The University of Hong Kong · FACULTY OF ENGINEERING

ENGG1000 Chap.10 Forces, Energy and Momentum in Dynamics

- one subject, every graph, every model, every mark
8 Chapters4-page Bible
Our own words - no uploaded lecturer files
Updated for this semester
Chapter 10 of 10 · ENGG1000

Forces, Energy and Momentum in Dynamics

Three balances organise dynamics

Newton's second law connects net force and acceleration at an instant. Impulse-momentum integrates force over time, while work-energy integrates force along displacement.

Each route removes different unknowns, so method selection should follow the given interval and requested quantity.

Conservation depends on the system

Mechanical energy is conserved only when non-conservative work is absent or explicitly accounted for. Linear momentum is conserved when net external impulse is negligible over the interval.

Internal interaction forces cancel only after the system boundary is chosen, and kinetic energy may decrease in a momentum-conserving inelastic capture.

Choose the balance from the available interval

Use force-acceleration equations when forces and instantaneous acceleration are central. Use work-energy when forces act through known displacements and time is absent.

Use impulse-momentum when force acts over time or a short interaction makes internal contact forces difficult to resolve. Method selection should eliminate missing variables rather than introduce them, and a free-body diagram remains useful for identifying which external actions enter any chosen balance.

State the body, system and neglected effects

Conservation is never justified by naming a formula alone.

Define which bodies lie inside the boundary and the interval being considered. Internal forces cancel in the momentum balance for that system, while external impulse changes total momentum. Weight may be negligible during a very short impact but important during a longer flight.

The approximation belongs to the interval and should be checked by comparing impulse scales.

Keep scalar energy and vector momentum distinct

Kinetic energy depends on speed squared and has no direction, while momentum depends linearly on velocity and is a vector. A sticking collision can conserve momentum while losing kinetic energy to deformation, heat and sound.

Two moving bodies can have zero total momentum yet substantial kinetic energy. Apply momentum separately in coordinate directions, then use the energy change as a diagnostic rather than silently assuming a second conservation law.

Extend the same reasoning to rotation

Torque plays the rotational role of force, angular impulse changes angular momentum, and torque through angular displacement performs work.

For a fixed axis, mass distribution enters through moment of inertia. Rolling without slipping links centre speed and angular speed, so total kinetic energy includes translation and rotation. Choose an angular-momentum point that removes inconvenient external moments, but state the point and reference frame explicitly.

In this chapter

What this chapter covers

  • 01

    Newton's second law

  • 02

    Friction and equations of motion

  • 03

    Impulse and momentum

  • 04

    Work and kinetic energy

  • 05

    Potential energy

  • 06

    Mechanical-energy balance

  • 07

    System momentum

  • 08

    Angular momentum

Worked example · free

Use height change to find speed

Q [6 marks]. AskSia-authored practice. A body starts from rest and descends 2.5 metres without friction. Find speed using g as 9.81 metres per second squared. The marks shown are an AskSia study allocation, not the University's marking scheme.
The three routes organise different information.The three routes organise different information. Force and time favour impulse, force and distance favour work-energy, and a short interaction with unknown internal forces favours momentum conservation.Choose a method from the known quantitiesForce + timeNewton / impulseForce + distancework-energyShort collisionmomentumall must agree when their assumptions overlap
The three routes organise different information. Force and time favour impulse, force and distance favour work-energy, and a short interaction with unknown internal forces favours momentum conservation.
  • 2Choose the body-Earth system.
  • 2Balance potential and kinetic energy.
  • 2Check the result's direction and scale.
Conservation gives mgh = one half m v squared. Mass cancels, so v is the square root of 2gh. Substitution gives the square root of 2 times 9.81 times 2.5, which is 7.00 metres per second. Path length is irrelevant because no frictional work is present.
Sia tip — Choose the system boundary before writing conservation, then state which external work or impulse is negligible.
Glossary

Key terms

Net Force
The vector sum of external forces on the chosen body.
Impulse
Force integrated over time and equal to momentum change.
Momentum
Mass multiplied by velocity.
Work
Force integrated along displacement.
Kinetic Energy
The energy associated with motion, equal to one half mass times speed squared.
Conservative Force
A force whose work can be represented by potential-energy change.
FAQ

Forces, Energy and Momentum in Dynamics FAQ

When is work-energy the best method?

Use it when initial and final speeds, heights or force work over a path are available and time is not required. It can eliminate acceleration and elapsed time, but non-conservative work such as friction must be included with the correct sign.

Can momentum be conserved when kinetic energy is lost?

Yes. During a short inelastic collision, external impulse may be negligible so system momentum is conserved, while deformation, sound and heat convert some kinetic energy into other forms. The two balances describe different physical quantities.

Why must I state the system boundary?

The boundary decides which forces are internal and cancel in a system momentum balance, which energy transfers cross the boundary, and whether an external impulse or work term can be neglected. Changing the system can change the valid conservation statement.

Study strategy

Exam move

Make a method selector with three prompts: force plus time, force plus distance, and short interaction between bodies. For each practice problem, predict which variables the selected method removes before calculating. Finish by checking the same event with another quantity, such as kinetic-energy change after a momentum solution or force direction after an energy solution.

Write the system boundary and time interval above every balance equation, then list only interactions that cross that boundary. For collision practice, solve momentum by components and calculate kinetic energy before and after without assuming it is conserved. For work-energy, draw the free-body diagram and mark which forces have displacement along their line of action.

Add rotational cases by keeping translation, rotation and rolling constraints in separate ledger rows before combining energies.

A+Everything unlocked
Unlocks this Bible + all 52 of your subjects at The University of Hong Kong, plus 1,000+ more Bibles across the AskSia library.
Sia - your ENGG1000 tutor, unlimited, worked the way the exam marks it
The full 4-page Bible + practice bank with worked solutions
Chrome extension - sync your LMS so Sia knows your deadlines
Bilingual EN / Chinese on every Bible and every Sia answer
$0.99 Trial
30-day money-back · cancel in one tap · how it works