EART60071 Chap.4 Air Pressure, Lapse Rates and Humidity
Air Pressure, Lapse Rates and Humidity
Air Pressure, Lapse Rates and Humidity rebuilds the first half of the module's notes on atmospheric quantities as a set of calculations. It uses the ideal-gas law in its molar form to count moles and molecules and in its density form to find air density, and it explains why a rising parcel cools by adiabatic expansion.
The dry rate of about 10 K per km and the representative saturated rate of 6 K per km turn two-stage ascents into simple arithmetic, and the parcel rate is kept distinct from the measured environmental profile. The humidity half covers water-vapour partial pressure, the module's Clausius-Clapeyron form for saturation vapour pressure, relative humidity and the mixing ratio with its excellent approximation.
These are the calculations that the module's own question set works through with answers, so each section ends with a check on units and on the direction of the result.
What this chapter covers
- 01
Molar and density versions of the gas law
- 02
Adiabatic expansion and cooling
- 03
Parcel versus environmental lapse rate
- 04
Two-stage dry and saturated ascents
- 05
Saturation vapour pressure and relative humidity
- 06
Water-vapour mixing ratio
Worked example · free
Temperature of a thermal that saturates on the way up
- 1Unsaturated stage: 295 − 10 × 1.2 = 283 K at the saturation height.
- 1Saturated stage: 283 − 6 × 0.5 = 280 K at 1.7 km.
- 2After saturation, condensation releases latent heat of about 2.5 × 106 J kg−1, which offsets part of the expansion cooling, so the rate drops from 10 to about 6 K per km.
Key terms
- Environmental lapse rate
- The measured rate at which the surrounding air's temperature falls with height at one place and time.
- Adiabatic expansion
- Expansion of rising air with negligible heat exchange, in which the work done on the surroundings cools the air.
- Relative humidity
- The ratio of the water-vapour partial pressure to the saturation vapour pressure at the same temperature.
- Mixing ratio
- The kilograms of water vapour carried per kilogram of dry air in the same volume.
Air Pressure, Lapse Rates and Humidity FAQ
What is the difference between the parcel and environmental lapse rates?
The environmental lapse rate describes how the temperature of the surrounding air changes with height, as measured at one place and time. A parcel lapse rate is how a moving parcel's own temperature changes as it rises or sinks, about 10 K per km when unsaturated and about 6 K per km when saturated in the exercises. Comparing the two decides stability.
Is it true that warm air holds more water?
The module prefers a more precise statement: saturation vapour pressure climbs steeply as temperature rises, so cooling humid air raises its relative humidity even when its vapour content has not changed, and enough cooling brings it to saturation, which is how rising air forms cloud. Air does not literally contain a fixed reservoir that expands with heat.
When can I use the simpler mixing-ratio formula?
The exact expression divides by total pressure minus vapour pressure. Because vapour pressure is normally a tiny fraction of total pressure, dividing by total pressure alone is an excellent approximation. In the module's worked answer the two forms differ only in the third significant figure, so quote the approximation with a note that it is valid.
How do I find air density from pressure and temperature?
Use the density form of the ideal-gas law: divide the pressure in pascals by the specific gas constant for dry air, about 287 joules per kilogram per kelvin, times the temperature in kelvin. Near the surface the answer is close to one kilogram per cubic metre; much higher in the atmosphere, where pressure is far lower and the air colder, it is much smaller.
Exam move
Treat this chapter as a calculation drill with unit discipline. Convert hectopascals to pascals, grams to kilograms and Celsius to kelvin on the first line of every answer, and keep the molar gas constant with moles and the specific constant with density. Work the module's pressure, lapse-rate and humidity questions with the answers covered, then invent new numbers and redo each type.
For lapse-rate problems, draw the parcel's temperature against height with a kink at saturation, as in the chapter figure, before doing the arithmetic. For humidity, evaluate the bracket in the Clausius-Clapeyron form, exponentiate, and sanity-check the saturation vapour pressure against the values near 280 and 290 K.
Finish each answer with a sentence on what the number means, such as whether the air is saturated, because the assessment rewards interpretation as well as arithmetic.