MECH60561 Chap.4 Two-Dimensional Element Formulations
Two-Dimensional Element Formulations
Two-Dimensional Element Formulations compares plane stress, plane strain and axisymmetry as physical idealisations rather than software labels. The chapter separates displacement interpolation, the strain-displacement matrix and the elastic material matrix before forming element stiffness. It then recovers stress from a stated strain vector and explains how geometry mapping, thickness and circumferential terms enter.
Classification drills require the zero stress or strain quantity and the engineering condition that justifies it. Counter-cases test where each reduction fails, and an energy check helps expose component-order or constitutive mistakes after stress recovery. The Jacobian connects element distortion to derivative mapping and numerical integration quality.
What this chapter covers
- 01
Plane stress
- 02
Plane strain
- 03
Axisymmetric modelling
- 04
Shape-function derivatives
- 05
Strain matrix B
- 06
Elastic matrix D
- 07
Stress recovery and energy checks
Worked example · free
Recover plane-stress components
- 2State the plane-stress assumption and component order.
- 4Calculate the elastic coefficient and multiply by the normal strains.
- 4Recover shear stress, report MPa and check energy density.
Key terms
- Strain matrix
- The matrix mapping element nodal displacement to strain components at a point.
- Elastic matrix
- The constitutive matrix mapping a stated strain-component vector to stress.
- Jacobian
- The mapping derivative connecting natural element coordinates to physical coordinates.
Two-Dimensional Element Formulations FAQ
What is zero in plane stress?
Selected out-of-plane stress components are treated as negligible, which suits a thin body loaded mainly in its plane with free faces. Out-of-plane strain can still occur through Poisson response, and thickness still enters stiffness and force conversion.
What is zero in plane strain?
Selected out-of-plane strain components are treated as negligible, which can represent a section far from the ends of a long constrained body. Out-of-plane stress generally develops because contraction is restrained. The physical condition must justify this assumption.
When does axisymmetry fail?
Axisymmetry requires geometry, material and loading to repeat around one axis. A local nozzle, attachment or asymmetric load breaks that condition even if the main body is cylindrical. Use a local or fully three-dimensional model where the symmetry is broken.
Exam move
Build a comparison table with formulation, physical condition, zero quantity and one counter-case. Practise moving from a structure to a formulation and from a formulation back to a plausible structure. Keep the matrix chain visible: shape functions reconstruct displacement, B differentiates to strain, D maps strain to stress and the volume integral forms stiffness. Write component order beside every matrix.
For quadrilaterals, review how the Jacobian connects natural and physical coordinates and why distorted or inverted elements threaten integration. Solve one plane-stress recovery problem from a complete strain vector and test the result using units, dominant direction and non-negative strain energy. Then explain why the same strain vector under plane strain would not use the same D matrix.
Include thickness or the axisymmetric volume factor explicitly. Review symmetry constraints by sketching permitted tangential movement. When answering element-selection questions, lead with the engineering condition, not the element name, and finish with the limitation that would require a richer model. Strengthen classification by using near-miss examples.
A thin plate under in-plane loading supports plane stress, but a thick block with constrained faces does not. A long tunnel section can support plane strain away from its ends, while an end region cannot. A circular vessel under uniform pressure can be axisymmetric, but one local attachment breaks the repetition. In each case, write the out-of-plane condition before choosing the material matrix.
Practise row ordering with named vectors rather than bare symbols. Place epsilon x, epsilon y and engineering shear beside the strain rows, and place matching stress components beside D. Change the order deliberately once and observe that a dimensionally legal multiplication can still be physically wrong. Use strain energy as a whole-vector control after component recovery. Review natural coordinates on a simple quadrilateral.
Mark the physical nodes, map a central integration point and describe how the Jacobian carries derivatives into x and y. Sketch a badly warped or inverted mapping and explain why a sign-changing determinant threatens integration. This links mesh quality directly to the formulation rather than treating it as a later software warning.
For axisymmetry, include the circumferential strain in the component list and remember that the volume weight changes with radius. A radial-axial drawing represents a revolved body, not a flat plate of arbitrary thickness. Practise thermal strain by separating total strain from mechanical strain before applying D. State how restraint can turn a free thermal expansion into stress.
End each session with one short justification sentence and one counter-case. This prepares the concise element-choice answers that earlier papers reward while keeping the algebra tied to the physical state.