CIVL13001 Chap.8 Beam Curvature and Deflection
Beam Curvature and Deflection
Beam Curvature and Deflection connects the bending-moment field to the elastic curve. Dividing moment by flexural stiffness gives curvature under the beam assumptions, then integration produces rotation and displacement. Each integration constant is determined by a physical support or continuity condition.
A valid curve passes through restrained supports, meets fixed ends with zero slope and bends consistently with the moment sign convention.
The differential equation begins with a moment expression derived from equilibrium, not a memorised deflection coefficient. Under the small-slope elastic model, one integration produces rotation and a second produces displacement.
Fixed ends restrain both quantities, while pins and rollers restrain displacement but permit rotation. Piecewise loading or stiffness introduces additional constants and interface conditions. Ordinary connected regions match displacement and rotation, while hinges or releases change the admissible conditions.
Dimensional checks follow the integrations from inverse-length curvature to dimensionless rotation and length displacement. Scaling with load, span and EI supplies a final test of the computed response.
Support conditions describe physical motion. At an ideal fixed end, displacement and rotation are both zero. At a simple support, vertical displacement is zero but rotation is generally not.
At an unloaded free end, the internal moment and shear are zero, while displacement and rotation remain unknown outcomes. Writing those statements before integration prevents convenient but invalid constants from being selected after the algebra is complete.
Piecewise analysis is required when the bending-moment expression or flexural stiffness changes.
Each region brings two constants, so the condition ledger must grow with the number of regions. At an ordinary internal point, displacement and rotation remain continuous. Moment and shear follow the applied force and couple rules. A stiffness step changes curvature because the same moment is divided by a different EI, but it does not create a physical gap or kink in a continuous beam.
An internal hinge instead enforces zero moment and can alter the rotation relation.
Deflection formulas are sensitive to span. A cantilever tip displacement under an end load scales with the cube of length, while rotation scales with length squared. These powers are valuable checks when a numerical answer seems unreasonable. Doubling modulus or second moment halves the response for the same load and geometry.
The final curve should be sketched against the original supports and compared with the moment sign. This visual audit can reject a solution that passes through a support, rotates at a fixed wall or bends opposite to the calculated curvature.
What this chapter covers
- 01
Moment-curvature
- 02
Flexural stiffness
- 03
Small-slope approximation
- 04
Rotation
- 05
Deflection
- 06
Boundary conditions
- 07
Piecewise continuity
Worked example · free
Deflect a cantilever under an end load
- 3Integrate EI y double prime = -P(L-x) once and apply zero fixed-end rotation.
- 3Integrate again and apply zero fixed-end displacement.
- 2At x = L, report rotation as -PL squared over 2EI and deflection as -PL cubed over 3EI.
Key terms
- Curvature
- The rate at which a line changes direction, approximated by the second deflection derivative for small slopes.
- Flexural stiffness
- The product of Young's modulus and second moment of area that resists beam curvature.
- Boundary condition
- A prescribed displacement, rotation, force or moment used to determine a beam solution.
- Compatibility
- The requirement that adjoining beam regions share the displacement and rotation permitted by their physical connection. At an ordinary continuous section both quantities match, whereas an internal hinge can release the rotational relation while preserving contact.
- Elastic curve
- The displaced shape of the beam centreline predicted by the small-slope bending model. Its slope represents rotation and its second derivative represents curvature, so its geometry must agree with supports, continuity and the bending-moment sign.
Beam Curvature and Deflection FAQ
Why are two boundary conditions needed?
Double integration introduces two constants for each uniform region. Two independent physical conditions, such as fixed-end rotation and displacement or zero displacement at two supports, determine them.
Does zero moment mean zero deflection?
No. Zero moment means zero curvature under the simple constant-EI elastic relation, so the beam is locally straight there. It can still be displaced or rotated because earlier curvature and support motion affect its position.
How do I check a deflected shape?
Confirm restrained supports have the prescribed displacement, fixed ends have zero rotation, neighbouring regions meet with the required continuity, and curvature direction agrees with the bending-moment convention.
What changes when stiffness varies?
Use the local value of EI in each region before integrating. A reduction in stiffness increases curvature for the same bending moment, but it does not by itself create a gap or hinge. Match displacement and rotation at an ordinary stiffness interface, retain the correct equilibrium relations for moment and shear, and solve the enlarged set of constants together.
The resulting curve may change curvature abruptly while remaining connected and smooth in slope.
Exam move
Begin deflection questions with the bending-moment expression and a sketch of the expected elastic curve. Write the coordinate origin, positive displacement direction and support conditions before integrating. Divide by EI consistently, integrate once to rotation and once more to displacement, and apply conditions immediately rather than carrying unexplained constants.
For simply supported beams, use zero displacement at both supports. For cantilevers, use zero displacement and zero rotation at the fixed end. Add piecewise problems gradually, matching displacement and rotation where ordinary beam regions meet while respecting any hinge or stiffness change. Check dimensions after each integration: curvature has inverse-length units, rotation is dimensionless and displacement has length units.
Use scaling to test formulas, especially the strong dependence on span length. Keep an error list for moment sign, missing EI, wrong support condition, lost integration power and failed continuity. Finish every calculation with a deformed-shape sketch that the support could physically permit. Build a boundary-condition library from physical motions rather than memorised equations.
Sketch a fixed end, pin, roller, free end and internal hinge, then write what each does to displacement, rotation, moment and shear. Solve one cantilever and one simply supported beam with the same loading so the conditions, not the integration skill, explain the different constants. Before substituting numbers, test proportionality with load, stiffness and length.
For a cantilever end load, doubling span should increase tip deflection eightfold; a formula that fails this test has lost a power. In piecewise problems, create a condition ledger with one row per support or interface and one column per unknown constant. Mark each independent equation once to avoid duplication. Plot the resulting expressions at several x values and verify that adjacent regions meet as required.
If a stiffness step exists, expect curvature to change while displacement and rotation remain continuous. If an internal hinge exists, impose zero moment and consider the permitted rotation relation carefully. Re-derive one standard result from the moment function each week instead of memorising a coefficient. This keeps sign, coordinate and boundary logic connected to the physical beam.