The University of Manchester · FACULTY OF ENVIRONMENTAL SCIENCE

EART60071 Chap.7 Atmospheric Stability and Gaussian Plume Dispersion

- one subject, every graph, every model, every mark
6 Chapters5-page Bible
Our own words - no uploaded lecturer files
Updated for this semester
Chapter 7 of 10 · EART60071

Atmospheric Stability and Gaussian Plume Dispersion

Atmospheric Stability and Gaussian Plume Dispersion connects the lapse rates of the previous chapters to air quality. A parcel cooling more slowly than its surroundings ends up warmer and keeps rising, so the air is unstable; one cooling faster sinks back, so the air is stable; equal rates give neutral air. Those classes produce the looping, coning and fanning plumes seen from industrial stacks.

The Gaussian plume model, used in permit applications, simplifies the advection-diffusion equation by dropping crosswind transport, time dependence and along-wind mixing, leaving an analytical solution built from Gaussian factors whose widths depend on stability. The chapter also explains why humidity changes particulate mass in the model without changing its mixing.

The practical asks you to make controlled comparisons with this model, and the chapter shows how to name the mechanism behind each one.

In this chapter

What this chapter covers

  • 01

    Buoyancy from a parcel-environment temperature difference

  • 02

    Stable, neutral and unstable air

  • 03

    Looping, coning and fanning plumes

  • 04

    Simplifying the advection-diffusion equation

  • 05

    Gaussian widths and stability

  • 06

    Humidity and particulate mass in the plume practical

Worked example · free

Reading the crosswind bell of an 80 m plume

Q [4 marks]. At one downwind distance a time-averaged plume has a crosswind standard deviation of 80 m. Using the crosswind factor exp(−y2/2σy2), show that the concentration is half the centre value about 94 m from the centre line and find the fraction left at 160 m. The marks shown are AskSia practice weighting, not a University of Manchester scheme.
The crosswind factor of a time-averaged Gaussian plume with σ y = 80 m, plotted as a fraction of the centre-line value.The crosswind factor of a time-averaged Gaussian plume with σ y = 80 m, plotted as a fraction of the centre-line value. Concentration halves 94 m either side of the centre line and falls to 0.135 of it at 160 m, two standard deviations out.half peak: 94 m0.135 at 160 mplume centre line-3000300crosswind distance y (m)
The crosswind factor of a time-averaged Gaussian plume with σy = 80 m, plotted as a fraction of the centre-line value. Concentration halves 94 m either side of the centre line and falls to 0.135 of it at 160 m, two standard deviations out.
  • 2At y = 94 m the exponent is −942/(2 × 802) = −0.690, and e−0.690 = 0.50, so 94 m is the half-concentration distance.
  • 1At y = 160 m, two standard deviations, the exponent is −2 and the factor is e−2 = 0.135.
  • 1A wider σy from less stable air would push both distances outward in proportion.
The crosswind concentration halves 94 m from the centre line and falls to 0.135 of the centre value at 160 m; both distances scale with σy, which grows as the air becomes more unstable. Practice weighting by AskSia, not a University scheme.
Sia tip — Remember the anchors: half the peak at 1.18 standard deviations and 0.135 at two, so a plotted profile can be checked without a calculator.
Glossary

Key terms

Atmospheric stability
The tendency of the air to suppress or amplify vertical displacement, set by the parcel and environmental lapse rates.
Fanning plume
A plume in stable air that stays thin vertically while spreading horizontally.
Looping plume
A plume in unstable air that thermals carry up and down as it moves downwind.
Advection-diffusion equation
The equation governing transport of a pollutant by the wind together with its mixing.
FAQ

Atmospheric Stability and Gaussian Plume Dispersion FAQ

How do I decide whether the air is stable?

Compare the environmental lapse rate with the parcel's. If the environment cools more slowly than the parcel, a lifted parcel ends up colder and sinks back: stable. If they cool at the same rate the air is neutral. If the environment cools faster, the lifted parcel is warmer and keeps rising: unstable. Always compare at the same height.

What does the Gaussian plume model leave out?

It neglects crosswind transport, keeping transport only along the wind; it neglects time dependence, so meandering is replaced by a time average; and it neglects mixing along the wind, assumed to be dominated by transport. The looping of an unstable plume is therefore not simulated directly, only its time-averaged effect through wider Gaussian profiles.

Why does humidity change PM in the plume practical but not the plume shape?

Dispersion in the model depends on the stability-dependent widths, so humidity does not affect mixing. It does affect the particles: hygroscopic particulate takes up water and grows, and because mass scales with the cube of diameter, the reported particulate mass loading rises downwind without any extra emission.

Why is the Gaussian plume model so cheap to run?

It does not integrate differential equations through time. After its simplifications the advection-diffusion equation has an analytical solution, so the program only evaluates a known formula at each point of a three-dimensional grid. That is why the practical can use interpreted Python, which is slower than compiled code, without long waits for each run.

Study strategy

Exam move

Revise stability and dispersion together, because the plume questions are stability questions in disguise. Draw temperature against height for an environment and a dry parcel, lift the parcel a few hundred metres, compute both temperatures and name the class, then repeat with three or four different environmental rates until the sign logic is automatic.

Next, attach the plume shapes to the classes and practise explaining each from thermals and buoyancy rather than memorising labels. For the model, write the three simplifications of the advection-diffusion equation, then practise bell-curve arithmetic with the crosswind factor: half-widths, edge fractions and the effect of a wider standard deviation.

Finally, take each practical comparison in turn, from wind variability and multiple stacks to the annual stability cycle and humid particulate, and write the input that changed and the mechanism that explains the new map.

A+Everything unlocked
Unlocks this Bible + all 41 of your subjects at The University of Manchester, plus 1,000+ more Bibles across the AskSia library.
Sia - your EART60071 tutor, unlimited, worked the way the exam marks it
The full 5-page Bible + practice bank with worked solutions
Chrome extension - sync your LMS so Sia knows your deadlines
Bilingual EN / Chinese on every Bible and every Sia answer
$0.99 Trial
30-day money-back · cancel in one tap · how it works