The University of Manchester · FACULTY OF ENGINEERING

MECH60561 Chap.1 Finite Element Workflow and Assembly

- one subject, every graph, every model, every mark
7 Chapters3-page Bible
Our own words - no uploaded lecturer files
Updated for this semester
Chapter 1 of 8 · MECH60561

Finite Element Workflow and Assembly

Finite Element Workflow and Assembly connects physical idealisation to the global algebraic system. Each element contributes a local stiffness relation defined on its own degrees of freedom. Connectivity maps those entries into global rows and columns, shared-node terms add, and physical boundary conditions convert the assembled equilibrium statement into a solvable system.

The chapter then recovers element forces and support reactions so the displacement solution can be checked against equilibrium, units and deformation direction. A small spring assembly makes compatibility and balance visible before the same rules are applied to larger structural matrices. Energy supplies a further independent control on the solved displacement field.

Final reaction recovery returns the abstract matrix to a physical statement about how the support balances the external action.

In this chapter

What this chapter covers

  • 01

    Physical idealisation

  • 02

    Element degrees of freedom

  • 03

    Local stiffness relations

  • 04

    Connectivity and assembly

  • 05

    Essential boundary conditions

  • 06

    Reaction recovery

  • 07

    Equilibrium and energy checks

Worked example · free

Assemble two springs in series

Q [8 marks]. Two springs with different stiffnesses share a node. Assemble the global system, apply one fixed displacement and solve the two free displacements. The marks shown are an original practice allocation, not a published university marking scheme.
Two local stiffness descriptions pass through degree-of-freedom mapping, where shared entries are added to form the global equilibrium system.Two local stiffness descriptions pass through degree-of-freedom mapping, where shared entries are added to form the global equilibrium system. element 1local stiffnesselement 2local stiffnessdegree mappingadd shared termsglobal systemK d = f
Two local stiffness descriptions pass through degree-of-freedom mapping, where shared entries are added to form the global equilibrium system.
  • 2Map each local matrix into labelled global positions and add the shared diagonal terms.
  • 3Apply the prescribed displacement and solve the reduced equations.
  • 3Recover element forces and the support reaction, then test equilibrium.
The model answer shows connectivity, the global matrix, the constrained equations, solved displacements and a reaction balance. The marks are original practice weighting.
Sia tip — Place global labels around local matrices before adding entries.
Glossary

Key terms

Connectivity
The mapping between local element nodes and the global node system.
Global system
The assembled equilibrium equations expressed in all model degrees of freedom.
Reaction force
The force developed at a prescribed degree of freedom to enforce its boundary condition.
FAQ

Finite Element Workflow and Assembly FAQ

Why assemble before applying constraints?

Assembly must first preserve the complete mapping between element contributions and physical degrees of freedom. Applying constraints too early can hide shared terms or delete the meaning of a row and column. Build the global system, label it, then reduce or modify it using the prescribed motions.

How can I check a global stiffness matrix?

Look for the expected symmetry, shared diagonal additions and couplings only between connected degrees. Test a rigid motion where appropriate, verify units and recover reactions after solving. A zero row may indicate a free or disconnected motion that needs investigation.

What earns method credit in an assembly answer?

Show connectivity, local-to-global mapping, the assembled matrix, the constrained system and the recovery check on separate lines. Earlier solution sheets award visible working when a final number is wrong, so an auditable sequence protects the mechanics of the answer.

Study strategy

Exam move

Begin with two-element models small enough to assemble by hand. Write local degree labels, a connectivity table and the empty global matrix before adding coefficients. After assembly, state each prescribed displacement in physical words and show how it changes the equations. Solve the free degrees, then return to the original system to recover reactions and element end forces.

Check global force balance and internal cancellation at unloaded shared nodes. Add an energy check for stable linear systems by comparing displacement energy with external work. When an error appears, classify it as connectivity, sign, constraint, arithmetic or interpretation and redo the same task with different stiffness values.

Practise reading matrix patterns as physical statements: diagonal resistance, coupled neighbouring motions and zero-energy modes. Finish each answer by stating the displacement direction, force units and whether the reaction balances the applied action. This routine turns assembly from bookkeeping into a transparent model of compatibility and equilibrium. Extend the routine with deliberate variations.

Reverse one element orientation and verify that the physical answer is unchanged after the local labels are mapped correctly. Remove one connection and predict the zero row or rigid motion that should appear. Replace a fixed degree with a prescribed nonzero displacement and separate the known-displacement contribution from the unknown-force terms. These changes make the assembly rule robust beyond one memorised pattern.

Build a colour-free paper diagram with global node numbers above the structure and local node numbers below each element. Draw arrows from local degrees to their global destinations before writing any coefficient. Once the matrix is assembled, trace every off-diagonal term back to a physical connection. A term joining unrelated nodes is evidence of a mapping error, while a missing coupling can reveal an omitted element.

Compare two valid constraint methods only after you understand their bookkeeping. Direct elimination produces a smaller reduced system; row and column modification retains the original size. Whichever method is used, reaction recovery must return to the unmodified equilibrium statement. Practise one problem in which a known settlement enters so you can see that prescribed displacement is not always zero.

During timed work, reserve a narrow margin for the degree order beside every matrix. If arithmetic becomes long, preserve the labelled global and reduced equations because they expose the mechanics and allow partial recovery. After solving, perform three independent controls: reaction balance, internal-force cancellation and non-negative strain energy.

Write the failed control beside any corrected answer so the error log records how it was detected, not merely that it occurred. Finally, explain assembly aloud without symbols: connected elements share motion and their force contributions add. If that sentence is not visible in the matrix, revisit the mapping.

Keep going — explore the course
A+Everything unlocked
Unlocks this Bible + all 41 of your subjects at The University of Manchester, plus 1,000+ more Bibles across the AskSia library.
Sia - your MECH60561 tutor, unlimited, worked the way the exam marks it
The full 3-page Bible + practice bank with worked solutions
Chrome extension - sync your LMS so Sia knows your deadlines
Bilingual EN / Chinese on every Bible and every Sia answer
$0.99 Trial
30-day money-back · cancel in one tap · how it works