notes. |
| 20 November 2026 | Last lecture | Stated in the lecture notes for the final link design lecture. |
| 7 to 23 December 2026 | University assessment period | The examination date for this course is not stated; confirm it on your timetable. |
Dates are as published in the course submission pages, the lecture notes for this offering and the University's published dates of semesters. Confirm exact deadlines and submission settings in the live LMS.
What ELEC6103 covers
Eleven chapters follow the published lecture sequence from satellite systems and spectrum rights through orbits, launch and subsystems to link budgets, noise, rain, digital modulation and multiple access.
Satellite Systems, History and Industry Trends
fibre against satellite · LEO, MEO and GEO · coverage from one geostationary satellite · history from 1945 · price per megabitWhy build a satellite when fibre exists
The opening lecture sets up an uncomfortable comparison.
- Fibre against satellite against cellular on capacity, cost and mobility
- Markets satellites keep: remote land, sea, air, emergency and broadcasting
- What qualifies as a satellite and why balloons do not
- LEO, MEO and GEO heights, periods, latency and fleet sizes
- Field of view versus footprint for a geostationary spacecraft
- The tangent triangle that gives the 81.3 degree coverage limit
Frequency Rights, ITU Filing and Band Selection
national and international control · the ITU register · first come, first served within 2 degrees · seven-year bring-into-use · C, Ku and Ka bandsSpectrum comes before hardware
A spacecraft with no coordinated frequencies and no orbital position has no legal right to radiate, so this chapter treats spectrum as the first design constraint. Authority is layered.
- National regulators, the ITU and trade controls as three layers
- The Master International Frequency Register and the three ITU duties
- Advance publication, coordination and notification in order
- First-filer priority and the two degree coordination rule
- Seven-year bring-into-use deadline, leasing and the 90 day temporary satellite
- Planned versus unplanned C band and equitable access
Kepler's Laws and Orbital Elements
gravity against centrifugal force · Kepler's three laws · eccentricity · six orbital elements · period of circular and elliptical orbitsBalance, not fuel, keeps a satellite up
An orbiting spacecraft is permanently falling. Gravity draws it towards the Earth while its sideways speed carries it past, and when those effects match it keeps circling without propulsion.
- Gravity against outward force and the orbital speed formula
- Period of a circular orbit from radius and Kepler's constant
- First law: an ellipse with the Earth centre at one focus
- Second law: equal areas and fastest motion at perigee
- Third law: period squared against semimajor axis cubed
- Eccentricity from apogee and perigee radii
Look Angles, Launchers and Geostationary Placement
central angle, elevation and azimuth · the quadrant rule · transfer orbits and kick motors · equatorial launch · Doppler and eclipseTwo angles to aim a dish
Pointing an earth station needs an elevation, measured up from the local horizon, and an azimuth, measured clockwise from true north.
- Elevation and azimuth as the two pointing angles
- The three inputs a geostationary look-angle problem needs
- Central angle and the 81.3 degree visibility check
- Elevation and slant range formulas built on 6.6107345
- The intermediate angle and four azimuth quadrant rules
- London and Hong Kong look angles as reference cases
Platform Subsystems: Attitude, Power and Thermal
attitude and orbit control · station-keeping box · chemical and electric propulsion · telemetry and command · solar arrays, batteries and thermal controlThe bus exists to serve the payload
A communications satellite divides into the payload, which handles customer traffic, and the platform or bus, which keeps that payload working.
- Platform versus payload and the four bus subsystems
- Orbit perturbations and the station-keeping box
- Spinners, three-axis stabilisation and momentum wheels
- Chemical against electric propulsion for orbit raising
- Telemetry frames, command receivers and recovery antennas
- Solar flux, cell efficiency and end-of-life array sizing
Communications Payload, Transponders and Antennas
bent-pipe and on-board processing transponders · the C band frequency plan · four antenna types · gain and beamwidth · frequency reuseWhy the payload sets capacity
Everything a satellite earns passes through its payload: the antennas that collect and radiate microwave signals, and the transponders between them.
- Payload role and what a transponder does
- C band frequency plan and the 2,225 MHz translation
- Polarisation offset and why the frequency must change
- Bent-pipe and on-board processing transponders compared
- Wire, horn, reflector and phased array antennas
- Gain, beamwidth and the 33,000 over theta squared estimate
Decibels, Link Budgets and Transmission Theory
decibels, dBW and dBm · EIRP and flux density · free-space path loss · the link equation · an eight-step budget procedureWhat a link budget is for
A link budget forecasts whether a satellite link will work by tallying every gain and loss between the transmitting modem and the receiving one, one direction at a time.
- Purpose, inputs and outputs of a satellite link budget
- Decibel arithmetic and the dBW, dBm and dBi units
- EIRP as the transmitter figure of merit
- Flux density and received power from effective aperture
- Free-space path loss and its frequency dependence
- The received-power equation with atmospheric and antenna losses
System Noise, G/T and Carrier-to-Noise Ratio
thermal noise kTB · system noise temperature · G/T · C/N from received power · combining uplink and downlinkReceived power needs a noise reference
Knowing that a carrier arrives at around minus 116 dBW says nothing about link quality until the noise accompanying it is known.
- Thermal noise, kTB and Boltzmann's constant in decibels
- Carrier-to-noise ratio as received power minus noise power
- How bandwidth trades against C/N
- System noise temperature of a cascaded receiver chain
- G/T as the figure of merit for a receiving station
- Combining uplink and downlink C/N with reciprocals
Rain Fade, Uplink and Downlink Design
rain absorption and sky noise · margins and beam contours · uplink power · transponder gain · a full direct-broadcast designOne broadcast system, designed from both ends
This chapter ties the earlier link budget chapters together through a single design: a direct-broadcast television satellite in geostationary orbit, small home dishes on the ground and one professional uplink station feeding it.
- Absorption and sky noise as the two penalties of rain
- Margin over the receiver threshold in clear air and in rain
- Five recurring errors in finished link budgets
- Effect of the 3 dB and 2 dB beam contours
- Solving an uplink budget for transmit power
- Splitting transponder gain under the 60 dB stage rule
Digital Transmission, Eb/No, Modulation and DVB-S2
Eb/No against C/N · BPSK to 16-APSK · symbol rate, FEC and roll-off · DVB-S against DVB-S2 · back-off and adaptive codingWhy satellite links went digital
The lecture gives four motives for abandoning analogue transmission: digital signals tolerate noise better, use bandwidth more efficiently, allow errors to be corrected and adapt easily to different services.
- Four reasons satellite systems moved from analogue to digital
- Eb/No as the figure of merit for a digital link
- Converting Eb/No to C/N through spectral efficiency
- Bits per symbol for BPSK, QPSK, 8-PSK and 16-APSK
- Neighbour distance on a PSK constellation and Gray coding
- Symbol rate, roll-off and occupied bandwidth in sequence
Multiple Access, Small Satellites and NGSO Systems
FDMA and TDMA capacity · a low-orbit handheld system · cost per circuit-minute · new space and constellationsSharing one transponder among many stations
A satellite earns its keep by serving many users at once. The simplest layer of sharing is already built into the payload, since separate transponders sit on separate frequencies.
- Three named methods of sharing a transponder
- FDMA carriers, bandpass filters and fixed assignment
- Guard bands and the FDMA station count
- TDMA frames, preambles and guard times
- Why FDMA wins for low-rate stations in the tutorial
- A 50-satellite LEO handheld system and its link budgets
The published topics run from the basics of a satellite system, meaning design considerations, frequency, orbits, launch and subsystems, through modulation and multiple access, to satellite link design, and finally to applications such as small satellites, high-throughput satellites and low earth orbit constellations.
The prerequisites are listed as school-level physics, mathematics and geography, so the course assumes no earlier radio or space engineering.
Two kinds of question run through it
Half of the material is explanatory. Why do satellites survive against optical fibre? Why does a filing with the International Telecommunication Union lapse after seven years?
Why do higher frequency bands give more bandwidth but suffer more from rain? Why does a geostationary satellite need a station-keeping box? These questions reward a short, structured answer that names the mechanism and attaches one number to it.
The other half is arithmetic in decibels: orbital period from Kepler's third law, elevation and azimuth from the look-angle formulas, antenna gain from aperture size, received power from EIRP and path loss, noise power from kTB, carrier-to-noise ratio, rain margin, symbol rate and bandwidth.
These questions reward a layout in which every quantity carries its unit and every gain and loss sits in one column.
How the guide is arranged
The eleven chapters follow the order of the lectures. Chapter 1 sets out why satellites still matter and how orbits differ. Chapter 2 covers spectrum rights and band choice.
Chapters 3 and 4 split the orbital mechanics lecture into the laws of motion and the practical questions of pointing and launch. Chapters 5 and 6 split the subsystems lecture into the platform and the payload. Chapters 7 to 10 follow the three link design lectures: decibels and the link equation, then noise and carrier-to-noise ratio, then rain and full system design, then digital modulation and coding.
Chapter 11 closes with multiple access and the economics of low-orbit constellations.
What the course provides as practice
The course supplies tutorial questions with full answers at the end of each topic, and a short quiz at the end of each class that is used for discussion rather than assessment.
Those tutorial answers are the clearest guide to the layout a marker expects, and this guide follows their conventions: one decimal place in decibels, Boltzmann's constant as minus 228.6 dBW per kelvin per hertz, and the free-space path loss written as twenty times the logarithm of four pi times range over wavelength.
Where a printed tutorial line contains a slip, the relevant chapter points it out and shows the corrected value, so you can trust the method without inheriting the typo.
How this course is assessed
The published assessment is sixty per cent examination, closed book, and forty per cent assignment, made up of two take-home exercises.
The first assignment opened on 13 October and was due on 26 October 2026; the second opened on 2 November and is due on 16 November 2026 at 23:59. A mandatory one-to-one interview on the submitted assignments, described as needing no preparation, takes place before the end of the course, around 17 to 20 November.
The official course information for this offering does not state the examination date, its length or its section structure, and it does not split the forty per cent between the two assignments.
The University's first-semester assessment period runs from 7 to 23 December 2026. Teaching explanations, worked examples and practice items in this guide are independently authored and are not University assessment material; any marks shown on them are an AskSia study allocation.
Outside the weighted marks, you must attend that one-to-one interview; a numeric attendance threshold is not stated for it, and whether missing it affects whether you pass is not published, so check the course Moodle page. Confirm the examination timetable and any change to the assessment on the course Moodle page.
Worked example · free
Received power on a C band downlink
- 2Convert the transmit power and form the EIRP.
- 2Compute the wavelength and the free-space path loss.
- 2Compute the receive gain from the dish size and efficiency.
- 2Add gains, subtract the loss and convert back to watts.
Key terms
- Geostationary Orbit
- A circular orbit in the equatorial plane at 35,786 km altitude whose period equals one sidereal day, so the satellite appears fixed in the sky and a ground antenna needs no tracking.
- Footprint
- The area on the Earth where a satellite's signals can actually be received, set by its antenna beams and power; it always lies inside the larger field of view.
- Bring Into Use
- The ITU requirement that a filed satellite network actually operate from its slot within seven years of filing, or the filing and its priority are lost.
- Eccentricity
- The measure of how far an orbit departs from a circle, computed from the apogee and perigee radii; zero for a circle and approaching one for a highly elliptical orbit.
- Look Angles
- The elevation above the horizon and the azimuth clockwise from true north that an earth station uses to point its antenna at a satellite.
- Station-Keeping Box
- The small window of plus or minus 0.05 degrees, about 65 km square, within which a geostationary satellite is held by periodic manoeuvres.
- Transponder
- A receiver and transmitter chain on the satellite that amplifies an uplink signal, shifts it to the downlink frequency and sends it back down.
- EIRP
- Effective isotropic radiated power: transmit power multiplied by antenna gain, the figure of merit for a transmitter, usually quoted in dBW over a coverage area.
- Path Loss
- The spreading loss over the link, 20 log of four pi times range divided by wavelength; near 200 dB for most geostationary links and not an absorption loss.
- System Noise Temperature
- The single temperature that represents all the noise of a receiving chain referred to its input, built from the antenna, the low noise amplifier and later stages divided by the gain ahead of them.
- G/T
- The receive figure of merit: antenna gain divided by system noise temperature, in dB/K; a higher value raises the carrier-to-noise ratio for the same incoming signal.
- Carrier-to-Noise Ratio
- Received carrier power divided by noise power in the receiver bandwidth; uplink and downlink values combine through their reciprocals as linear ratios.
- Roll-off Factor
- The excess bandwidth a modulator's filter needs beyond the symbol rate; occupied bandwidth equals symbol rate times one plus the roll-off.
- Multiple Access
- The sharing of one satellite's capacity among many earth stations, by frequency, time or code division.
ELEC6103 FAQ
Is the examination open book?
No. The course states the examination is closed book and worth sixty per cent of the final result. Formulas, constants such as Boltzmann's constant in decibels and the geostationary radius must therefore come from memory, which is why the exam-morning section of this guide suggests writing a short formula card in the first minute of the paper.
When is the examination and how long is it?
The official course information for this offering does not state the date, the length or the section structure of the paper. The University's first-semester assessment period runs from 7 to 23 December 2026, so expect the paper in that window and confirm the day, room and duration on your own examination timetable and the course Moodle page.
How are the two assignments weighted?
Together they carry forty per cent and are described as two take-home exercises. The split between them is not published. The first was due on 26 October 2026 and the second is due on 16 November 2026 at 23:59. A mandatory one-to-one interview on the submitted work follows around 17 to 20 November and needs no preparation.
Do I need a strong physics background?
The listed prerequisites are school-level physics, mathematics and geography. The mathematics in the course is logarithms, square roots, trigonometry in one triangle and the geometry of an ellipse. What takes practice is moving confidently between a ratio and its value in decibels, and keeping units such as dBW, dBi, dBK and dBHz attached to every line.
Which topics carry the most calculation?
The link design lectures do. Expect to compute EIRP, free-space path loss, received power, noise power, carrier-to-noise ratio, overall C/N from uplink and downlink, rain penalties, symbol rate and occupied bandwidth. Orbital mechanics adds period, velocity, eccentricity and look angles. The explanatory topics, spectrum rights and subsystems, need comparisons supported by one or two figures.
Are the reference documents on the course page examined?
Two documents are explicitly marked reference only and will not be examined: a satellite mission profile and a launch vehicle user's guide. They help with context on launch and transfer orbits, but revision time is better spent on the lecture notes and the tutorial answers, which carry the methods the examination draws on.
Is there any pass condition outside the weighted assessment?
One. You must attend a one-to-one interview on your submitted assignments before the course ends, around 17 to 20 November. A numeric attendance threshold is not stated, the interview carries no separate weight, and the course does not say whether missing it affects whether you pass, so check the course Moodle page. No hurdle or pass mark is published for the examination or the assignments.
Where are past examination papers?
The course page has a section for past examination papers with solutions, and it reads not available for this offering. This guide therefore models its practice on the shapes of the course tutorials, short explanations and multi-step link calculations, and every practice question in it uses original numbers.
Questions students ask in each ELEC6103 chapter
- Why do three geostationary satellites give global coverage?
- From 35,786 km a spacecraft sees a cap whose half angle at the Earth centre is about 81.3 degrees, found from the ratio of Earth radius to orbit radius. Two caps of roughly 162 degrees each cannot close a 360 degree circle, but three can, with overlap. Polar regions above the visible edge remain uncovered, and real services need extra margin for low elevation angles. Chapter 01 · Satellite Systems, History and Industry Trends
- Why did the US regulator hand the 3.7 to 4.0 GHz range to 5G?
- Two needs pull in opposite directions. A mobile network must stay available, which favours low frequencies where rain fade is small, while capacity needs wide channels, which only exist higher up. C band lies in the middle, above L band yet below Ku and Ka, giving tolerable rain loss and enough bandwidth together. Satellite users were then repacked into 4.0 to 4.2 GHz and compensated with relocation payments. Chapter 02 · Frequency Rights, ITU Filing and Band Selection
- Where does a satellite on an elliptical orbit travel fastest?
- At perigee, the point nearest the Earth. The second law requires the line from the Earth centre to sweep equal areas in equal intervals, and close in that line is short, so the spacecraft must cover more arc each second. Out at apogee the radius is long, so the motion slows. No velocity formula is needed to answer the qualitative version; a sentence citing the law earns the mark. Chapter 03 · Kepler's Laws and Orbital Elements
- What three inputs does a geostationary look-angle problem need?
- The satellite's longitude, plus the station's latitude and longitude. A geostationary spacecraft has zero latitude by definition, and its radius is fixed at 42,164.17 km, so nothing else about the orbit has to be supplied. From these the central angle, elevation, slant range and azimuth all follow, which is why tutorial questions often ask you to name the inputs before computing anything. Chapter 04 · Look Angles, Launchers and Geostationary Placement
- Why do geostationary satellites need regular manoeuvres at all?
- Gravitational pull from the Sun and Moon, plus the Earth's slightly irregular shape, keeps pushing the orbit away from its ideal position. Inclination alone grows by under one degree each year, enough to take the satellite out of the beam of fixed ground dishes. Thrusters fired every few weeks bring it back, and the propellant spent on these corrections is often what ends a satellite's working life. Chapter 05 · Platform Subsystems: Attitude, Power and Thermal
- Why must a transponder change the frequency before retransmitting?
- The output leaving the satellite is many orders of magnitude stronger than the faint carrier arriving from the ground. If both used the same frequency, the transmitted power would leak into the receive chain and overwhelm it. Shifting C band traffic down by 2,225 MHz keeps transmit and receive bands well separated, so filters can isolate the sensitive low noise amplifier from the high power stage. Chapter 06 · Communications Payload, Transponders and Antennas
- Why does path loss rise with frequency if free space absorbs nothing?
- The loss term is written relative to an isotropic receiver whose capture area shrinks as wavelength gets shorter, so the formula grows by 20 dB for each tenfold increase in frequency. It describes spreading, not absorption. When the receive dish keeps the same physical area, its gain rises by exactly the same amount, and the delivered power stays unchanged; only the bookkeeping moves between rows. Chapter 07 · Decibels, Link Budgets and Transmission Theory
- Why does a narrow carrier close a link that a wide one cannot?
- Thermal noise grows in direct proportion to the bandwidth the receiver admits, while the carrier power stays the same. Cutting bandwidth from 36 MHz to 20 kHz removes over 32 dB of noise, which is how the low-orbit tutorial link survives even though its carrier arrives over 50 dB weaker than in the geostationary examples. Each halving of bandwidth recovers about 3 dB. Chapter 08 · System Noise, G/T and Carrier-to-Noise Ratio
- Why does rain reduce C/N by more than the rain attenuation figure?
- Absorbing material also radiates thermal energy. When a storm sits in the beam, the dish no longer looks at cold sky but at a warm, lossy layer, so the receiving system temperature increases. That adds a second penalty on the noise side, computed as 10 log of the temperature ratio, on top of the carrier loss. In the tutorial design that second term, 2.8 dB, is bigger than the 2 dB attenuation itself. Chapter 09 · Rain Fade, Uplink and Downlink Design
- When is the required C/N lower than the required Eb/No?
- The two ratios differ by 10 log of the bit rate over the noise bandwidth. When a scheme carries fewer than one information bit per hertz, that log term is negative, so the C/N target comes out below the energy-per-bit target. Efficient MODCODs above one bit per hertz reverse the order, pushing the required C/N above the Eb/No threshold. Chapter 10 · Digital Transmission, Eb/No, Modulation and DVB-S2
- Why does TDMA serve so few slow stations in the tutorial?
- Each burst carries the same 148-bit preamble plus a pair of guard times regardless of payload. A station sending 80 kbps contributes only ten data bits per 125 microsecond frame, so roughly 97 per cent of its slot is overhead. FDMA has a fixed guard band too, but at 150 kHz per channel that cost is far smaller in proportion, giving 360 stations against 32 on the same 54 MHz transponder. Chapter 11 · Multiple Access, Small Satellites and NGSO Systems
How to study for the exam
Work in three passes. In the first, read Chapters 1, 2, 5 and 6 for their comparisons and write each one as a two-column list: fibre against satellite, C against Ka band, chemical against electric propulsion, bent pipe against on-board processing. In the second, take Chapters 3, 4 and 7 to 10 one worked example at a time, cover the answer, and reproduce every line with its unit before checking.
Keep a running page of constants and formulas as you go, because that page becomes your exam-morning card. In the third pass, do the mixed practice set without notes and under time, then mark it line by line against the models, counting only steps you actually wrote. Return to the tutorial answers for any topic where a line went wrong, since their layout is the one the course itself uses.
Your AI Electrical Engineering tutor for ELEC6103
Stuck on a hard ELEC6103 question? Sia is AskSia’s AI Electrical Engineering tutor — ask any ELEC6103 Satellite Communications question and get a clear, step-by-step explanation grounded in how the course is actually taught and assessed. Read this whole study guide free, then take your hardest questions to Sia.