MECH60561 Chap.2 Rod Elements and Global Systems
Rod Elements and Global Systems
Rod Elements and Global Systems develops the smallest complete finite element derivation. Linear shape functions interpolate axial displacement between two nodal values, differentiation gives constant element strain, and the material relation gives stress. Virtual work or energy produces the familiar axial stiffness matrix.
The chapter connects this local relation to series assemblies, distributed loading, displacement recovery and force balance, with rigid translation used as an essential check on the strain expression. Parameter changes reveal the physical directions embedded in EA divided by L, while local-axis discipline prevents node order from becoming a hidden sign error.
Series examples distinguish shared displacement compatibility from the force balance acting at an unloaded internal joint.
What this chapter covers
- 01
Linear shape functions
- 02
Axial displacement interpolation
- 03
Strain-displacement relation
- 04
Rod stiffness matrix
- 05
Consistent nodal loading
- 06
Series element assembly
- 07
Stress and force recovery
Worked example · free
Solve a loaded uniform rod
- 3Calculate the coefficient EA divided by L and apply the fixed displacement.
- 3Solve the free displacement and divide the displacement difference by length for strain.
- 2Multiply strain by modulus and recover the applied axial force.
Key terms
- Axial strain
- The change in axial displacement per unit original length.
- Rigid translation
- Equal motion of all element nodes without deformation or internal force.
- Consistent load
- A nodal load vector derived using the same interpolation that defines the element field.
Rod Elements and Global Systems FAQ
Why is strain constant in a linear rod element?
The displacement interpolation is linear between the two nodal values. Its spatial derivative is therefore constant throughout the element. A mesh of several elements can represent a changing strain field as a sequence of elementwise constant values.
What is the fastest rod stiffness check?
Increase modulus or area and stiffness should rise; increase length and stiffness should fall. Equal nodal displacements must create zero strain and zero internal force. The matrix should also be symmetric with positive diagonal and negative coupling terms under the usual local convention.
How do series rods share response?
Connected rods share one displacement at the common global node, which enforces compatibility. With no external force at that joint, their element end forces balance. Different stiffnesses therefore produce different extensions even when the axial force magnitude is the same.
Exam move
Derive the two-node interpolation from its nodal properties before memorising the stiffness matrix. Check that each shape function equals one at its own node, zero at the other and that the pair sums to one. Differentiate the interpolation to obtain strain and run the rigid-translation test.
Build the stiffness coefficient from modulus, area and length with one unit system, then explain why each variable changes resistance in its stated direction. Solve a fixed rod, recover stress and multiply by area to reproduce the end force. Next assemble two and three rods in series, watching how the shared displacement enforces compatibility while internal forces balance.
Practise distributed-load conversion only after the interpolation is clear, and check the nodal vector against the total applied force. Keep local element axes visible when member orientation changes. Review errors under interpolation, unit, node order, global mapping and recovery. A finished answer should report displacement, strain, stress and force with their locations and signs, not stop at the nodal vector.
Develop interpolation fluency by evaluating the field at the quarter point, midpoint and three-quarter point for several nodal pairs. The answer must remain between the nodal values for a simple linear field, and its slope must agree with the displacement difference divided by length. Then give both nodes the same displacement to confirm rigid translation.
Give them equal and opposite values to see how the zero crossing follows from the shape functions. These small tests make the formula behaviour visible. Vary one physical parameter at a time. Double area and predict half the extension under the same force. Double length and predict twice the extension for a uniform rod.
Change modulus while holding geometry fixed and check stress carefully: under prescribed force the stress remains force divided by area, while displacement changes with modulus. This distinction prevents every stiffness change from being described as a stress change. For multiple rods, draw a cumulative-displacement diagram.
The displacement at each node equals the sum of earlier element extensions, while a load-free internal joint preserves force equilibrium. Introduce an intermediate nodal load to break the equal-force pattern and verify that the force jump equals the applied nodal action. Practise local axes for a member whose node order is reversed.
The matrix pattern remains physically equivalent after consistent transformation, but the sign of a local extension statement follows the chosen axis. When a distributed axial load appears, integrate the shape functions and check that the nodal forces sum to the resultant. Avoid replacing that derivation with an arbitrary equal split when the load varies.
End revision sessions by writing the complete chain in words: nodal displacement defines the interpolated field, its derivative gives strain, material response gives stress, and stress times area gives axial force. That chain is the fastest route back when a formula is forgotten.