Hong Kong Baptist University · FACULTY OF PHYSICS

PHYS7470 Chap.3 Emission Scopes and Building Inventories

- one subject, every graph, every model, every mark
6 Chapters4-page Bible
Our own words - no uploaded lecturer files
Updated for this semester
Chapter 3 of 8 · PHYS7470

Emission Scopes and Building Inventories

Scopes describe a relationship

Operational boundaries classify included emissions as direct, purchased energy or other indirect sources. The label belongs to the relationship between an activity and one defined reporting entity, not permanently to a piece of equipment.

Fuel burned in a controlled generator is direct for its operator, while the service purchased by another organisation may be indirect under that organisation's stated boundary.

Writing the reporting entity above the scope table prevents the physical object from replacing the control analysis.

Direct and purchased-energy sources

Scope 1 contains direct emissions from controlled sources such as stationary combustion, company-operated vehicles and fugitive refrigerant releases. Scope 2 covers emissions associated with purchased energy in the course framework.

Electricity or town-gas records must match the purchaser and meter coverage being reported. A master meter, a common-area account and a tenant submeter describe different boundaries even when they sit in the same building.

Each included row therefore needs both a classification and the record that supports its quantity.

Other indirect sources and exclusions

Scope 3 can contain water and sewage processing, paper disposal, business travel and other activities outside direct control. Its breadth makes a clear category list especially important.

An exclusion should not disappear from the report simply because the activity is difficult to measure, and an activity should not be moved into Scope 3 merely to keep it visible after the entity boundary excludes it.

The inventory note names included categories, omitted categories, allocation methods and known gaps.

Special treatment does not erase the source

The course separates biogenic carbon dioxide from the scopes while retaining methane and nitrous oxide from biomass combustion within the relevant scope. This rule requires gas-specific working rather than a claim that biomass is simply neutral.

A source register should preserve entity, control or purchase relation, activity record, gas treatment and scope destination. That structure prevents double counting and makes conditional cases involving leases, contractors or shared meters easy to identify for follow-up.

In this chapter

What this chapter covers

  • 01

    Scope 1

  • 02

    Scope 2

  • 03

    Scope 3

  • 04

    Building sources

  • 05

    Meter boundaries

  • 06

    Biomass treatment

Worked example · free

Classify a mixed-use building

Q [7 marks]. Assign controlled fuel, purchased electricity, water and tenant energy. Marks used below divide entity definition, scope classification and evidence checks; they are not part of an official assessment scheme.
The scopes radiate from one reporting entity.The scopes radiate from one reporting entity. Moving the entity boundary can change a source classification even though the physical activity and atmospheric release remain unchanged.ReportingentityScope 1 directScope 2 energyScope 3 other indirect
The scopes radiate from one reporting entity. Moving the entity boundary can change a source classification even though the physical activity and atmospheric release remain unchanged.
  • 3Fix the reporting entity and control relationships.
  • 4Assign scopes and evidence records.
Controlled fuel is Scope 1, purchased electricity Scope 2, water processing Scope 3, and tenant-controlled energy remains outside the entity boundary.
Sia tip — Write the entity above the scope table.
Glossary

Key terms

Scope 1
Direct emissions from sources controlled by the reporting entity.
Scope 2
Indirect emissions associated with purchased energy.
Source Register
An inventory table connecting each activity to one reporting entity, control or purchase relationship, scope classification, evidence record and allocation method, making exclusions, uncertainty and possible double counting visible before emission factors are applied.
FAQ

Emission Scopes and Building Inventories FAQ

Is every generator Scope 1?

No. Classification depends on whether the reporting entity controls the emitting source. A contractor-controlled generator can sit outside direct operations even when it is physically located inside the company's building. Check the operating agreement and keep the fuel record with the entity that controls combustion. If the agreement is missing, present both conditional treatments instead of inventing control.

Why does meter coverage matter?

A purchased-energy bill may serve only common areas, one tenant space or the entire property. The record boundary must match the inventory boundary before consumption is classified or multiplied by an emission factor. Any floor-area allocation should be identified as an estimation method rather than direct metering.

How is biomass handled?

The course separates biogenic CO2 from the scopes while keeping CH4 and N2O from combustion within the relevant scope. Gas-specific factors and GWP working must therefore remain visible. Separate source rows allow the scope total and the biogenic disclosure to be reconciled.

Study strategy

Exam move

Write the reporting entity at the top of the page, then sort activities into direct, purchased energy, other indirect and outside-boundary columns. Beside every included row, state the control or purchase fact and attach the record that would quantify it. Circle leases, contractor services, shared meters and biomass because their treatment needs explanation.

Only after the register is complete should you select emission factors. Practise with a mixed-use building and change the reporting entity between landlord and tenant without changing any physical equipment. Note which rows move, which stay outside and which meter evidence follows each entity. For a contractor-controlled source, write conditional classifications until the operating agreement is supplied.

For biomass, split biogenic carbon dioxide from methane and nitrous oxide rather than labelling the entire fuel neutral. Review the finished register for duplicates: one activity should have one responsible entity, one record and one classification within the inventory. Then check exclusions, because a source outside the entity boundary should not be moved into Scope 3 merely to keep it visible.

This routine turns a scope list into an auditable building inventory.

Working through Emission Scopes and Building Inventories in PHYS7470? Sia is AskSia’s AI Physics tutor — ask any PHYS7470 Emission Scopes and Building Inventories question and get a clear, step-by-step explanation grounded in how PHYS7470 is taught and assessed. Read this chapter free, then take your hardest questions to Sia.

A+Everything unlocked
Unlocks this Bible + all 16 of your subjects at Hong Kong Baptist University, plus 1,000+ more Bibles across the AskSia library.
Sia - your PHYS7470 tutor, unlimited, worked the way the exam marks it
The full 4-page Bible + practice bank with worked solutions
Chrome extension - sync your LMS so Sia knows your deadlines
Bilingual EN / Chinese on every Bible and every Sia answer
$0.99 Trial
30-day money-back · cancel in one tap · how it works