Hong Kong Baptist University · FACULTY OF PHYSICS

PHYS7470 Chap.6 Building Energy Rules and Delivered Cost

- one subject, every graph, every model, every mark
6 Chapters3-page Bible
Our own words - no uploaded lecturer files
Updated for this semester
Chapter 6 of 8 · PHYS7470

Building Energy Rules and Delivered Cost

Codes, standards and audits do different work

Building energy codes establish minimum requirements, while standards provide technical criteria that may be voluntary until adopted into a legal or contractual framework. An energy audit measures actual operation through records, meters and inspection.

Completing a required audit does not prove that the building performs well, and meeting a minimum code does not identify the most valuable improvement.

A strong answer states which instrument creates the duty and which evidence supports the engineering conclusion.

Hong Kong connects compliance with periodic review

The course describes mandatory code implementation and periodic audits for prescribed commercial uses and central services installations.

The audit process produces formal documentation through a registered assessor, but its management value depends on the physical findings. Keep the certificate, measured baseline, operating conditions and recommendation distinct.

This separation prevents administrative compliance from being presented as a quantified saving and prevents an engineering option from being recommended outside the applicable requirements.

Delivered energy is the fair cost basis

Fuel invoices use different purchase units, heat contents and conversion efficiencies.

Point-of-use cost first converts the price to a common input-energy basis and then divides by efficiency to show the operating cost of useful energy. A lower purchase price can therefore produce a higher delivered cost. Units must be converted explicitly, such as megajoules to gigajoules, and efficiency is entered as a decimal.

The result compares operating energy, not the whole project.

Constraints and exclusions remain visible

Point-of-use cost excludes conversion capital, maintenance and other project cash flows, so it is a screening result rather than a final investment decision. The proposed service must also remain equivalent and compliant.

Reducing ventilation can lower energy while breaching an indoor-air requirement, and a cheaper fuel may require equipment or storage changes. State the performance constraint, measurement plan and excluded costs before sending a candidate measure to life-cycle evaluation.

In this chapter

What this chapter covers

  • 01

    Energy codes

  • 02

    Technical standards

  • 03

    Periodic audit

  • 04

    Energy conversion

  • 05

    Point-of-use cost

  • 06

    Ventilation constraint

Worked example · free

Compare delivered fuel cost

Q [7 marks]. Convert two fuel prices and efficiencies to cost per delivered GJ. This weighting helps rehearse conversion, efficiency adjustment and comparison; it is not an official marking scheme.
Compliance and management answer different questions.Compliance and management answer different questions. Codes establish a floor, audits reveal actual performance, and delivered-energy cost compares what useful energy costs at the point of use.Code minimumAudit evidenceDelivered cost
Compliance and management answer different questions. Codes establish a floor, audits reveal actual performance, and delivered-energy cost compares what useful energy costs at the point of use.
  • 3Convert purchase units to cost per input GJ.
  • 4Divide by efficiency and compare.
The lower point-of-use cost identifies the cheaper operating fuel, excluding capital and maintenance.
Sia tip — Use efficiency as a decimal and convert MJ to GJ.
Glossary

Key terms

Energy Code
An enforceable minimum when adopted into law.
Point-of-use Cost
Purchase cost per common energy unit divided by use efficiency.
Delivered Energy
The useful energy reaching the process after conversion losses, used as the common service basis for comparing fuels with different purchase units, heat contents and efficiencies while leaving capital, maintenance and service constraints for later evaluation.
FAQ

Building Energy Rules and Delivered Cost FAQ

How do codes differ from standards?

Codes set minimum requirements and are enforceable within their adopted framework, while standards state technical criteria and may remain voluntary until incorporated into law, a code or a contract. An audit then measures actual operation rather than creating the minimum itself. Its findings still need a baseline, operating condition and economic evaluation.

Why adjust fuel price for efficiency?

Different systems deliver different useful energy from the same input. Adjusting for efficiency places prices on a common delivered-service basis, which purchase price alone cannot provide. Convert heat contents to one energy unit before dividing the input cost by efficiency.

Does point-of-use cost choose a project?

No. It excludes capital, maintenance and other project cash flows, so it only compares operating energy. A life-cycle evaluation is still required before an investment decision. Confirm that both alternatives also deliver the same required service.

Study strategy

Exam move

Separate the compliance requirement, measured performance and economic comparison on three lines. Recheck every energy-unit conversion before dividing by efficiency, and state the useful service being compared. For a proposed measure, list the code or standard constraint, the meter and operating period for the baseline, the delivered-energy calculation and the capital or maintenance items excluded.

That sequence turns a cheap fuel result into a defensible audit recommendation. Build a comparison table with purchase unit, price, heat content, efficiency and delivered cost for each fuel. Convert megajoules to gigajoules explicitly and enter efficiency as a decimal.

Then add a column for service constraints such as ventilation, capacity or operating temperature so the cheaper result does not quietly describe a different service. For the audit layer, name the meter, occupancy condition, weather period and inspection evidence that establish present performance. Treat a certificate as evidence that a process occurred, not as proof of a saving.

Send only technically feasible and compliant measures to the economic chapter, where conversion capital, maintenance and life can be evaluated instead of being hidden inside the point-of-use screen.

Working through Building Energy Rules and Delivered Cost in PHYS7470? Sia is AskSia’s AI Physics tutor — ask any PHYS7470 Building Energy Rules and Delivered Cost question and get a clear, step-by-step explanation grounded in how PHYS7470 is taught and assessed. Read this chapter free, then take your hardest questions to Sia.

A+Everything unlocked
Unlocks this Bible + all 16 of your subjects at Hong Kong Baptist University, plus 1,000+ more Bibles across the AskSia library.
Sia - your PHYS7470 tutor, unlimited, worked the way the exam marks it
The full 3-page Bible + practice bank with worked solutions
Chrome extension - sync your LMS so Sia knows your deadlines
Bilingual EN / Chinese on every Bible and every Sia answer
$0.99 Trial
30-day money-back · cancel in one tap · how it works