ENGG1000 Chap.9 Particle Kinematics and Curved Motion
Particle Kinematics and Curved Motion
Motion variables are linked by rates
Velocity is the time rate of change of position, and acceleration is the time rate of change of velocity. Graph slopes express those derivatives, while signed areas recover displacement or velocity change.
Speed is only velocity magnitude, so direction change can create acceleration at constant speed.
Curved paths need two directions
Normal-tangential coordinates separate acceleration that changes speed from acceleration that changes direction. The tangential term is the speed derivative, and the normal term is speed squared divided by path radius, directed inward.
Relative velocity is vector subtraction in a common reference frame.
Map equations to the level of motion
Position, velocity and acceleration form a derivative chain. Differentiating moves downward from position to velocity to acceleration; integrating moves upward and requires initial conditions.
Dimensional analysis identifies the level: length, length per time and length per time squared cannot be substituted interchangeably.
At a turning point velocity can be zero while acceleration remains nonzero, so an instantaneously stopped particle is not automatically in equilibrium.
Read graphs through slope and signed area
The slope of a position-time graph gives velocity, and the slope of a velocity-time graph gives acceleration. Area under velocity gives displacement, while area under acceleration gives velocity change.
Portions below the time axis contribute negative signed area even though distance travelled keeps increasing. Marking zero and direction on the axes prevents a graph of decreasing positive velocity from being mistaken for negative velocity.
Use constant-acceleration formulas conditionally
The familiar algebraic relations apply only over an interval where acceleration is constant.
Select positive direction before assigning signs and use one equation containing the target with the available data. Check the result through a velocity-time area or average velocity when possible.
In projectile motion, horizontal and vertical components share time but have different accelerations, so combining speed magnitudes early destroys the directional information.
Resolve curved motion into tangent and inward normal
The tangential acceleration changes speed and the normal acceleration changes direction. Compute them separately and combine perpendicular components only at the end.
The local radius of curvature belongs to the point being analysed and need not be distance from a fixed global origin. For relative motion, subtract vectors expressed in one reference frame and verify that reversing observer and observed object reverses the result.
What this chapter covers
- 01
Position and displacement
- 02
Velocity and acceleration
- 03
Motion-graph slope
- 04
Motion-graph area
- 05
Constant acceleration
- 06
Relative velocity
- 07
Circular motion
- 08
Normal-tangential coordinates
Worked example · free
Connect a velocity graph to displacement
- 2Find graph slope.
- 2Find graph area.
- 2Check with average velocity.
Key terms
- Displacement
- The vector change in position.
- Velocity
- The time rate of change of position.
- Acceleration
- The time rate of change of velocity.
- Relative Velocity
- One object's velocity measured from another moving frame.
- Tangential Acceleration
- The component changing speed along a path.
- Normal Acceleration
- The inward component changing velocity direction on a curve.
Particle Kinematics and Curved Motion FAQ
Can acceleration exist at constant speed?
Yes. Velocity includes direction as well as magnitude. Uniform circular motion keeps speed constant while continuously changing direction, producing inward normal acceleration equal to speed squared divided by the radius.
How do I calculate relative velocity?
Express both velocities in the same coordinate frame, then subtract the observer's velocity from the object's velocity. The notation velocity of B relative to A means B minus A, and reversing the order reverses the result.
What does negative area on a velocity graph mean?
Area below the time axis contributes negative displacement because velocity is negative under the chosen coordinate convention. Distance travelled remains positive and requires adding the magnitudes of path segments rather than using the signed net area alone.
Exam move
Practise moving in both directions between equations and graphs. Given a position graph, describe velocity signs and turning points; given a velocity graph, find acceleration and signed displacement. For curved motion, draw tangent and inward normal unit vectors before inserting speed and radius values.
Use a three-row table for position, velocity and acceleration, recording the units, graph meaning and derivative or integral link in each row. Rebuild constant-acceleration results through both algebra and velocity-time area. For projectile questions, keep horizontal and vertical columns separate until the shared time is known.
In curved motion, predict whether speed or direction is changing before calculating the tangential and normal terms, then draw the resultant acceleration from those perpendicular components.