The University of Manchester · FACULTY OF ENVIRONMENTAL SCIENCE

EART60071 Chap.6 Parcel Models and Cloud Droplet Activation

- one subject, every graph, every model, every mark
6 Chapters3-page Bible
Our own words - no uploaded lecturer files
Updated for this semester
Chapter 6 of 10 · EART60071

Parcel Models and Cloud Droplet Activation

Parcel Models and Cloud Droplet Activation explains the Fortran parcel model used in the second practical and how to read its experiments. The model follows an adiabatic parcel upward, linking a pressure tendency to cooling, saturation over flat water to the higher equilibrium over curved drops, and Maxwell's growth rate to the liquid and vapour budgets that keep total water constant.

Because billions of particles cannot each have an equation, sizes are grouped into bins and initialised from log-normal modes. The Kelvin equation explains why very small particles rarely become cloud drops, and the experiments on updraft speed, initial humidity and added sea salt show how droplet number responds, which is the basis of the marine cloud brightening proposal.

Because the assessment may ask you to interpret these experiments, the chapter keeps each comparison tied to the one setting that changed and to the cloud quantity that responded.

In this chapter

What this chapter covers

  • 01

    The adiabatic parcel and its assumptions

  • 02

    Pressure, cooling and latent heating

  • 03

    The Kelvin equation and curvature

  • 04

    Maxwell growth and the water budget

  • 05

    Size bins and log-normal aerosol modes

  • 06

    Updraft, humidity and sea-salt experiments

Worked example · free

Supersaturation needed by small and large drops

Q [4 marks]. At 290 K the Kelvin ratio is ev/e0 = exp(1.12 × 10−9/r) with r in metres. Find the supersaturation, in percent, needed to keep a 50 nm drop and a 0.5 µm drop in equilibrium, and say which could grow in air that reaches 1% supersaturation. The marks shown are AskSia practice weighting, not a University of Manchester scheme.
The Kelvin ratio of equilibrium vapour pressure over a curved drop to that over flat water, at 290 K, against drop radius.The Kelvin ratio of equilibrium vapour pressure over a curved drop to that over flat water, at 290 K, against drop radius. A 50 nm drop needs about 2.3% supersaturation and a 0.5 µm drop only 0.2%, while observed ratios rarely exceed 1.02, the dashed line.50 nm: 1.0230.5 µm: 1.002typical ceiling 1.020.010.11radius (µm, log)1.001.10
The Kelvin ratio of equilibrium vapour pressure over a curved drop to that over flat water, at 290 K, against drop radius. A 50 nm drop needs about 2.3% supersaturation and a 0.5 µm drop only 0.2%, while observed ratios rarely exceed 1.02, the dashed line.
  • 150 nm: exponent 1.12 × 10−9/5 × 10−8 = 0.022, ratio 1.023, so about 2.3% supersaturation.
  • 10.5 µm: exponent 0.0022, ratio 1.002, so about 0.2% supersaturation.
  • 2At 1% the air exceeds the 0.5 µm drop's requirement, so it grows; it falls short of the 50 nm drop's, so that drop does not grow and may evaporate.
The 50 nm drop needs about 2.3% supersaturation and the 0.5 µm drop about 0.2%, so only the larger drop grows at 1%. Since observed ratios rarely exceed about 1.02, particles much smaller than 50 nm seldom act as cloud condensation nuclei. AskSia practice weighting.
Sia tip — Convert nanometres to metres inside the exponent; a missing factor of 10−9 turns a ratio near one into nonsense.
Glossary

Key terms

Adiabatic parcel
A finite volume of air that exchanges no heat with its surroundings as it moves along its path.
Sectional approach
Grouping particles of similar size into bins so that one growth equation represents each bin.
Log-normal mode
A bell-shaped size distribution in the logarithm of diameter, set by a number, a median diameter and a width.
FAQ

Parcel Models and Cloud Droplet Activation FAQ

Why can a faster updraft produce more cloud droplets?

A faster parcel cools more quickly in time, so supersaturation builds faster than condensation on existing drops can remove it. The higher supersaturation lets more of the smaller particles exceed their curvature threshold and activate. The practical tests this by running a tenth and ten times the default vertical velocity of 0.3 metres per second.

Why does the model use size bins instead of individual particles?

There are typically billions of aerosol particles in each cubic metre, far too many to give each its own growth equation. Grouping similar sizes into bins, the sectional approach, means one equation per bin; with at least 60 bins the parcel model integrates roughly 64 coupled ordinary differential equations, which a computer handles quickly.

How is marine cloud brightening meant to work?

Spraying sea water from the ocean surface leaves small salt particles that rise into low clouds. As effective condensation nuclei they increase the number of cloud drops; the same condensed water is shared among more, smaller drops, so the cloud reflects more sunlight to space. The aerosol works through the cloud, the first indirect effect, rather than reflecting sunlight itself.

Why does total water stay constant in the parcel model?

The parcel is closed: nothing enters or leaves it. Condensation onto the drops is summed over all size bins to give the rate of change of liquid water, and the vapour budget changes by exactly the opposite amount. Whatever condenses comes out of the vapour, and whatever evaporates returns to it, so vapour plus liquid is constant throughout a run.

Study strategy

Exam move

Revise the parcel model as a chain you can draw from memory: rising motion lowers pressure, lower pressure cools the parcel, cooling raises relative humidity, supersaturation above each drop's curvature threshold drives growth, and growth moves water from vapour to liquid while releasing latent heat that slows the cooling.

Practise the Kelvin calculation for several radii and keep the comparison with the observed ceiling of about 1.02 in your notes. Then work through the practical as a sequence of controlled comparisons: the default lapse rate and cloud base, a slower and a faster updraft, a higher starting humidity, and the three cumulative sea-salt runs that change number, width and diameter in turn.

For each, write the setting changed, the output compared, such as droplet number or cloud-top liquid water, and the mechanism in one sentence. Bring your saved plots to the formative assessment and use the released practical answers to check every interpretation.

A+Everything unlocked
Unlocks this Bible + all 41 of your subjects at The University of Manchester, plus 1,000+ more Bibles across the AskSia library.
Sia - your EART60071 tutor, unlimited, worked the way the exam marks it
The full 3-page Bible + practice bank with worked solutions
Chrome extension - sync your LMS so Sia knows your deadlines
Bilingual EN / Chinese on every Bible and every Sia answer
$0.99 Trial
30-day money-back · cancel in one tap · how it works