The University of Hong Kong · FACULTY OF ENGINEERING

ENGG1000 Chap.7 Free-Body Diagrams and Static Equilibrium

- one subject, every graph, every model, every mark
7 Chapters3-page Bible
Our own words - no uploaded lecturer files
Updated for this semester
Chapter 7 of 10 · ENGG1000

Free-Body Diagrams and Static Equilibrium

The diagram is the mechanical model

A free-body diagram isolates a body and replaces each support or contact with the forces and moments it can exert. Applied loads remain at their physical lines of action. Internal forces appear only after a cut.

Every later equation inherits the diagram's assumptions.

Three planar balances

A rigid body in planar equilibrium satisfies two force-component equations and one moment equation. Choosing a moment point through unknown reaction lines removes their moments.

The unknown count tests determinacy, while the restraint directions separately determine whether the body is stable against rigid motion.

Define the isolated body before drawing arrows

Draw a boundary around exactly one body or selected group. Every interaction crossing that boundary becomes an external force or couple on the free-body diagram; interactions wholly inside the chosen system do not appear.

This boundary rule determines whether a pin force, cable tension or contact normal is external.

Mixing forces from two different isolated bodies in one diagram produces equations that do not describe any physical system.

Translate supports into permitted reactions

A cable supplies tension along its line, a smooth contact supplies a normal reaction, a planar pin can supply two force components, and a fixed support can also supply a reaction moment. These are idealised constraints, not decorative symbols.

Include only the actions the support model can exert and keep applied loads at their lines of action. An invented reaction can make the unknown count misleading even if the algebra later balances.

Plan the equation order from geometry

Choose a moment centre through as many unknown reaction lines as possible, solve the remaining reaction, and then use force components.

This is an efficiency choice, not a new equilibrium law. Keep all loads, distances and signs visible so a solved reaction can be substituted into an independent balance.

A final zero sum of forces and moments provides a stronger check than repeating the same equation in rearranged form.

Test stability as well as equation count

Having three unknown reaction components in a planar problem does not guarantee a stable determinate body. Parallel reaction lines may allow translation, and concurrent reaction lines may fail to resist rotation.

Conversely, more than three independent unknowns indicate static indeterminacy and require deformation compatibility. Inspect the directions and locations of restraints after counting unknowns so the mechanical conclusion follows geometry as well as arithmetic.

In this chapter

What this chapter covers

  • 01

    Body isolation

  • 02

    Pin and roller reactions

  • 03

    Fixed-support reactions

  • 04

    Distributed-load resultants

  • 05

    Force equilibrium

  • 06

    Moment equilibrium

  • 07

    Stability and determinacy

Worked example · free

Find reactions under an off-centre load

Q [8 marks]. AskSia-authored practice. A 5 m simply supported beam carries 15 kN downward 2 m from the pin. Find vertical reactions. The marks shown are an AskSia study allocation, not the University's marking scheme.
The beam has been isolated from its supports.The beam has been isolated from its supports. The pin contributes horizontal and vertical reactions, the roller contributes one normal reaction, and the applied load remains at its actual line of action.Isolation replaces supports with reactions400 NAyAxBypin at A, roller at B
The beam has been isolated from its supports. The pin contributes horizontal and vertical reactions, the roller contributes one normal reaction, and the applied load remains at its actual line of action.
  • 3Take moments about the pin.
  • 3Apply vertical equilibrium.
  • 2Check about the roller.
Moments about the pin give By times 5 minus 15 times 2 equals zero, so By is 6 kN. Vertical equilibrium gives Ay plus 6 minus 15 equals zero, so Ay is 9 kN. About the roller, 15 times 3 minus 9 times 5 equals zero, confirming equilibrium.
Sia tip — Choose a moment point through the largest number of unknown reaction lines.
Glossary

Key terms

Free-Body Diagram
An isolated-body drawing showing each external interaction once.
Reaction
A support force or moment resisting a restrained motion.
Equilibrium
A state with zero resultant force and zero resultant moment.
Distributed Load
A load spread continuously along a length or area.
Static Determinacy
A condition in which equilibrium equations determine all unknown forces.
Mechanism
An arrangement permitting rigid motion under the stated restraints.
FAQ

Free-Body Diagrams and Static Equilibrium FAQ

What reactions does a pin support provide?

In a planar model, a pin prevents translation in two independent directions and therefore supplies horizontal and vertical reaction components. It permits rotation, so it does not supply a reaction couple moment.

Where does a triangular distributed load act?

Its equivalent force equals the triangular area and acts through the centroid, one third of the base length from the larger-intensity end. Placing the force at midspan preserves total force but produces the wrong moment.

Does three unknowns always mean a stable planar support system?

No. Three equilibrium equations can solve three independent unknowns only after the support geometry is stable. Parallel or concurrent reaction directions may leave a rigid-body motion possible even when the number of unknown components equals three.

Study strategy

Exam move

Spend more time drawing than calculating. For each support, state the motion it prevents and draw only the matching reaction. Replace distributed loads with equivalent forces at their centroids, then choose a moment point that removes unknowns. After solving, check a second moment point so the verification does not repeat the original equation.

Practise drawing the same physical setup with two different system boundaries and explain why some contact forces become internal. Before solving, count unknowns, inspect restraint directions and predict whether the system is stable and determinate. Maintain a support-symbol reference sheet, but justify every arrow by the motion it prevents.

Redraw any incorrect solution from a blank page rather than editing arrows in place, because a clean boundary is part of the model.

A+Everything unlocked
Unlocks this Bible + all 52 of your subjects at The University of Hong Kong, plus 1,000+ more Bibles across the AskSia library.
Sia - your ENGG1000 tutor, unlimited, worked the way the exam marks it
The full 3-page Bible + practice bank with worked solutions
Chrome extension - sync your LMS so Sia knows your deadlines
Bilingual EN / Chinese on every Bible and every Sia answer
$0.99 Trial
30-day money-back · cancel in one tap · how it works