The Hong Kong Polytechnic University · FACULTY OF ENGINEERING

AAE5210 Chap.2 Orbital Motion and Mission Delta-V

- one subject, every graph, every model, every mark
7 Chapters5-page Bible
Our own words - no uploaded lecturer files
Updated for this semester
Chapter 2 of 5 · AAE5210

Orbital Motion and Mission Delta-V

Gravity supplies the central acceleration

Orbital motion is continuous free fall around a central body. Newtonian gravitation and radial acceleration produce the circular-speed relation, while conservation of specific mechanical energy extends the analysis to elliptical and escape trajectories. Radius is measured from the centre of the body, not from its surface.

That geometric distinction and a coherent unit system are the first two checks in every calculation.

Energy organises the orbit families

Specific orbital energy combines kinetic and gravitational potential terms. It is negative for bound elliptical motion, zero at ideal escape and positive for an unbound hyperbolic path. The vis-viva relation gives speed at any radius once the semimajor axis is known.

Circular speed and local escape speed are special cases, with escape speed equal to the square root of two times circular speed at the same radius.

Transfers require changes at defined points

A Hohmann transfer between coplanar circular orbits uses two tangent impulses. The first changes the circular orbit into an ellipse, and the second circularises at the destination.

Each delta-v is the difference between two speeds at the same radius. Mixing a departure speed with an arrival speed from a different radius produces a plausible-looking but physically meaningless subtraction.

Burn location matters

The Oberth effect states that a given velocity increment creates a larger change in orbital energy when applied at higher speed.

This is why impulsive burns near periapsis can be valuable. The result does not create free velocity; it follows from the cross term in the kinetic-energy change. A complete mission budget then adds required impulses and keeps gravity, drag, steering and operational reserves visible rather than burying them inside one unexplained number.

In this chapter

What this chapter covers

  • 01

    Newtonian gravitation and circular motion

  • 02

    Specific orbital energy and orbit classification

  • 03

    Circular speed and local escape speed

  • 04

    The vis-viva relation

  • 05

    Two-impulse Hohmann transfer method

  • 06

    Oberth effect and burn location

  • 07

    Mission delta-v budgets and named losses

Worked example · free

Calculate a two-impulse transfer between circular orbits

Q [12 marks]. AskSia-authored practice. Around a body with gravitational parameter 398,600 km3/s2, transfer from a circular orbit of radius 7,200 km to one of radius 14,000 km. Find both impulses and total ideal delta-v. The marks shown are an AskSia study allocation, not the University's marking scheme.
Total energy separates bound and escape trajectories.Total energy separates bound and escape trajectories. Circular and elliptical paths lie below zero energy, the parabola sits at zero, and the hyperbola remains positive.bodycircleellipseparabolahyperbolaE > 0E < 0energy
Total energy separates bound and escape trajectories. Circular and elliptical paths lie below zero energy, the parabola sits at zero, and the hyperbola remains positive.
  • 4Find the two circular speeds and the transfer ellipse semimajor axis.
  • 4Use vis-viva for transfer speed at periapsis and apoapsis.
  • 4Subtract speeds at common radii and add the impulse magnitudes.
The circular speeds are sqrt(398600/7200) = 7.441 km/s and sqrt(398600/14000) = 5.336 km/s. The transfer semimajor axis is 10,600 km. Vis-viva gives transfer speed 8.522 km/s at 7,200 km and 4.382 km/s at 14,000 km. The first impulse is 8.522 - 7.441 = 1.081 km/s. The second is 5.336 - 4.382 = 0.954 km/s. Total ideal delta-v is 2.035 km/s.
Sia tip — Every impulse is a difference between two velocities evaluated at the same position. Label the radius beside each speed.
Glossary

Key terms

Gravitational Parameter
The product of the gravitational constant and central-body mass, commonly denoted mu and used in orbital relations.
Specific Orbital Energy
Orbital mechanical energy per unit mass, combining kinetic energy and gravitational potential energy.
Semimajor Axis
Half the long axis of an ellipse and the geometric quantity that fixes its specific orbital energy.
Vis-viva Equation
The relation connecting orbital speed, current radius, central-body gravitational parameter and semimajor axis.
Hohmann Transfer
A two-impulse tangent elliptical transfer between coplanar circular orbits.
Oberth Effect
The larger orbital-energy change obtained when the same velocity increment is applied at higher initial speed.
FAQ

Orbital Motion and Mission Delta-V FAQ

Should I use altitude or orbital radius?

Use radius measured from the centre of the central body in gravitational and vis-viva relations. If a problem gives altitude above a surface, add the body radius first. Using altitude directly usually overstates speed and can remain numerically plausible enough to escape a casual check.

Why is escape speed larger than circular speed?

A circular orbit needs enough tangential speed to keep falling around the body at one radius. Escape requires zero remaining speed only at infinite distance, so it must also supply the energy needed to climb out of the gravitational potential well. At one radius, the ratio is exactly square root of two.

What is the safest Hohmann transfer workflow?

Draw the initial circle, tangent transfer ellipse and final circle. Find both circular speeds, then both transfer speeds with vis-viva. Form each impulse from speeds at the same radius, take the manoeuvre magnitude, and add the two impulses. State that the model is coplanar and impulsive.

Study strategy

Exam move

Practise orbital mechanics as a labelled energy map rather than a formula list. Begin every problem with the central body, gravitational parameter, current radius, semimajor axis and whether the path is circular, elliptical or escaping. Re-derive circular speed by equating gravitational and radial acceleration, then obtain escape speed from zero total specific energy.

This makes the square-root-of-two relation memorable without isolated recall. For transfer problems, draw the two circular orbits and the tangent ellipse, label periapsis and apoapsis, and place each speed at its radius before subtracting. Work one outward transfer and one inward transfer so the signs and burn directions do not become a memorised picture.

Run three checks after every result: a higher circular orbit should have lower circular speed, transfer speed at the lower radius should exceed the local circular speed for an outward transfer, and all quantities must use one length unit. Finally, explain the Oberth effect in words and from the kinetic-energy change, then identify which real losses an impulsive two-body calculation has omitted.

A+Everything unlocked
Unlocks this Bible + all 24 of your subjects at The Hong Kong Polytechnic University, plus 1,000+ more Bibles across the AskSia library.
Sia - your AAE5210 tutor, unlimited, worked the way the exam marks it
The full 5-page Bible + practice bank with worked solutions
Chrome extension - sync your LMS so Sia knows your deadlines
Bilingual EN / Chinese on every Bible and every Sia answer
$0.99 Trial
30-day money-back · cancel in one tap · how it works