ELEC6103 Chap.3 Kepler's Laws and Orbital Elements
Kepler's Laws and Orbital Elements
Balance, not fuel, keeps a satellite up
An orbiting spacecraft is permanently falling. Gravity draws it towards the Earth while its sideways speed carries it past, and when those effects match it keeps circling without propulsion.
Equating the inward gravitational force, μm/r2, with the outward term mv2/r removes the mass and leaves v = (μ/r)1/2, where Kepler's constant μ is 398,600.4418 cubic kilometres per second squared. One circumference over that speed yields the period, T = 2πr3/2/μ1/2.
Every radius here is measured from the Earth centre, so add 6,378.137 km to any altitude first.
Kepler's three laws in working form
The first law says the path is an ellipse with the Earth centre at one focus; perigee and apogee lie at opposite ends of the long axis. The second says the radius line sweeps equal areas in equal times, so the satellite is fastest at perigee and slowest at apogee.
The third makes the period squared grow in step with the semimajor axis cubed, which means orbits of the same size share a period however stretched they are. Kepler drew these from Tycho Brahe's planetary data and Newton later derived them from gravitation.
Eccentricity and the semimajor axis
For an ellipse, take the apogee and perigee radii from the Earth centre.
Their average is the semimajor axis, and eccentricity is their difference divided by their sum. A circle has e = 0; the lecture's Molniya-style orbit, 500 km by 39,152 km, has e near 0.74 and a period close to 11.7 hours.
Six numbers that pin down any orbit
Solving the equation of motion leaves six constants. Semimajor axis and eccentricity give size and shape.
Inclination, right ascension of the ascending node and argument of perigee orient the plane and the ellipse in space. Time of perigee fixes the satellite's position at a chosen instant.
Launch orbits are often quoted more compactly as perigee by apogee by inclination.
Geostationary, geosynchronous and the transfer ellipse
Geostationary flight needs zero inclination, zero eccentricity and the height, 35,786.03 km, where the period is one sidereal day. A geosynchronous orbit matches that period but breaks a condition.
The transfer ellipse joins the release height to geostationary height and is analysed with the same semimajor-axis method. Perturbations from the Sun and Moon, radiation pressure, drag and Earth oblateness make real orbits drift.
What this chapter covers
- 01
Gravity against outward force and the orbital speed formula
- 02
Period of a circular orbit from radius and Kepler's constant
- 03
First law: an ellipse with the Earth centre at one focus
- 04
Second law: equal areas and fastest motion at perigee
- 05
Third law: period squared against semimajor axis cubed
- 06
Eccentricity from apogee and perigee radii
- 07
The six orbital elements grouped by size, orientation and timing
- 08
Geostationary versus geosynchronous and the transfer orbit
- 09
Perturbing forces that make real orbits drift
Worked example · free
Eccentricity and period of a 1,000 km by 20,000 km orbit
- 2Convert heights to radii from the Earth centre: Ra = 20,000 + 6,378.137 = 26,378.137 km and Rp = 1,000 + 6,378.137 = 7,378.137 km.
- 2Semimajor axis: a = (26,378.137 + 7,378.137) / 2 = 16,878.137 km.
- 2Eccentricity: e = (26,378.137 - 7,378.137) / (26,378.137 + 7,378.137) = 19,000 / 33,756.274 = 0.5629.
- 2Period: T2 = 4 pi2 a3 / mu = 4.762 x 108 s2, so T = 21,822.2 s = 6.062 h.
Key terms
- Semimajor Axis
- Half the longest diameter of an elliptical orbit, equal to the mean of the apogee and perigee radii from the Earth centre; by the third law it alone sets the period.
- Eccentricity
- The orbital element describing shape, computed as apogee radius minus perigee radius over their sum; zero for a circle and approaching one for a very stretched ellipse.
- Argument of Perigee
- The angle measured along the path, starting at the ascending node and ending at perigee, fixing how the ellipse is turned within its own plane.
- Kepler's Constant
- The gravitational parameter mu, 3.986004418 x 105 km3/s2, used with radii from the Earth centre in every velocity and period formula in this chapter.
Kepler's Laws and Orbital Elements FAQ
Where does a satellite on an elliptical orbit travel fastest?
At perigee, the point nearest the Earth. The second law requires the line from the Earth centre to sweep equal areas in equal intervals, and close in that line is short, so the spacecraft must cover more arc each second. Out at apogee the radius is long, so the motion slows. No velocity formula is needed to answer the qualitative version; a sentence citing the law earns the mark.
Do two orbits with different eccentricities have different periods?
Only if their semimajor axes differ. The third law links period to the semimajor axis alone, so a circle and a strongly elongated ellipse of equal size take exactly the same time per revolution. This is why every elliptical problem starts by averaging the apogee and perigee radii, measured from the Earth centre, before the period formula is applied.
How is a geosynchronous orbit different from a geostationary one?
Both complete one revolution per sidereal day, 23 hours 56 minutes 4.1 seconds. The geostationary case additionally requires zero inclination, zero eccentricity and exactly the right height, so it appears motionless from the ground. A geosynchronous spacecraft can be slightly tilted, slightly elliptical or slightly off height, and then wanders in a small pattern that a ground antenna may have to follow.
Which orbital elements matter for a geostationary satellite?
Very few. With eccentricity and inclination both zero, the ellipse has no perigee to locate and the plane has no tilt to orient, so argument of perigee and the ascending node lose their meaning. What remains is the radius, 42,164.17 km, and where along the equator the spacecraft sits, which the later look-angle method treats as the satellite longitude.
Why do real orbits drift away from the ideal?
The textbook model assumes a perfect sphere and nothing but Earth gravity. In practice the Sun and Moon pull on the spacecraft, sunlight exerts radiation pressure, residual atmosphere causes drag and the Earth's bulge distorts its field. Lunar and solar pulls dominate at geostationary height while drag dominates in low orbit, which is why station-keeping fuel budgets differ so much between orbit classes.
Exam move
Start by writing the force balance and deriving v and T yourself, since the derivation takes six lines and fixes the formulas in memory. Then drill the radius habit: for ten altitudes, write r = h + 6,378.137 before computing anything.
Rework the 322 km and 1,400 km circular cases and the Molniya-style ellipse until your answers match the chapter to four figures, then invent an apogee and perigee pair and compute a, e and T unaided. Make a card listing the six elements under the headings size, shape, orientation and timing.
Finally, rehearse the geostationary versus geosynchronous contrast in exactly three conditions, because tutorial questions ask for it word for word.
Working through Kepler's Laws and Orbital Elements in ELEC6103? Sia is AskSia’s AI Electrical Engineering tutor — ask any ELEC6103 Kepler's Laws and Orbital Elements question and get a clear, step-by-step explanation grounded in how ELEC6103 is taught and assessed. Read this chapter free, then take your hardest questions to Sia.