40366 Chap.1 Laboratory Safety and Risk Assessment
Laboratory Safety and Risk Assessment
Why laboratory safety is written down
The first lecture of the module spends half its time on health and safety, and the Health and Safety Compliance quiz on Canvas must be completed before any practical work. UK law since the Health and Safety at Work etc. Act 1974 makes the University responsible for controlling risk while expecting every student to take reasonable care.
The Act grew out of the 1966 Aberfan disaster, which an inquiry attributed to ignorance and failures of communication.
Scoring a hazard
A hazard is something with the potential to cause harm; risk combines how likely that harm is with how severe it would be.
The module scores both on five-point scales and multiplies them, giving a number from 1 to 25. A five-step routine identifies hazards, names who could be harmed, evaluates the risk, records the findings and reviews them.
Controls and conduct
Controls are grouped as engineering controls such as guards and fume hoods, administrative controls such as briefings and signage, and personal protective equipment.
Good practice covers clothing, food and drink, tidiness and preparation, and repeated low-level breaches escalate from a warning to a two-week ban from the facility.
What this chapter covers
- 01
Origins of the Health and Safety at Work etc. Act 1974
- 02
Hazard versus risk
- 03
The five-step risk assessment
- 04
Likelihood and severity scoring
- 05
Engineering, administrative and protective controls
- 06
Good laboratory practice and clothing rules
- 07
Low-level breach escalation
Worked example · free
Score a walkway trip hazard before and after a control
- 1Before: likelihood 4 times severity 3 gives a score of 12.
- 1After: likelihood 2 times severity 3 gives a score of 6.
- 1The reroute lowers likelihood only; a fall onto the floor would still be a moderate injury, so severity stays at 3.
- 1Classify the reroute as an engineering control, because it changes the layout rather than relying on people to step over the lead.
Key terms
- Hazard
- Anything in a process, piece of equipment or substance that could injure someone or damage their health.
- Severity Score
- Rating from 1, negligible, to 5, catastrophic, for how bad the harm would be if the hazard were realised.
- Engineering Control
- Change to equipment or layout, such as a guard, interlock or fume hood, that removes or contains a hazard at source.
- Administrative Control
- Rule, procedure, sign or briefing that reduces risk by changing how people carry out the work.
- Personal Protective Equipment
- Items worn by the user, such as gloves, a lab coat or eye protection, that guard only the wearer.
Laboratory Safety and Risk Assessment FAQ
What must I complete before my first practical session?
The Health and Safety quiz on Canvas has to be finished before the labs begin, and students who have not done it are not allowed to take part. You also need enclosed shoes, full leg cover and a way to tie back long hair.
How is a risk score calculated in the lab risk assessment?
Likelihood and severity are each rated from 1 to 5 and multiplied together, so scores run from 1 to 25. Comparing the score before and after controls shows whether a proposed measure is worth adopting.
Why is protective equipment the last choice of control?
Gloves, coats and glasses protect only the person wearing them and only while they are worn correctly. Guards, interlocks and extraction act on the hazard itself, so they protect everyone in the room.
What happens after repeated safety breaches in a teaching laboratory?
A first minor breach brings a warning, a second an email to the principal investigator and Head of School, and a third a two-week ban from that facility followed by repeat training. More serious cases go to the College misconduct committee.
Assessment move
Pick one lab script and write a short risk assessment for it from scratch: list each hazard by family, score it before controls, add one engineering, one administrative and one protective control, and score it again. Then check your list against the safety section of the script and note anything you missed. Repeat this for each new lab so that the briefing at the start of the session confirms what you already expect.
Working through Laboratory Safety and Risk Assessment in 40366? Sia is AskSia’s AI Engineering tutor — ask any 40366 Laboratory Safety and Risk Assessment question and get a clear, step-by-step explanation grounded in how 40366 is taught and assessed. Read this chapter free, then take your hardest questions to Sia.