27887 Engineering Mathematics 1
27887 Overview
- 20 credits
- Semester 1, 2026/27
- Level 1 module
- School of Engineering
- Mathematics
What the module covers
Engineering Mathematics 1 is a 20-credit first-year module in the University of Birmingham School of Engineering, taught in Semester 1 of 2026/27. It sets out to give engineers the fundamental mathematical skills their disciplines rely on: quantitative understanding, clear presentation of data, and the ability to interpret and build models of real systems.
- Assessed by Ten weekly Möbius quizzes at 3% each and a January exam worth 70%.
- Exam conditions Long-answer questions with no calculator and no formula sheet.
- Hardest step Applied questions that chain several methods, such as initial conditions on a forced equation.
- How to prepare Memorise the standard results and practise full written working without a calculator.
What you get in the full 27887 Exam Bible
- 11 chapters, 49 pages — every examinable topic, week by week
- 25 original practice questions, each with a model answer in the Exam format
- 11 worked examples, solved the way 27887 marks
- 65 computed figures, redrawn from the course’s own numbers
- Exam-morning plan for the Exam (70%) — what to revise last, where marks are lost
Free on this page: assessment table, chapter map, one worked example, key terms, FAQ. The rest is in the full exam bible.
How 27887 is assessed
| Component | Weight | Format |
|---|---|---|
| Diagnostic test | 0% | Formative self diagnostic test in week 1; no module marks; results shared with your personal tutor |
| Quiz1 Differentiation | 3% | Weekly Möbius quiz, methods questions; two attempts, 30 minutes |
| Quiz 2 Vectors | 3% | Weekly Möbius quiz, methods questions; two attempts, 30 minutes |
| Quiz 3 Differentiation and Integration | 3% | Weekly Möbius quiz, methods questions; two attempts, 30 minutes |
| Quiz 4 Matrices | 3% | Weekly Möbius quiz, methods questions; two attempts, 30 minutes |
| Quiz 5 Integration and Taylor Series | 3% | Weekly Möbius quiz, methods questions; two attempts, 30 minutes |
| Quiz 6 Simultaneous Equations and Eigenvalues | 3% | Weekly Möbius quiz, methods questions; two attempts, 30 minutes |
| Quiz 7 Complex numbers | 3% | Weekly Möbius quiz, methods questions; two attempts, 30 minutes |
| Quiz 8 Differential Equations 1 | 3% | Weekly Möbius quiz, methods questions; two attempts, 30 minutes |
| Quiz 9 Differential Equations 2 | 3% | Weekly Möbius quiz, methods questions; two attempts, 30 minutes |
| Quiz 10 Differential Equations 3 | 3% | Weekly Möbius quiz, methods questions; two attempts, 30 minutes |
| Exam | 70% | January examination; long-answer methods and applied questions; no calculator and no formula sheet |
Weights come from the Canvas Module Assessment Overview and agree with the Semester 1 table in the introductory lecture: 30% from ten quizzes and 70% from the January exam. The diagnostic test in week 1 is formative and carries no marks. A module mark below 40% leads to a resit, and a pass after resit is capped at 40%.
Assessment structure
Ten quiz segments of 3% and the 70% January exam, drawn to scale; together they total 100%.
What other students are asking about 27887
- Where can I find lecture notes or study guides for 27887 at Birmingham?
- The 27887 study guide in AskSia Library covers Engineering Mathematics 1 in 11 chapters, with the assessment table, a chapter-by-chapter topic map, key terms and a worked example, free to read on this page.
- Is there a final exam in 27887, and how much is it worth?
- Yes. In the offering this AskSia Library guide is built from, Exam carries 70% of the 27887 mark; the full split is Quiz1 Differentiation 3%, Quiz 2 Vectors 3%, Quiz 3 Differentiation and Integration 3%, Quiz 4 Matrices 3%, Quiz 5 Integration and Taylor Series 3%, Quiz 6 Simultaneous Equations and Eigenvalues 3%, Quiz 7 Complex number.
- What does 27887 cover on stationary points, parametric and implicit curves?
- In AskSia Library's 27887 guide, the Stationary Points, Parametric and Implicit Curves chapter explains locating and classifying stationary points with the first derivative test, then parametric and implicit gradients.
- What does 27887 cover on standard integrals and integration by substitution?
- In AskSia Library's 27887 guide, the Standard Integrals and Integration by Substitution chapter explains changing the variable, the differential and the limits, with improper integrals.
- What does 27887 cover on integration by parts, trigonometric and hyperbolic forms?
- In AskSia Library's 27887 guide, the Integration by Parts, Trigonometric and Hyperbolic Forms chapter explains integration by parts, powers of sine and cosine, and the hyperbolic functions and identities.
What 27887 covers
Eleven chapters follow the module's three strands: calculus, then vectors, matrices and complex numbers, then differential equations.
Derivatives: Standard Results and the Chain Rule
The derivative as a limit, standard results, and the product, ratio and chain rulesFrom average to instantaneous rate
The first calculus lecture starts from a car journey: distance over time gives an average speed, but the speedometer reading at any instant is the gradient of the distance graph at that moment.
- The derivative as the limit of a chord gradient
- Standard derivatives of powers, logarithms and exponentials
- Derivatives of the six trigonometric functions
- Linearity: constants and sums
- Product and ratio rules
- The chain rule for nested functions
Stationary Points, Parametric and Implicit Curves
Locating and classifying stationary points with the first derivative test, then parametric and implicit gradientsFinding and classifying stationary points
A stationary point is where the derivative is zero.
- Stationary points as zeros of the derivative
- The first derivative sign test
- Maxima, minima and points of inflection
- Applied optimisation in context
- Gradients of parametric curves
- Implicit differentiation
Standard Integrals and Integration by Substitution
Changing the variable, the differential and the limits, with improper integralsSubstitution as a change of variable
Integration by substitution renames an awkward inner expression as u so that the integrand becomes a standard integral.
- Standard integrals as reversed derivatives
- Recognising a derivative inside the integrand
- Converting the differential and the limits
- Odd powers of sine and cosine
- Trigonometric and hyperbolic substitutions
- Improper integrals with an infinite limit
Integration by Parts, Trigonometric and Hyperbolic Forms
Integration by parts, powers of sine and cosine, and the hyperbolic functions and identitiesHyperbolic functions
Cosh and sinh are built from exponentials: cosh x is the average of eˣ and e^(−x), and sinh x is half their difference.
- Definitions of cosh, sinh and tanh
- Hyperbolic identities and derivatives
- Integration by parts for definite integrals
- Choosing the factor to differentiate
- Double-angle identities for trigonometric powers
- Averages of periodic signals
Maclaurin and Taylor Series
Polynomial approximations built from derivatives at a point, and when to stopPolynomials that copy a function
A Maclaurin series rebuilds a function near zero from its value and derivatives there: the constant term matches the value, the linear term the slope, the quadratic term the curvature, and so on.
- Maclaurin series from derivatives at zero
- Taylor series about a general point
- Truncating a series to a stated power
- Accuracy close to and far from the centre
- Standard series for exponential, sine, cosine and logarithm
- Series for products and composite functions
Vectors, Scalar Products and Vector Products
Magnitude and unit vectors, angles from the scalar product, normals and areas from the vector productTwo products with different outputs
Vectors in this module carry magnitude and direction, and dividing by the magnitude gives a unit vector.
- Magnitude and unit vectors
- Vectors between two points
- Angles from the scalar product
- Perpendicular vectors
- Normals from the vector product
- Areas of parallelograms and triangles
Determinants, Adjoint Inverses and Gaussian Elimination
Minors and cofactors, singular matrices, the adjoint inverse and row operationsDeterminants and singular matrices
The matrices column of the module runs from addition and multiplication through minors, cofactors and determinants to inverses and simultaneous equations.
- Minors, cofactors and the sign pattern
- Expanding a three-by-three determinant
- Singular matrices and zero determinants
- Inverse by the adjoint method
- Gaussian elimination and back substitution
- Solving simultaneous equations with an inverse
Eigenvalues and Eigenvectors
Characteristic equations, eigenvectors by elimination, and vibration modesDirections a matrix does not turn
An eigenvector of a matrix is a non-zero vector that the matrix only stretches, shrinks or reverses, and the factor is its eigenvalue.
- The eigenvalue equation Ax = λx
- Characteristic equations from determinants
- Eigenvectors by Gaussian elimination
- Recognising an eigenvector without calculation
- Common factors that avoid a cubic
- Natural frequencies and mode shapes
Complex Numbers, the Argand Diagram and Phasors
Cartesian, polar and exponential forms, division by the conjugate, and impedance phasorsThree ways to write one number
Engineering papers in this module write the imaginary unit as j.
- Cartesian form and the complex conjugate
- Modulus, argument and the Argand diagram
- Division by multiplying by the conjugate
- Polar and exponential forms through Euler's relation
- Impedances in series and in parallel
- Current phasors and their time-domain meaning
First-Order Differential Equations
Classification, separation of variables, integrating factors and initial conditionsClassify first
The differential equations column opens with classification: the order is the highest derivative present, and an equation is linear when the unknown and its derivatives appear only to the first power. That decides the method.
- Order and linearity
- Separation of variables
- Integrating factors for linear equations
- Initial and boundary conditions
- Directly integrable equations
- Exponential approach to a steady state
Second-Order Differential Equations and Initial Conditions
Auxiliary equations, complementary functions, particular integrals and particular solutionsComplementary function
A linear second-order equation with constant coefficients is solved in two parts.
- The auxiliary equation from an exponential trial
- Real, repeated and complex roots
- Complementary functions for each case
- Trial forms for particular integrals
- Applying initial conditions to the general solution
- Interpreting transient and steady-state behaviour
The Canvas topic table has three columns. Calculus runs from standard derivatives and the product, quotient and chain rules through parametric and implicit differentiation to standard integrals, substitution, trigonometric and hyperbolic forms, integration by parts, definite integrals, and Maclaurin and Taylor series.
The second column covers complex numbers in Cartesian and exponential form with the Argand diagram, vectors with scalar and vector products, and matrices up to determinants, inverses by the adjoint and by Gaussian elimination, simultaneous equations, eigenvalues and eigenvectors.
The third column covers ordinary differential equations, from separation of variables and integrating factors to second-order homogeneous and inhomogeneous equations, alongside Newton's method and Euler's method.
How the weeks run
During weeks 1 to 7 one lecture each week treats calculus and the other linear algebra.
From week 8 to week 11 both lectures turn to complex numbers, differential equations and numerical methods. A typical week brings two lectures, one examples class in person, one recorded examples class, methods and applied question sheets, and a Möbius quiz.
How the mark is built
Ten Möbius quizzes of 3% each supply 30% of the module mark and test methods only.
The January examination supplies the other 70% and adds applied questions set in engineering contexts. A self diagnostic test in the first week is formative.
Worked example · free
Forced response from rest: particular integral and initial conditions
- 2Complementary function: the auxiliary equation r² + 5r + 6 = 0 factorises as (r + 2)(r + 3) = 0, so the homogeneous solution is A e^(−2t) + B e^(−3t).
- 3Particular integral: the forcing is a ramp, so try Ct + D. Substituting gives 5C + 6Ct + 6D = 12t + 4, hence C = 2 and D = −1, a particular integral of 2t − 1.
- 2Conditions on the full solution: y(0) = A + B − 1 = 0 and y′(0) = −2A − 3B + 2 = 0, which give B = 0 and A = 1.
- 1Result: y = e^(−2t) + 2t − 1, which leaves zero with zero slope.
Key terms
- Chain Rule
- A rule for differentiating a function of a function by multiplying the derivative of the outer layer by the derivative of the inner one.
- Stationary Point
- A point on a curve where the first derivative is zero, which may be a maximum, a minimum or a point of inflection.
- First Derivative Test
- A method that classifies a stationary point from the sign of the derivative just before and just after it.
- Integration by Substitution
- A method that renames an inner expression as a new variable and converts the differential and any limits with it.
- Integration by Parts
- A method for integrating a product that differentiates one factor and integrates the other.
- Maclaurin Series
- A power series that approximates a function near zero from the values of its derivatives at zero.
- Scalar Product
- An operation on two vectors that returns a number equal to their magnitudes multiplied by the cosine of the angle between them.
- Vector Product
- An operation on two vectors that returns a vector perpendicular to both, whose length is the area of the parallelogram they span.
- Adjoint Matrix
- The transpose of a matrix of cofactors, which gives the inverse once divided by the determinant.
- Gaussian Elimination
- A procedure that uses row operations on an augmented matrix to clear entries below the diagonal before back substitution.
- Eigenvector
- A non-zero vector whose direction a matrix leaves unchanged, scaling it by a factor called the eigenvalue.
- Integrating Factor
- A multiplier that turns the left side of a linear first-order equation into the derivative of a single product.
- Auxiliary Equation
- A polynomial equation produced by substituting an exponential trial solution into a constant-coefficient linear differential equation.
27887 FAQ
Is there a final exam in Engineering Mathematics 1, and what is it worth?
Yes. The examination is held in January and carries 70% of the module mark. The introductory lecture describes it as entirely long-answer, and the Canvas assessment page says it contains applied questions as well as methods questions. The 2026 specimen paper allows three hours, asks candidates to answer every question and totals 50 marks.
How do the weekly Möbius quizzes work?
There are ten quizzes, each worth 3% of the module, so together they make up 30%. Canvas says each one opens on a Wednesday at 11am UK time and closes two weeks later, after the relevant tutorial, with two attempts of 30 minutes. The introductory slides give Tuesday, so follow the date shown on each quiz, and remember that closing the window does not submit it.
Can I use a calculator or a formula sheet in the exam?
The introductory lecture states that calculators are not allowed and that no formula sheet is provided, and the specimen paper is headed no calculator. Standard derivatives, integrals, series and identities therefore have to be memorised, although a question may print an identity it relies on, as the specimen does for hyperbolic functions. Exact answers such as fractions, surds and multiples of e or π are complete.
Are past papers available, and do they match the current exam?
The Canvas home page links an area of past papers and generic feedback. The introductory lecture adds that two past exam questions, both applied, are released in week 8, with sign-up for online workshops on their solutions in week 11. Earlier papers included a multiple-choice section that the current long-answer exam does not, so practise their long questions and use the 2026 specimen for layout.
What is the formative self diagnostic test in week 1?
It is a Möbius test you can open at any time during the first week, after which you have one hour to finish. It carries no module marks. Its purpose is to show which areas of school mathematics you may need help with; results go to your personal tutor, and a guidance sheet links each question to worksheets on topics such as indices, logarithms and trigonometric identities.
What happens if I fail the module?
A module mark below 40% without extenuating circumstances leads to a resit of the assessment components, and you may choose not to resit components you have already passed. A pass after the resit is capped at 40%. The introductory lecture also notes that an accredited engineering degree now requires every module to be passed, with resits in the supplementary period.
Which topics do students find hardest?
The generic feedback points to the long applied questions. Reports describe sign tests replaced by second derivatives against instructions, substitutions with a wrong differential, determinants spoiled by missing brackets, eigenvectors given without a free constant, and initial conditions applied to the wrong expression. On the January 2025 paper a worryingly large number did not attempt the particular solution at all.
Questions students ask in each 27887 chapter
- Do I need to differentiate from first principles in the exam?
- The week 1 notes say working derivatives out from the limit definition is neither necessary nor useful in general, and that you should learn the standard results instead. Understand the limit idea, but expect to apply standard derivatives and the combination rules rather than rebuild each result. Chapter 01 · Derivatives: Standard Results and the Chain Rule
- Can I use the second derivative instead of the first derivative test?
- Only when the question allows it. Feedback on the 2022-23 paper describes candidates who used the second derivative when the question asked for the signs of the first derivative, and they did not receive the marks for the requested method. Chapter 02 · Stationary Points, Parametric and Implicit Curves
- Do I have to change the limits when I substitute?
- For a definite integral, yes, unless you convert back to the original variable before evaluating. Changing the limits is cleaner, and the specimen solutions award a separate mark for doing it. Chapter 03 · Standard Integrals and Integration by Substitution
- How do I decide which factor to differentiate in integration by parts?
- Choose the factor whose derivative is simpler, so that the second integral is easier than the first. A power of t multiplied by an exponential is the classic case: differentiate the power and integrate the exponential. Chapter 04 · Integration by Parts, Trigonometric and Hyperbolic Forms
- How many terms should my series include?
- Exactly as many as the question asks for, such as up to and including the term in x³. The truncation is part of the answer, so adding or omitting terms changes the model being described. Chapter 05 · Maclaurin and Taylor Series
- When do I use the scalar product and when the vector product?
- Use the scalar product for angles, perpendicularity and projections, because it returns a number. Use the vector product for a normal to a plane or for an area, because it returns a perpendicular vector whose length is that area. Chapter 06 · Vectors, Scalar Products and Vector Products
- How do I avoid sign errors when expanding a determinant?
- Bracket every product before simplifying, especially when entries such as −ν/E carry their own minus signs. The January 2025 feedback traced most determinant slips to missing or misused parentheses. Chapter 07 · Determinants, Adjoint Inverses and Gaussian Elimination
- Why must an eigenvector include a free constant?
- Any non-zero multiple of an eigenvector is also an eigenvector, so the answer is a direction. Feedback on an earlier paper reports most candidates losing marks for leaving out the scaling constant. Chapter 08 · Eigenvalues and Eigenvectors
- Why do engineers write j instead of i?
- In electrical work i usually denotes current, so the imaginary unit is written j. The past papers for this module use j throughout, and an answer that drops j altogether was one of the losses listed in the 2017-18 feedback. Chapter 09 · Complex Numbers, the Argand Diagram and Phasors
- How do I know whether to separate variables or use an integrating factor?
- If the right side factorises into a function of x times a function of y, separate. If the equation is linear but not separable, write it in standard form, dy/dx + P(x)y = Q(x), and use the integrating factor exp(∫P dx). Chapter 10 · First-Order Differential Equations
- What trial function should I use for a ramp input?
- Use At + B with both coefficients free. The January 2025 feedback describes trials of the form At or t + B, which have one coefficient too few to match both the t term and the constant. Chapter 11 · Second-Order Differential Equations and Initial Conditions
How to study for the exam
Work the module the way its assessment is built. Each week, complete the methods sheets before the Möbius quiz, then attempt the applied sheet under exam conditions: no calculator, no notes and every line written out.
Keep a single page of standard results covering derivatives, integrals, series, identities and the matrix and eigenvalue equations, and rewrite it from memory every few days, because the exam provides no formula sheet.
When you check an answer against a model solution, mark yourself the way the specimen solutions do, crediting the substitution, the differential, the limits and each stated method line rather than only the final value. From week 8, rehearse whole applied questions that chain several methods, such as a circuit equation that needs an auxiliary equation, a particular integral and two initial conditions.
In the last fortnight before January, alternate one long calculus question with one long matrix or differential equations question each evening, and finish by reading the generic feedback for the slips that cost earlier candidates their marks.
Your AI Mathematics tutor for 27887
Stuck on a hard 27887 question? Sia is AskSia’s AI Mathematics tutor — ask any 27887 Engineering Mathematics 1 question and get a clear, step-by-step explanation grounded in how the course is actually taught and assessed. Read this whole study guide free, then take your hardest questions to Sia.