The University of Manchester · FACULTY OF ENGINEERING

CIVL13001 Chap.2 Idealisation and Free-Body Diagrams

- one subject, every graph, every model, every mark
7 Chapters3-page Bible
Our own words - no uploaded lecturer files
Updated for this semester
Chapter 2 of 8 · CIVL13001

Idealisation and Free-Body Diagrams

Idealisation and Free-Body Diagrams turns a real object into a solvable mechanical system. The process selects a body, replaces geometry with appropriate line or surface models, translates support freedoms into reactions and preserves every applied action needed by the question. Distributed loads, self-weight, couples and connection forces must be represented with correct locations and units.

A complete diagram can stand alone as the source for equilibrium equations.

The isolation boundary controls which interactions are external. On a whole structure, connection forces between its own members cancel. On a cut member or joint, those same interactions must be shown. Roller, pin and fixed restraints are distinguished by the motions they prevent, not by decorative symbols.

Equivalent resultants preserve global force and moment only when their magnitudes and centroid locations are correct. They should not replace the original load shape for local internal-action diagrams. Dimensions belong where they define lines of action or lever arms. Axes and sign conventions turn arrow assumptions into equations and make negative results interpretable.

These habits keep the drawing mechanically complete while avoiding irrelevant detail.

In this chapter

What this chapter covers

  • 01

    Body boundaries

  • 02

    Line-member idealisation

  • 03

    Roller reactions

  • 04

    Pin reactions

  • 05

    Fixed reactions

  • 06

    Distributed resultants

  • 07

    Free-body completeness

Worked example · free

Idealise a loaded balcony edge

Q [6 marks]. Model a six metre pin-and-roller beam carrying 3 kN/m and a 5 kN point load two metres from the left support. The marks shown here are original study guidance and not an official University assessment scheme.
The workflow moves from the real structure to an isolated body, replacing every removed contact with reactions before checking the restrained degrees of freedomThe workflow moves from the real structure to an isolated body, replacing every removed contact with reactions before checking the restrained degrees of freedom.real structuregeometry + useidealiselines + jointsisolate bodydraw boundaryreplace contactforces +momentscheckDoFeach simplification must preserve the actions needed by the question
The workflow moves from the real structure to an isolated body, replacing every removed contact with reactions before checking the restrained degrees of freedom.
  • 2Replace the pin with horizontal and vertical reactions and the roller with one vertical reaction.
  • 2For global reactions, replace the uniform load by 18 kN at the span midpoint and retain the point load at its stated position.
  • 2Add axes, lever arms and a sign convention, then count three reaction unknowns and three planar equilibrium equations.
The external model contains H_A, V_A, V_B, an 18 kN resultant at midspan and the separate 5 kN load. The practice allocation is not a University marking scheme.
Sia tip — Count restrained translations and rotations before drawing reactions, then check that every removed contact appears exactly once.
Glossary

Key terms

Idealisation
A simplification that retains the mechanics relevant to the stated question.
Reaction moment
A support action that resists rotation at a restrained connection.
Equivalent resultant
A force and location that reproduce the net force and moment of a distributed action for global equilibrium.
FAQ

Idealisation and Free-Body Diagrams FAQ

What should I isolate first?

Isolate the smallest body that exposes the requested unknowns without creating too many new ones. Whole structures suit external reactions, while joints, cut members and beam segments reveal internal actions.

How many reactions does a planar pin provide?

An ideal planar pin restrains horizontal and vertical translation, so it provides two force components. It allows rotation and therefore does not supply a reaction moment.

When can a distributed load become one force?

Use its equivalent resultant and centroid for whole-body equilibrium. Return to the distributed intensity when internal shear and moment vary with position because local behaviour depends on the load shape.

Study strategy

Exam move

Practise free-body diagrams without solving them immediately. Choose a real or sketched object, draw the isolation boundary and list every interaction crossing it. Translate each support by its restrained motions, add self-weight unless the problem excludes it, and locate all force lines of action with dimensions. Then perform three audits. The reaction audit compares support freedoms with drawn components.

The unit audit separates forces, moments and force per length. The unknown audit checks whether the available equilibrium equations can solve the external system. Repeat with a different body cut from the same structure so action-reaction pairs become visible. Include examples with an applied couple, an inclined force and a distributed load. Only after the diagram passes those checks should you write equilibrium.

Record errors under duplicated contact, missing weight, incorrect centroid and incomplete rotational restraint. Redrawing a failed model from memory the next day is more useful than copying a finished diagram. Create a support deck using small cards: roller, pin, fixed end, cable and smooth contact. On the front draw the symbol; on the back list permitted motion and transmitted actions.

Shuffle the cards and place one beside an unlabelled support to force the reasoning from freedom rather than recognition. For distributed actions, practise area and centroid calculations on uniform, triangular and trapezoidal shapes before combining them with beam geometry. Write the equivalent force and its line of action separately.

Then restore the original distribution and explain why local shear differs from a point-load model. Use coloured pencils sparingly: one colour for applied actions, one for reactions and one for dimensions. The colour scheme should reveal duplication if a contact is drawn both as part of the surroundings and as a reaction.

For every completed diagram, cover the original question and ask whether the diagram alone supplies the body, loading, geometry, axes and unknowns needed for equilibrium. If not, add only the missing mechanical information. Finish with a determinacy count, but do not confuse three unknown reactions with guaranteed stability; inspect whether reaction directions are independent and whether the geometry can resist rotation.

This combination of physical motion and equation count gives a more reliable model check.

A+Everything unlocked
Unlocks this Bible + all 41 of your subjects at The University of Manchester, plus 1,000+ more Bibles across the AskSia library.
Sia - your CIVL13001 tutor, unlimited, worked the way the exam marks it
The full 3-page Bible + practice bank with worked solutions
Chrome extension - sync your LMS so Sia knows your deadlines
Bilingual EN / Chinese on every Bible and every Sia answer
$0.99 Trial
30-day money-back · cancel in one tap · how it works