CIVL13001 Structures 1 (Civil)
CIVL13001 Overview
- 10 credits
- Level 1
- Semester 1 2026/27
- Written exam
CIVL13001 Structures 1 (Civil) introduces the mechanics used to turn a real structure into an analysable model. The module begins with structural form, load paths, forces and moments, then develops idealisation, free-body diagrams and planar equilibrium.
- Model first Choose the body, supports and actions before selecting an equation.
- Balance visibly Show force and moment closure with declared signs and units.
- Read diagrams Use jumps, slopes and areas to cross-check beam actions.
- Interpret response Name tension, compression, stress direction or displacement after calculating.
How CIVL13001 is assessed
| Component | Weight | Format |
|---|---|---|
| Other | 15% | Assessed tutorial work. Weight from the official University course unit page fetched 20 October 2026. |
| Written exam | 50% | Written examination. Current format details are supplied through the live module instructions. |
| Report | 5% | Report. Weight from the official University course unit page fetched 20 October 2026. |
| Set exercise | 30% | Assessed online tests or quizzes. Weight from the official University course unit page fetched 20 October 2026. |
All four weights come from the official University course unit page; the captured 2025 group brief is retained only as prior-year context because its weight conflicts with the current catalogue.
What CIVL13001 covers
Eight connected chapters move from structural form and free-body diagrams to reactions, trusses, beam actions, material response, section properties and elastic deflection.
Structural Forms and Load Paths
Structural purpose, ties, columns, beams, trusses, frames and continuous routes from action to restraint.Structural Forms and Load Paths explains how applied actions travel through connected members to supports. The chapter distinguishes ties, columns, beams, trusses, frames, arches and shells by the internal actions they are intended to carry.
- Structural purpose
- Load-path continuity
- Tension members
- Compression members
- Beam and frame action
- Truss idealisation
Idealisation and Free-Body Diagrams
Line models, support freedoms, equivalent loads, isolated bodies and complete external actions.Idealisation and Free-Body Diagrams turns a real object into a solvable mechanical system.
- Body boundaries
- Line-member idealisation
- Roller reactions
- Pin reactions
- Fixed reactions
- Distributed resultants
Equilibrium and Support Reactions
Planar force balance, moment balance, reaction directions, lever arms and independent closure checks.Equilibrium and Support Reactions applies horizontal force balance, vertical force balance and moment balance to planar structures.
- Planar equilibrium
- Moment centres
- Perpendicular distance
- Reaction directions
- Inclined-force components
- Applied couples
Axial Members and Truss Analysis
Tension and compression signs, method of joints, method of sections and truss idealisation limits.Axial Members and Truss Analysis uses imaginary cuts and isolated joints to find internal tension and compression. A consistent assumed-tension convention lets negative algebra identify compression.
- Axial cuts
- Tension convention
- Compression interpretation
- Method of joints
- Method of sections
- Zero-force members
Shear Force and Bending Moment
Beam cuts, diagram jumps, slope relationships, boundary values and area checks.Shear Force and Bending Moment links loading to internal beam actions through aligned diagrams. Distributed load controls the slope of shear, while shear controls the slope of bending moment.
- Beam cuts
- Shear sign
- Moment sign
- Point-load jumps
- Distributed-load slopes
- Area relationships
Material Behaviour and Axial Deformation
Stress, strain, elastic modulus, Poisson response, unit control and extension of axial members.Material Behaviour and Axial Deformation converts force and extension into stress and strain so specimens of different size can be compared.
- Direct stress
- Engineering strain
- Young's modulus
- Elastic response
- Plastic response
- Poisson's ratio
Beam Stress and Section Properties
Neutral axis, elastic bending stress, second moment of area, parallel axes and section modulus.Beam Stress and Section Properties explains how bending moment creates a linear elastic stress distribution across a cross-section. Stress is zero at the neutral axis and reaches its largest magnitude at an outer fibre.
- Plane sections
- Neutral axis
- Bending stress
- Second moment of area
- Parallel-axis theorem
- Composite sections
Beam Curvature and Deflection
Moment-curvature, double integration, rotation, displacement, continuity and support boundary conditions.Beam Curvature and Deflection connects the bending-moment field to the elastic curve. Dividing moment by flexural stiffness gives curvature under the beam assumptions, then integration produces rotation and displacement.
- Moment-curvature
- Flexural stiffness
- Small-slope approximation
- Rotation
- Deflection
- Boundary conditions
Those tools are applied to support reactions, axial members and pin-jointed trusses before the focus moves to beams, internal shear force, bending moment and the diagrams that connect loading to structural response.
The later material links actions to material and geometric behaviour. Direct stress and strain separate force and extension from specimen size.
Young's modulus controls elastic strain, while Poisson's ratio describes lateral response. Beam bending introduces a neutral axis, a linear elastic stress distribution, second moment of area and section modulus.
The final route connects bending moment to curvature, rotation and deflection through integration and boundary conditions.
The official course unit page publishes four assessment rows: assessed tutorial work at 15%, a written exam at 50%, a report at 5%, and assessed online tests or quizzes at 30%. These numeric rows total 100%.
A captured group coursework brief is dated December 2025 and states a different 20% weight, so it is treated as prior-year material rather than the current assessment authority.
The available sources do not state the current written exam duration, sections, question count, permitted materials or hurdle status; students should use the live module instructions for those operational details.
This guide emphasises the parts of a structural answer that remain useful across problem types: identify the body, preserve the load path, replace restraints correctly, declare the sign convention, keep units coherent and interpret the result physically.
Every worked calculation uses original numbers while following relations and solution moves taught in the University materials.
Worked example · free
Find reactions and maximum moment under a uniform load
- 2Replace the distributed load with 32 kN at midspan for global equilibrium. Symmetry gives 16 kN upward at each support.
- 2Write shear as V(x) = 16 - 4x kN, so it becomes zero at x = 4 m.
- 2Write moment as M(x) = 16x - 2x squared kNm. At x = 4 m, the maximum is 32 kNm.
Key terms
- Load path
- The connected route by which applied actions pass through structural members to restraints.
- Idealisation
- A purposeful simplification that retains the geometry, actions and restraints required for analysis.
- Free-body diagram
- A drawing of an isolated body with every external force and moment acting on it.
- Equilibrium
- The condition in which resultant forces and moments on a body are zero.
- Support reaction
- A force or moment supplied by a restraint to prevent a permitted motion from occurring.
- Axial force
- An internal force acting along a member axis as tension or compression.
- Shear force
- An internal transverse resultant that balances actions on a cut part of a member.
- Bending moment
- An internal moment resultant associated with curvature and bending stress in a beam.
- Normal stress
- Force intensity acting perpendicular to an area, commonly calculated as axial force divided by area.
- Engineering strain
- Change in length divided by original length under the stated deformation measure.
- Young's modulus
- The ratio of normal stress to normal strain in the linear elastic range.
- Second moment
- An axis-specific geometric measure that weights area by the square of its distance from that axis.
- Neutral axis
- The line in a beam cross-section where elastic bending strain and stress are zero.
CIVL13001 FAQ
How difficult is Structures 1 (Civil)?
The source supports a broad chain of dependent skills rather than a published difficulty rating. Students must move from idealisation and equilibrium into trusses, beam diagrams, stress, section properties and deflection. Most errors propagate from an early free-body or sign decision, so short mixed practice is more useful than memorising isolated formulas.
What is the assessment structure?
The official course unit page lists assessed tutorial work at 15%, a written exam at 50%, a report at 5%, and assessed online tests or quizzes at 30%. The numeric rows total 100%. A dated 2025 group brief conflicts with this current table and is not used for the current weight split.
What is known about the written exam?
The official course unit page identifies a written exam worth 50%. The captured materials do not publish the current duration, sections, question count, permitted materials or hurdle rule. Use the live module assessment instructions for those details and prepare the mechanics without importing a format from another year.
How should I start a free-body diagram?
Choose the exact body first, remove its surroundings, and replace every removed contact with the forces and moments it can transmit. Add applied actions, self-weight unless excluded, dimensions, axes and an explicit sign convention. The diagram should contain enough information to write equilibrium without returning to the original picture.
When should I use joints or sections for a truss?
Use the method of joints when forces in most members are needed and a joint with at most two unknowns is available. Use the method of sections when only selected member forces are required, cutting through no more than three independent unknowns and choosing moments to eliminate two where possible.
How do I check shear and bending moment diagrams?
Align load, shear and moment on one horizontal scale. Point loads create shear jumps, applied couples create moment jumps, distributed load controls shear slope, and shear controls moment slope. Boundary values and signed areas should close the diagrams at the supports.
What should I revise first?
Begin with free-body diagrams and support reactions because every later calculation depends on them. Then alternate truss and beam-action problems, followed by stress, section-property and deflection chains. Record whether each error came from the model, sign, units, geometry, equilibrium or boundary conditions, and redo a fresh problem of that type.
Questions students ask in each CIVL13001 chapter
- Why does structural form matter before calculation?
- Form predicts which internal actions dominate and which idealisations are defensible. A cable is suited to tension, a column to compression, a beam to shear and bending, and a truss to axial transfer through pin-jointed members. Chapter 01 · Structural Forms and Load Paths
- What should I isolate first?
- Isolate the smallest body that exposes the requested unknowns without creating too many new ones. Whole structures suit external reactions, while joints, cut members and beam segments reveal internal actions. Chapter 02 · Idealisation and Free-Body Diagrams
- Why take moments about a support?
- Forces passing through the selected support have zero lever arm, so their moments vanish. This removes reaction unknowns and often leaves one equation for the opposite support reaction. Chapter 03 · Equilibrium and Support Reactions
- When is the method of joints efficient?
- It is efficient when forces in most members are required and a joint with no more than two unknown member forces can be selected. Each solved force reduces unknowns at neighbouring joints. Chapter 04 · Axial Members and Truss Analysis
- Why do the diagrams share one horizontal scale?
- Vertical alignment makes every load change, shear jump, shear zero and moment feature comparable at the same beam position. Misaligned sketches hide causal relationships and make segment lengths difficult to audit. Chapter 05 · Shear Force and Bending Moment
- Why use stress instead of force alone?
- Stress divides force by area, allowing the intensity of axial action to be compared between specimens with different cross-sections. Force alone cannot distinguish the effect of carrying the same load through different areas. Chapter 06 · Material Behaviour and Axial Deformation
- Why does beam depth matter so much?
- For a rectangular section, second moment contains the cube of depth about the relevant axis. Moving material farther from the neutral axis therefore increases bending stiffness and reduces stress rapidly for the same moment. Chapter 07 · Beam Stress and Section Properties
- Why are two boundary conditions needed?
- Double integration introduces two constants for each uniform region. Two independent physical conditions, such as fixed-end rotation and displacement or zero displacement at two supports, determine them. Chapter 08 · Beam Curvature and Deflection
How to study for the exam
Study the module as a dependency chain. Start each session with one five-minute free-body diagram and reaction calculation, because those skills support trusses, beam actions and deflection. On alternate days solve a full truss route and a full beam route. For trusses, assume unknown member forces are tensile, use signs to classify compression, and check both force directions at the final joint.
For beams, align load, shear and moment diagrams, mark jumps and test signed areas. Add material and section calculations only after the internal action is clear: keep force, length, area and modulus in one unit family, name the bending axis and locate the neutral axis. Finish with a deflection problem in which boundary conditions are written before integration. Maintain an error ledger organised by cause rather than chapter.
Useful categories are missing action, wrong support freedom, lever arm, component direction, unit conversion, axis selection and boundary constant. In the final week, solve mixed chains with fresh geometry and explain one physical check after every result. Confirm the current written exam logistics on Canvas because the captured sources do not publish its operating format.