University of Birmingham · FACULTY OF ENGINEERING

40366 Chap.7 Crystal Structures and Atomic Packing

- one subject, every graph, every model, every mark
8 Chapters4-page Bible
Our own words - no uploaded lecturer files
Updated for this semester
Chapter 7 of 12 · 40366

Crystal Structures and Atomic Packing

Patterns, lattices and cells

The crystallography lab starts with flat repeating patterns. Points with identical surroundings form a lattice, lines joining them are lattice vectors, and every lattice vector can be built from a pair of primitive vectors in two dimensions or three in a solid.

A unit cell is any area or volume that fills space by translation alone, and the lab shows that a primitive cell with a single lattice point can hide the symmetry a larger cell makes obvious.

Packing spheres

Treating atoms as touching hard spheres explains why close packing is favoured: the denser the packing, the lower the energy.

Close-packed planes can be stacked in two simple ways, giving hexagonal close packing and cubic close packing, and in three dimensions there are fourteen Bravais lattices in six crystal families.

Students glue polypropylene balls on a printed jig to build simple cubic, body-centred cubic and face-centred cubic cells, and keep the models for later in the year.

Ionic structures and defects

A second task uses ball and stick kits to build sodium chloride, fluorite, sphalerite and diamond structures, then an edge dislocation made from simple cubic layers with an extra half-plane.

Rotating the models to find unit cells and planes of atoms is the core skill.

In this chapter

What this chapter covers

  • 01

    Lattice points, lattice vectors and primitive vectors

  • 02

    Unit cells and primitive cells

  • 03

    Two-dimensional and three-dimensional Bravais lattices

  • 04

    Hard-sphere packing and packing density

  • 05

    Hexagonal and cubic close packing

  • 06

    Simple, body-centred and face-centred cubic cells

  • 07

    Ionic structures built from kits

  • 08

    The edge dislocation

Worked example · free

Atomic radius from an FCC cell edge

Q [4 marks]. AskSia-authored practice. An AskSia metal has a face-centred cubic cell with edge a = 0.400 nm. Find its atomic radius, then find the edge of a body-centred cubic cell made from the same atoms. The marks shown are an AskSia revision weighting and are not official University marks.
Figure 7.1.Figure 7.1. One face of a face-centred cubic cell with edge a = 0.400 nm. The centre atom touches the four corner atoms along the face diagonal, so four radii equal a√2 and r = 0.141 nm.a = 0.400 nmFace diagonal4r = a√2r = 0.141 nmCorner atoms clipped
Figure 7.1. One face of a face-centred cubic cell with edge a = 0.400 nm. The centre atom touches the four corner atoms along the face diagonal, so four radii equal a√2 and r = 0.141 nm.
  • 1In the face-centred cell the atoms touch along the face diagonal, so 4r = a√2.
  • 1r = 0.400 × 1.414 ÷ 4 = 0.141 nm.
  • 1In a body-centred cell the atoms touch along the body diagonal, so 4r = a√3 and a = 4r ÷ √3.
  • 1a = 4 × 0.1414 ÷ 1.732 = 0.327 nm.
The radius is 0.141 nm. The same atoms in a body-centred cubic cell would give an edge of about 0.327 nm, shorter than 0.400 nm because the touching line is now the body diagonal.
Sia tip — Name the direction along which the spheres touch before writing any radius relation.
Glossary

Key terms

Lattice Point
Position in a repeating pattern whose surroundings are identical to those of every other such position.
Primitive Unit Cell
Smallest repeating cell, containing exactly one lattice point, which can obscure the pattern's full symmetry.
Coordination Number
Count of nearest neighbours touching a given atom: six in simple cubic, eight in body-centred and twelve in face-centred cubic.
Close-Packed Plane
Layer of spheres arranged so each touches six others in the plane, the densest possible flat arrangement.
Edge Dislocation
Line defect formed where an extra half-plane of atoms ends inside a crystal, distorting the bonds around its edge.
FAQ

Crystal Structures and Atomic Packing FAQ

What is the difference between a lattice and a crystal structure?

A lattice is the set of equivalent points that captures the repetition, while the structure adds what actually sits at or around each point, such as one atom, two ions or a molecule. The same lattice can therefore carry many different crystal structures.

Why are there many possible unit cells for one crystal?

Any area or volume that fills space by translation alone qualifies as a unit cell, so many shapes work. Crystallographers usually pick the one that shows the symmetry most clearly, even when it is larger than the smallest possible primitive cell.

How do hexagonal and cubic close packing differ?

Both start from identical close-packed layers nested into each other's hollows. Hexagonal packing repeats every second layer, A B A B, while cubic packing uses a third position, A B C A B C. Both fill the same fraction of space.

Why do atoms in metals tend to pack closely?

Atoms are held together by attractive forces, so arrangements that bring more neighbours into contact lower the energy. Treating atoms as hard spheres, the densest arrangements are the close-packed ones, which is why face-centred cubic and hexagonal structures are so common among metals.

What does the edge dislocation model show?

It shows an extra half-plane of atoms pushed into an otherwise regular crystal. Bonds near the end of that half-plane are compressed on one side and stretched on the other, and the movement of such defects explains why metals deform plastically at modest stresses.

Study strategy

Assessment move

Work with the models in your hands. For each cubic cell, find the direction in which neighbouring spheres touch, write the radius relation, and count nearest neighbours around one central atom. Then compare two stacking sequences by laying out layers and labelling them A, B and C.

Practise a radius or lattice parameter calculation for each cell type, checking units in nanometres throughout, and sketch each ionic structure from two viewpoints. Finally, explain in two sentences what the edge dislocation model adds to a perfect crystal and why that matters for the tensile tests.

Revisit the glued models later in the year when Miller planes and structure types are taught, and photograph them now from several directions so the angles are easy to recall.

Working through Crystal Structures and Atomic Packing in 40366? Sia is AskSia’s AI Engineering tutor — ask any 40366 Crystal Structures and Atomic Packing question and get a clear, step-by-step explanation grounded in how 40366 is taught and assessed. Read this chapter free, then take your hardest questions to Sia.

A+Everything unlocked
Unlocks this Bible + all 17 of your subjects at University of Birmingham, plus 1,000+ more Bibles across the AskSia library.
Sia - your 40366 tutor, unlimited, worked the way the exam marks it
The full 4-page Bible + practice bank with worked solutions
Chrome extension - sync your LMS so Sia knows your deadlines
Bilingual EN / Chinese on every Bible and every Sia answer
$0.99 Trial
30-day money-back · cancel in one tap · how it works
40366 · LC Practical and Design Skills for Materials Science/Aerospace Engineering - independent study guide on the AskSia Library. More University of Birmingham subjects · Microeconomics across all universities