BENG0003 Chap.6 Mass Balances Without Reaction
Mass Balances Without Reaction
Mass Balances Without Reaction teaches the Week 10 method that sits behind the largest calculation question on recent papers.
It starts from the general balance, in minus out plus generation minus consumption equals accumulation, and shows how the terms fall away: without a reaction generation and consumption vanish, and at steady state accumulation is zero, leaving mass in equals mass out for the total and for every component. Systems, boundaries, open and closed systems and the batch, continuous and semi-batch classifications are set out first.
The chapter then follows the taught sequence step by step: a flowsheet with every stream and composition, a dashed system boundary, the balance equation, a basis, stated assumptions, a table with letters for unknowns, total and component balances, a solution and the closing check that the sum in minus the sum out is zero.
It explains how to count unknowns against independent equations, why every quantity must be a mass rather than a volume, and how to convert compositions. Worked mixers and separators, including centrifuges, crystallisers, evaporators, filters and dryers, show the same logic, alongside the mark structure examiners use.
What this chapter covers
- 01
The general balance equation and which terms survive
- 02
Systems, boundaries, open and closed systems
- 03
Batch, continuous and semi-batch processes
- 04
The taught step sequence from flowsheet to check
- 05
Counting unknowns against independent equations
- 06
Balance tables with letters for unknown flows
- 07
Mixers with several input streams
- 08
Separators: centrifuges, filters, crystallisers, evaporators and dryers
Worked example · free
Split a fermentation broth in a continuous centrifuge
- 2Flowsheet: one feed (broth, 2000 kg/h, 3% cells) entering the centrifuge, two products (cream C kg/h at 18% cells, supernatant S kg/h at 0.1% cells), all inside a dashed system boundary.
- 1Assumptions and equation: steady state, no reaction, no leaks, no cell breakage, the non-cell part treated as liquid; basis 1 h, so Mass IN = Mass OUT for each component.
- 1Total balance: 2000 kg = C + S.
- 1Cell balance: 0.03 × 2000 kg = 60 kg = 0.18C + 0.001S.
- 2Substitute S = 2000 − C: 60 = 0.18C + 2 − 0.001C, so 0.179C = 58 kg and C = 324.02 kg/h; then S = 2000 − 324.02 = 1675.98 kg/h.
- 1Check: cells 58.32 + 1.68 = 60.00 kg/h; liquid 265.70 + 1674.30 = 1940.00 kg/h = 0.97 × 2000; Sum IN − Sum OUT = 0.
Key terms
- Steady state
- Operation in which flows, compositions and holdup stay constant with time, so nothing accumulates.
- Closed system
- Any process region whose boundary no material crosses during the interval being analysed.
- Basis of calculation
- The fixed quantity or time period, such as one hour or 100 kg of feed, to which all flows are referred.
- Component balance
- An in-equals-out statement written for one chemical species instead of for the total mass.
- Mass fraction
- Mass of one component divided by the total mass of its stream; times 100 it becomes mass per cent.
Mass Balances Without Reaction FAQ
What are the steps to solve a mass balance question?
Draw a flowsheet with every stream and composition, add a dashed system boundary, state whether a reaction occurs and write the balance equation, choose a basis, list assumptions, build a table with letters for unknowns, write total and component balances, solve, and check that total input minus total output is zero.
When can I use mass in equals mass out?
Use it when no reaction occurs and the process is at steady state, so generation, consumption and accumulation are all zero. It then applies to the total mass and to each component separately. If a tank is filling or emptying, keep the accumulation term; if compounds react, you need stoichiometry.
Why can't I put litres straight into a mass balance?
Mass is conserved but volume is not, because mixing liquids or dissolving solids can change the total volume. The Week 10 exercises state that all balance quantities must be masses, so multiply each volume by its density before it enters the table, and convert compositions to mass fractions.
What should I do if a mass balance question seems to be missing information?
Count unknowns against independent equations to confirm the gap, then make a sensible assumption and state it clearly. The exam FAQ says the examiner most likely expects an assumption there, for example that crystals are pure, that filtrate carries no solids, or that seed mass is negligible.
Which parts of a mass balance answer earn marks before any solving?
Every step carries marks. In the revision-session example, a correct flowsheet earned 3 marks, the boundary 1, the no-reaction statement with Mass IN = Mass OUT 1, assumptions 1 and the tables 6, before later parts solved each unknown. Missing units or working cost further marks in model answers.
Exam move
Practise this chapter by hand, one balance at a time, because the method is marked as much as the answer. For each exercise, spend the first minutes on the flowsheet alone: name every stream, write every flow and mass fraction beside its arrow, and draw the dashed boundary. Then write the balance equation in words, the basis and three assumptions before any arithmetic.
Build the table with letters, count unknowns against independent equations, and pick the component balance with only one unknown to start. Rotate through a mixer, a filter, a crystalliser, an evaporator and a dryer so you learn which component ties the flows together in each.
Always finish with the closing check, and time yourself: in the exam a mass balance can be worth a third of the paper, so aim to set one up within ten minutes.