The Hong Kong Polytechnic University · FACULTY OF ENGINEERING

AAE5210 Chap.4 Ideal Nozzle Flow and Choking

- one subject, every graph, every model, every mark
7 Chapters5-page Bible
Our own words - no uploaded lecturer files
Updated for this semester
Chapter 4 of 5 · AAE5210

Ideal Nozzle Flow and Choking

The nozzle converts stored energy into directed motion

Gas in the chamber is described by stagnation pressure and temperature when velocity is small. Through an ideal adiabatic nozzle, stagnation enthalpy remains constant while static enthalpy falls and kinetic energy rises. Static pressure and temperature therefore decrease as the gas accelerates.

Keeping stagnation and static quantities separate prevents chamber values from being substituted into an exit relation or vice versa.

Area has opposite effects below and above Mach one

The quasi-one-dimensional area-velocity relation links a fractional area change to a fractional speed change through Mach number.

A converging passage accelerates subsonic flow, while a divergent passage accelerates supersonic flow. At Mach one the coefficient changes sign and the sonic section forms the throat of a smooth converging-diverging nozzle.

Geometry alone does not guarantee supersonic flow; the back-pressure history must create the choked state and appropriate downstream solution.

Choking fixes the throat mass flux

When the pressure ratio is low enough, the throat reaches Mach one. The ideal mass flow is then controlled by upstream stagnation pressure and temperature, throat area, gas constant and specific-heat ratio.

Further lowering back pressure does not make the throat Mach number exceed one. It changes the divergent-section expansion, shock structure or exit state while the upstream choked mass flux remains fixed under the ideal model.

Use station labels as the calculation framework

Write chamber zero, throat star and exit e beside every property. First test whether choking is supported.

Then use sonic ratios at the throat, area ratio for the supersonic branch and energy or isentropic relations for the exit state. The method turns a long collection of equations into a sequence of physical decisions.

In this chapter

What this chapter covers

  • 01

    Stagnation and static flow quantities

  • 02

    Adiabatic energy conversion in a nozzle

  • 03

    Mach number and speed of sound

  • 04

    Area-velocity relation below and above Mach one

  • 05

    Critical sonic ratios at the throat

  • 06

    Choked mass-flow relation

  • 07

    Converging-diverging nozzle station method

Worked example · free

Recover the throat static state from chamber conditions

Q [8 marks]. AskSia-authored practice. A calorically perfect gas has gamma 1.32, chamber stagnation temperature 3,000 K and chamber stagnation pressure 2.8 MPa. Find ideal throat temperature and pressure after choking. The marks shown are an AskSia study allocation, not the University's marking scheme.
The throat changes the sign of the area response.The throat changes the sign of the area response. Velocity rises and pressure falls through both sections, but convergence accelerates subsonic flow while divergence accelerates supersonic flow.sonic throatsubsonicsupersonicvelocitypressure
The throat changes the sign of the area response. Velocity rises and pressure falls through both sections, but convergence accelerates subsonic flow while divergence accelerates supersonic flow.
  • 2Write the critical temperature ratio at Mach one.
  • 3Write and evaluate the critical pressure ratio.
  • 3Apply both ratios to the chamber stagnation state and interpret the change.
The critical temperature ratio is 2/(gamma+1) = 2/2.32 = 0.8621, so throat temperature is 2,586 K. The pressure ratio is [2/(gamma+1)] raised to gamma/(gamma-1), or 0.8621 raised to 4.125 = 0.5422. Throat pressure is therefore 1.518 MPa. Static temperature and pressure are below stagnation values because chamber enthalpy has been converted into directed kinetic energy by the sonic throat.
Sia tip — The chamber quantities are stagnation values. The star values are local static quantities at Mach one.
Glossary

Key terms

Stagnation Temperature
The temperature a flow would reach if brought to rest adiabatically without losses, directly related to total enthalpy.
Static Pressure
The local thermodynamic pressure measured in the frame moving with the flow rather than the stagnation pressure.
Mach Number
Local flow speed divided by local speed of sound.
Throat
The minimum-area nozzle section, which becomes the sonic section when the flow is choked.
Choking
The state where throat Mach number reaches one and mass flow no longer rises with further back-pressure reduction under the ideal model.
Area-velocity Relation
The differential relation showing that convergence accelerates subsonic flow while divergence accelerates supersonic flow.
FAQ

Ideal Nozzle Flow and Choking FAQ

Why does a divergent nozzle accelerate supersonic flow?

In the area-velocity relation, the sign changes at Mach one. Below Mach one, increasing area slows the flow. Above Mach one, increasing area accelerates it while static pressure and temperature fall. A divergent shape only produces that branch when the flow has first choked and the back-pressure condition supports it.

What changes after a nozzle becomes choked?

The ideal throat reaches Mach one and mass flow is fixed by upstream stagnation conditions, gas properties and throat area. Further lowering back pressure changes the downstream expansion and possible shocks, not the throat Mach number. Raising chamber pressure or throat area can still increase mass flow.

Why must I distinguish stagnation and static properties?

Stagnation values represent the state after reversible adiabatic deceleration to zero speed, while static values describe the moving gas locally. The difference accounts for kinetic energy. Confusing them can put chamber temperature at the exit or use local pressure where the choked-flow relation requires stagnation pressure.

Study strategy

Exam move

Draw one converging-diverging nozzle and label chamber zero, throat star, exit e and ambient a. Use that sketch for every calculation. First write whether the source values are stagnation or static. Second decide whether the pressure ratio supports choking. Third calculate the sonic throat state or mass flux. Only then select the subsonic or supersonic area-ratio branch for the downstream state.

Re-derive the direction of the area-velocity relation from its sign rather than memorising the picture: convergence accelerates below Mach one, divergence accelerates above Mach one, and the smooth transition occurs at the minimum area.

Practise one problem in which back pressure is reduced while chamber state and throat area remain fixed; explain why throat mass flow stops increasing after choking even though the divergent-section pattern can still change. For each numerical answer, compare static values with stagnation values and check that energy conversion gives the expected direction.

Finish by listing the idealisations: steady, one-dimensional, adiabatic, isentropic flow with constant gas properties and negligible inlet velocity.

A+Everything unlocked
Unlocks this Bible + all 24 of your subjects at The Hong Kong Polytechnic University, plus 1,000+ more Bibles across the AskSia library.
Sia - your AAE5210 tutor, unlimited, worked the way the exam marks it
The full 5-page Bible + practice bank with worked solutions
Chrome extension - sync your LMS so Sia knows your deadlines
Bilingual EN / Chinese on every Bible and every Sia answer
$0.99 Trial
30-day money-back · cancel in one tap · how it works