King's College London · FACULTY OF ENVIRONMENTAL SCIENCE

7SSGN223 Chap.5 Environmental Impact Assessment and SEA

- one subject, every graph, every model, every mark
6 Chapters2-page Bible
Our own words - no uploaded lecturer files
Updated for this semester
Chapter 5 of 8 · 7SSGN223

Environmental Impact Assessment and SEA

Use assessment before the decision closes

Environmental Impact Assessment is a decision process for understanding likely project effects before consent, while Strategic Environmental Assessment works at the broader level of plans, programmes or policies. The difference in scale changes which alternatives, baselines and institutions matter.

Both are strongest when environmental evidence can still alter the choice.

Give each stage one job

Screening asks whether assessment is required. Scoping selects material pathways. Baseline work describes relevant pre-project conditions. Prediction estimates change, assessment interprets significance, alternatives test other routes, mitigation modifies the design and monitoring checks performance.

Consultation can inform several stages when it changes evidence or response.

Write source-pathway-receptor chains

A broad topic such as water is not yet an impact pathway. Name the source, transport or exposure route, receptor and consequence. Construction runoff, for example, begins with disturbed material, moves with rainfall, reaches a defined water body and changes a measured condition.

This chain guides baseline data and mitigation.

Close the monitoring loop

A promise to monitor is incomplete without variable, location, frequency and trigger. State the result that will pause activity, prompt inspection or revise mitigation.

Monitoring has analytical value because it tests predictions and feeds observed outcomes back into management.

Compare realistic alternatives

The do-nothing case is a changing future without the proposal, not an assumption that present conditions freeze. Compare sites, technologies, scales or timings against the same receptors and assumptions.

An option with fewer documented impacts may simply have been studied less carefully.

State the common baseline, identify data gaps and explain whether avoidance, reduction or restoration is the most credible response for each material pathway.

Carry residual effects into consent

Magnitude alone does not settle significance; duration, reversibility, receptor sensitivity, protection and cumulative pressure also matter. Keep prediction separate from the value judgment used to classify it.

Assess what remains after mitigation, name the performance indicator and responsible party, and include existing or planned pressures across a justified boundary. The recommendation should identify the preferred alternative, unresolved harm and corrective power available if monitoring exceeds the prediction.

In this chapter

What this chapter covers

  • 01

    Project Screening

  • 02

    Impact Scoping

  • 03

    Baseline Evidence

  • 04

    Alternatives Analysis

  • 05

    Mitigation Design

  • 06

    Follow-up Monitoring

Worked example · free

Scope a riverside development

Q [8 marks]. AskSia-authored practice. A logistics site is proposed beside a river and housing. Build one runoff pathway and one noise pathway, then identify evidence and mitigation. This weighting is for practice and is not an official University assessment scheme.
The route moves from screening to prediction and mitigation, while monitoring feeds observed outcomes back into the earlier assumptions.The route moves from screening to prediction and mitigation, while monitoring feeds observed outcomes back into the earlier assumptions. screening scoping baseline prediction mitigation monitoring
The route moves from screening to prediction and mitigation, while monitoring feeds observed outcomes back into the earlier assumptions.
  • 3Write both source-pathway-receptor chains.
  • 2Match each chain to baseline evidence.
  • 3Specify mitigation and monitoring triggers.
Runoff links exposed material, rainfall transport and the river reach, so baseline and monitoring need comparable flow context and defined sites. Noise links machinery, propagation and exposed homes, so operating hours, barriers and receptor measurements matter. Each mitigation needs a performance trigger.
Sia tip — If the receptor cannot be named, the impact pathway is not scoped yet.
Glossary

Key terms

Screening
Screening determines whether a proposal is likely to require formal environmental assessment under the relevant decision route.
Scoping
Scoping identifies the material impacts, alternatives and evidence that the assessment must address.
Residual Impact
A Residual Impact is the environmental effect expected to remain after mitigation has been applied.
FAQ

Environmental Impact Assessment and SEA FAQ

What is the practical difference between screening and scoping?

Screening asks whether assessment is required and needs enough information to judge likely significance. Scoping assumes a study route and decides which impact pathways, alternatives and evidence are material. Confusing them can demand full baseline detail before the relevant issues are selected.

Why must alternatives be compared consistently?

Different options need the same receptors, assumptions and decision criteria. Otherwise the preferred option can appear better because it has thinner evidence or a favourable baseline. Include the do-nothing case and realistic site, scale, timing or technology alternatives.

What makes an environmental monitoring condition useful?

It names a variable, location, frequency, method and trigger, then links the trigger to a management response. A general commitment to monitor cannot show whether mitigation worked or when activity should pause, change or be reviewed.

How should cumulative effects enter assessment?

Define the existing and planned activities, affected receptor, geographic boundary and time horizon. Combine pathways only where they act on the same receptor or system. Then test whether the preferred alternative or significance judgment changes when the proposal is assessed with those pressures rather than in isolation.

Study strategy

Assessment move

Take a fictional proposal and write three source-pathway-receptor chains. For each, choose a baseline, alternative, mitigation and measurable trigger. Then identify one consultation input that could change scope or design. Practise separating project-level EIA from plan-level SEA by changing the decision scale. Close with residual effects and the monitoring result that would reopen the decision.

Add a realistic do-nothing future and two design alternatives, ensuring every option uses the same receptors and assumptions. Rank significance using magnitude, duration, reversibility and sensitivity rather than one adjective. Combine the project with an existing pressure to test cumulative effects across a justified area and period. Replace any generic mitigation with a mechanism, performance indicator and responsible party.

Finish by explaining whether the preferred option depends on avoidance, successful control or acceptance of a residual impact.

A+Everything unlocked
Unlocks this Bible + all 18 of your subjects at King's College London, plus 1,000+ more Bibles across the AskSia library.
Sia - your 7SSGN223 tutor, unlimited, worked the way the exam marks it
The full 2-page Bible + practice bank with worked solutions
Chrome extension - sync your LMS so Sia knows your deadlines
Bilingual EN / Chinese on every Bible and every Sia answer
$0.99 Trial
30-day money-back · cancel in one tap · how it works
7SSGN223 · Environmental Science for Sustainability - independent study guide on the AskSia Library. More King's College London subjects · Microeconomics across all universities