BENG0003 Introduction to Biochemical Engineering
BENG0003 Overview
- University College London
- Term 1 2026/27
- Level 4 module
- Moodle quiz and written exam
- Friday on-campus sessions
BENG0003 Introduction to Biochemical Engineering is the University College London module that introduces biochemical engineering as a discipline: how living cells are grown, how useful products are recovered from them, and the calculations an engineer needs to design and check those steps.
- Assessed by A 20% Moodle quiz in November and an 80% closed-book written exam in the April to May period.
- Biggest marks A long mass balance, worth 30 to 35 marks on the 2022 and 2023 papers, marked step by step.
- Memorise Concentration equations and the Reynolds number; conversion factors are printed on the paper.
- Common loss Missing units, missing working and treating kinematic viscosity as dynamic viscosity.
What you get in the full BENG0003 Exam Bible
- 10 chapters, 64 pages — every examinable topic, week by week
- 25 original practice questions, most with model answers in the A1 Online Moodle Exam format
- 10 worked examples, solved the way BENG0003 marks
- 22 computed figures, redrawn from the course’s own numbers
- Exam-morning plan for the A1 Online Moodle Exam (20%) — what to revise last, where marks are lost
Free on this page: assessment table, chapter map, one worked example, key terms, FAQ. The rest is in the full exam bible.
How BENG0003 is assessed
| Component | Weight | Format |
|---|---|---|
| A1 Online Moodle Exam (Moodle quiz) | 20% | Individual online quiz on Tuesday 3 November 2026, open from 08:00 to 20:00 GMT with 65 minutes once started and one attempt. Open book with a calculator; 30 questions, the last a compulsory upload of workings. |
| A2 In-person written examination | 80% | Closed-book written exam in person, two hours, three compulsory questions with sub-questions worth 25 to 40 marks each. Main exam period, April to May 2027; the exact date is announced later. |
Weights are from the module's 2026/27 assessment table, which lists the Moodle quiz at 20% and the written exam at 80%. An older text block on the same Moodle page and the revision slides still describe the exam as 70% of the module mark, so check the current figure on Moodle. The quiz page gives 65 minutes, while one summary paragraph says 70 minutes and the introductory lecture 60 minutes.
What other students are asking about BENG0003
- Where can I find lecture notes or study guides for BENG0003 at ucl?
- The BENG0003 study guide in AskSia Library covers Introduction to Biochemical Engineering in 10 chapters, with the assessment table, a chapter-by-chapter topic map, key terms and a worked example, free to read on this page.
- Is there a final exam in BENG0003, and how much is it worth?
- Yes. In the offering this AskSia Library guide is built from, A1 Online Moodle Exam (Moodle quiz) carries 20% of the BENG0003 mark; the full split is A1 Online Moodle Exam (Moodle quiz) 20%, A2 In-person written examination 80%.
- What does BENG0003 cover on units, conversions and engineering calculations?
- In AskSia Library's BENG0003 guide, the Units, Conversions and Engineering Calculations chapter explains weeks 7 and 8. SI and imperial units, conversion factors, concentrations and dilutions, Reynolds number and experimental error.
- What does BENG0003 cover on ethics and regulation of biotherapeutics?
- In AskSia Library's BENG0003 guide, the Ethics and Regulation of Biotherapeutics chapter explains week 8. Engineering ethics, stem cell debates, drug approval pathways, clinical trial phases and quality systems.
- What does BENG0003 cover on upstream processing and bioreactor operation?
- In AskSia Library's BENG0003 guide, the Upstream Processing and Bioreactor Operation chapter explains week 9. Media, sterilisation, seed trains, bioreactor designs, impellers and batch, fed-batch, continuous and perfusion operation.
Current BENG0003 dates
| Date | Item | Control |
|---|---|---|
| Tuesday 3 November 2026 | A1 Moodle quiz | Opens 08:00 and closes 20:00 GMT; 65 minutes once started, one attempt. |
| April to May 2027 | A2 written examination | Main exam period; the date and time are to be confirmed by UCL. |
Dates are as published in the module's 2026/27 assessment information. Confirm exact deadlines and submission settings in the live LMS.
What BENG0003 covers
Ten chapters follow the teaching weeks, from host cells and engineering units through upstream and downstream processing to mass balances, stoichiometry, bioenergy and therapeutic products.
Biological Systems and the Bioprocess Landscape
Week 6. Noncellular agents, prokaryotes and eukaryotes, host cells, growth curves, cell culture and the shape of a bioprocess.Biological Systems and the Bioprocess Landscape sets up the vocabulary the rest of the module depends on.
- Noncellular agents, prokaryotes and eukaryotes
- Industrial hosts and the products they make
- Microbial and mammalian cells compared
- Expression systems and recombinant DNA
- Growth modes, doubling time and the four growth phases
- Primary cells, cell lines and immortalised lines
Units, Conversions and Engineering Calculations
Weeks 7 and 8. SI and imperial units, conversion factors, concentrations and dilutions, Reynolds number and experimental error.Units, Conversions and Engineering Calculations covers the Week 7 and Week 8 toolkit that every later calculation in the module depends on.
- SI base quantities, derived units and dimensions
- Dimensional consistency and adding like units only
- Conversion factors and imperial unit traps
- Moles, fractions, percentages and ppm
- Stock dilutions for media supplements
- Reynolds number for pipes and stirred tanks
Ethics and Regulation of Biotherapeutics
Week 8. Engineering ethics, stem cell debates, drug approval pathways, clinical trial phases and quality systems.Ethics and Regulation of Biotherapeutics covers the Week 8 material on how a new therapy reaches patients legally and responsibly.
- Why medicines are regulated and the FDA approval route
- IND submission, the 30-day wait and three clinical trial phases
- New Drug Applications, Biologics License Applications and attrition
- GMP, quality control, quality assurance, validation and SOPs
- Advanced therapy categories and the EU default classification rules
- Autologous and allogeneic products and how each is manufactured
Upstream Processing and Bioreactor Operation
Week 9. Media, sterilisation, seed trains, bioreactor designs, impellers and batch, fed-batch, continuous and perfusion operation.Upstream Processing and Bioreactor Operation covers the Week 9 material on growing cells to a dense, productive culture.
- Definition and five steps of upstream processing
- Planar culture vessels and their limits
- Stirred tank, pneumatic and hydraulic bioreactors
- Impeller flow patterns and microcarriers for adherent cells
- Batch, fed-batch, continuous and perfusion operation
- Seed trains and expansion time from a single vial
Downstream Processing and Product Recovery
Week 9. Recovery, isolation, purification and polishing, with centrifugation, filtration, chromatography and step yields.Downstream Processing and Product Recovery covers the Week 9 material on turning a dilute, impure fermentation broth into a product of the required purity.
- The RIPP sequence and example operations for each stage
- Process decisions, product location and concentration by scale
- Overall yield as the product of step yields
- Disk-stack centrifugation and precipitation
- Dead-end and tangential flow filtration
- Affinity, ion exchange, hydrophobic interaction and size exclusion chromatography
Mass Balances Without Reaction
Week 10. Flowsheets, system boundaries, basis, assumptions, balance tables and component balances for non-reacting units.Mass Balances Without Reaction teaches the Week 10 method that sits behind the largest calculation question on recent papers.
- The general balance equation and which terms survive
- Systems, boundaries, open and closed systems
- Batch, continuous and semi-batch processes
- The taught step sequence from flowsheet to check
- Counting unknowns against independent equations
- Balance tables with letters for unknown flows
Stoichiometry and Reacting Systems
Week 12. Balanced equations, molar ratios, limiting and excess reactants, conversion and theoretical yield.Stoichiometry and Reacting Systems covers the Week 12 calculations that turn a reaction equation into masses, ratios and balances.
- Moles, molar mass and the atomic masses used in lectures
- Balancing reactions with letter coefficients
- Limiting reactant, stoichiometric requirement and percentage excess
- Fractional conversion and degree of completion
- Glucose routed to a product on fed or consumed basis
- Yield on substrate and theoretical yield
Recycle, Bypass and Multiple-Unit Balances
Week 13. Recycle, bypass and purge streams, linked units and choosing a system boundary for each unknown.Recycle, Bypass and Multiple-Unit Balances extends the Week 10 mass-balance method to the Week 13 flowsheets where streams loop back, skip a unit or pass through several units in series.
- Recycle, bypass and purge streams defined
- Why plants use recycle and cell recycle
- Bypass around an evaporator with a mixing point
- Choosing overall, mixer, unit and splitter boundaries
- Which boundaries reveal the recycle flow
- Counting unknowns against independent equations
Bioenergy and Biofuels
Week 14. Biomass feedstocks, photosynthesis, bioethanol, biodiesel, biogas and energy yield calculations.Bioenergy and Biofuels covers the Week 14 lectures on how biomass becomes heat, power and fuel, and the calculations that test that knowledge.
- Biomass sources and carbon neutrality
- Photosynthetic efficiency and crop yield per hectare
- C3 and C4 plants compared
- Bioethanol from sugar, starch and lignocellulose
- Separate versus simultaneous saccharification and fermentation
- Anaerobic digestion stages and energy efficiency
Therapeutic Products and Tissue Engineering
Week 15. Antibiotics, recombinant proteins and antibodies, vaccines, stem cells and tissue engineering as complete bioprocesses.Therapeutic Products and Tissue Engineering covers the Week 15 applications lectures, where the engineering from earlier weeks is applied to real medicines.
- Natural, semi-synthetic and synthetic antibiotics with examples
- Penicillin fermentation in fed-batch mode and recovery of a secreted product
- Monoclonal against polyclonal antibodies and the hybridoma technique
- Four vaccine types and an example of each
- Flu vaccine production in embryonated eggs and in cell lines
- Autologous, allogeneic and xenogeneic cell therapy routes
It runs in Term 1 with two on-campus sessions each Friday.
The teaching sequence opens with biological systems and the bioprocess landscape, moves through units, conversions, concentrations and the Reynolds number, then covers ethics and regulation of biotherapeutics, upstream and downstream processing, mass balances without reaction, stoichiometry, balances with recycle and bypass, bioenergy and biofuels, and finally applications such as vaccines, recombinant proteins, antibiotics and tissue engineering.
Assessment has two parts.
An online Moodle quiz worth 20% runs on Tuesday 3 November 2026: it is open book, allows a calculator and gives one attempt, and its final question requires an upload of your workings for the calculation questions.
The remaining 80% comes from a closed-book, in-person written examination of two hours with three compulsory questions, held in the main exam period of April to May 2027. Past papers since 2022 have paired one cell culture question containing Reynolds number and dilution calculations with a long mass balance worth 30 to 35 marks and a bioenergy or applications question.
This guide follows the same order.
Every chapter explains the ideas in plain language, works an original example step by step, and points out where the marking evidence shows students gain or lose credit: missing units, skipped working, an undrawn flowsheet, or a kinematic viscosity treated as a dynamic one. Practice questions are new, modelled on the question types in the past papers rather than copied from them.
Worked example · free
Track a culture through four doublings
- 1Count the doublings: 60 h divided by 15 h per doubling gives 4 doublings.
- 1Convert doublings to a multiplication factor: 2 × 2 × 2 × 2 = 16.
- 2Multiply the seeding density by the factor: 2.0 × 10^5 cells/mL × 16 = 3.2 × 10^6 cells/mL, with units kept on every line.
- 1Plot day zero at the seeding density, because the curve records growth from inoculation and a missing first point hides any lag.
Key terms
- Bioprocessing
- Using natural or engineered cells, tissues or organs to manufacture industrially or medically useful products.
- Upstream processing
- The first stage of a bioprocess, covering media preparation, sterilisation, cell sourcing and culture in a bioreactor.
- Downstream processing
- The recovery, isolation, purification and polishing steps that turn a culture broth into a finished product.
- Unit operation
- Any single processing step that changes or separates material, such as centrifugation, filtration or chromatography.
- Doubling time
- The time a growing cell population takes to double in number.
- Expression system
- A host organism engineered with foreign DNA so that it produces a target product such as a recombinant protein.
- Reynolds number
- A dimensionless ratio of inertial to viscous forces that classifies flow as laminar, transitional or turbulent.
- Kinematic viscosity
- Dynamic viscosity divided by fluid density, reported in square metres per second.
- Mass balance
- An accounting of material entering, leaving, generated, consumed and accumulating within a defined system boundary.
- System boundary
- The closed line drawn on a flowsheet that defines exactly which streams cross into or out of the balance.
- Limiting reactant
- The reactant that runs out first and therefore caps how much product a reaction can form.
- Recycle stream
- A stream returned from a later point in a process to an earlier one to recover material or improve conversion.
- Fed-batch culture
- A culture started as a batch and then fed intermittently, so volume rises and the product is harvested at the end.
BENG0003 FAQ
How hard is Introduction to Biochemical Engineering?
The module mixes biology recall with engineering calculation, and the evidence points to the calculations as the pressure point. The written exam carries 80% of the mark, lasts two hours and has three compulsory questions. Examiner feedback on the 2023-24 paper says weaker scripts struggled most with the mass balance, and about a quarter of candidates could not identify the streams or draw the flow diagram.
What is the assessment structure?
Two components make up the module mark. The online Moodle quiz on 3 November 2026 is worth 20%, while the in-person written examination in the April to May 2027 period is worth 80%. Some older pages on Moodle still describe the exam as 70%, so confirm the current split on the module page before you plan revision time.
What does the final exam look like?
Expect three compulsory questions, each worth between 25 and 40 marks and divided into sub-questions, to be completed in two hours. The paper is closed book and sat in person. Recent papers combine short written answers on bioprocessing with calculations such as unit conversions, concentrations, Reynolds number and a multi-part mass balance built around a case study.
Which equations must I memorise?
The 2026 exam FAQ says you must remember the equations for concentration calculations and the Reynolds number. Unit conversion factors are printed at the end of the paper, and no separate equation sheet is issued. Practise converting pounds per cubic foot, inches and poise into SI units quickly, because the factors alone do not tell you which ones to use.
Are past papers and model answers available?
Past papers are held in the UCL Library exam paper collection, and several recent papers sit in the module's Moodle folder. The 2020 and 2021 papers cannot be used because assessment in those years took a different form. Moodle carries a single set of model solutions showing what each question type requires, but solutions are not released for the past papers themselves.
How are mass balance questions marked?
Marks are allocated to each step, so following the sequence taught in class protects your score. A typical breakdown rewards a flowsheet with correctly identified streams and components, a system boundary, the balance equation, stated assumptions and a complete table before any number is solved. If information seems missing, note it and state the assumption the examiner probably expects.
Do units and decimal places affect my mark?
Yes. Units must appear throughout every calculation, and the module's model answers deduct marks when they are missing or when detailed working is not shown. Two decimal places are normally sufficient for final answers unless a question asks otherwise, but you can carry more significant figures through intermediate steps to avoid rounding drift in long calculations.
What happens if I miss the quiz workings upload?
The final question of the Moodle quiz asks you to upload your workings for every calculation question you answered. Not uploading them, or uploading an unreadable or unrelated document, costs the full 30 marks attached to that question. Giving a final answer without its working costs 2.5 marks per question, and only Word, PDF or JPEG files are accepted.
Questions students ask in each BENG0003 chapter
- Why do engineers care whether a cell is prokaryotic or eukaryotic?
- The difference decides robustness, nutrition and what the cell can make. Bacteria have walls, grow fast and are cheap, but cannot glycosylate proteins and often trap large proteins in inclusion bodies. Mammalian cells fold and modify complex proteins correctly, yet they are fragile under shear, slow to grow and need rich, expensive media. Chapter 01 · Biological Systems and the Bioprocess Landscape
- Do I need to memorise unit conversion factors for the exam?
- No. The exam FAQ says conversion factors are printed at the end of the paper, and the Moodle quiz supplies Appendix A of Doran. You must, however, remember the concentration equations and the Reynolds number formulas, because no equation sheet is issued. Practise writing the factors as fractions so the units cancel visibly. Chapter 02 · Units, Conversions and Engineering Calculations
- How many people take part in each phase of a clinical trial?
- Phase I usually enrols 20 to 80 healthy volunteers to check safety. Phase II tests whether the treatment works in 100 to 300 patients who have the illness. Phase III compares the new product with existing treatment in 1,000 to 3,000 patients using double-blinded tests, so each later phase is larger, rising from tens of volunteers to thousands of patients. Chapter 03 · Ethics and Regulation of Biotherapeutics
- What is upstream processing in a bioprocess?
- Upstream processing is the first part of a bioprocess. It covers preparing a medium suited to the cell type, sterilising equipment and reagents, sourcing cells from a frozen vial, and growing them through flasks and progressively larger bioreactors, often as a seed train, until the culture is ready for harvest and handover to downstream processing. Chapter 04 · Upstream Processing and Bioreactor Operation
- What does RIPP stand for in downstream processing?
- RIPP stands for recovery, isolation, purification and polishing, the general order of downstream steps. Recovery uses centrifugation, filtration or cell disruption; isolation uses precipitation, flocculation, adsorption or extraction; purification relies on chromatography or ultrafiltration; and polishing uses size exclusion, crystallisation, lyophilisation or spray drying to reach the final specification. Chapter 05 · Downstream Processing and Product Recovery
- What are the steps to solve a mass balance question?
- Draw a flowsheet with every stream and composition, add a dashed system boundary, state whether a reaction occurs and write the balance equation, choose a basis, list assumptions, build a table with letters for unknowns, write total and component balances, solve, and check that total input minus total output is zero. Chapter 06 · Mass Balances Without Reaction
- How do you find coefficients a, b and c in a reaction equation?
- Write one balance per element. Set the coefficient of the carbon source to one, solve carbon first, then hydrogen, and leave oxygen until last because it appears in most species. Fractions such as 1.5 are acceptable, or multiply all letters to clear them. Finish by checking that the total mass of reactants equals the total mass of products. Chapter 07 · Stoichiometry and Reacting Systems
- What is the difference between recycle and bypass in mass balances?
- Recycle takes material that has already left a unit and returns it upstream, so it forms a closed loop. Bypass divides the fresh feed before a unit so that part skips it and rejoins further on, so no loop forms. On a flowsheet, follow the arrow: a stream running backwards is a recycle, one running forwards around a unit is a bypass. Chapter 08 · Recycle, Bypass and Multiple-Unit Balances
- What is the difference between C3 and C4 plants?
- C3 plants fix carbon first into a three-carbon molecule, work best at lower temperature and light, and photorespire when light is excessive. C4 plants make a four-carbon molecule that concentrates CO2 in their cells, avoid photorespiration and perform best in hot, bright climates. Sugar cane, maize and miscanthus are the C4 energy crops named in lectures. Chapter 09 · Bioenergy and Biofuels
- Is penicillin a broad-spectrum antibiotic?
- Natural penicillin G mainly acts on Gram-positive bacteria, so it is better described as relatively narrow in spectrum, even though one lecture slide labels it broad. Wider activity came from semi-synthetic derivatives such as ampicillin and amoxicillin, made by chemically or enzymatically modifying the penicillin G molecule produced by Penicillium chrysogenum. Chapter 10 · Therapeutic Products and Tissue Engineering
How to study for the exam
Treat BENG0003 as two linked skill sets and train both every week. For the calculation side, build a fixed routine: write the quantity asked for, list every given value with its units, convert everything into SI before substituting, and carry units on each line so a wrong conversion shows itself.
Drill Reynolds number questions in both directions, including the variant that asks for a minimum agitation speed, and always check whether a viscosity is dynamic or kinematic. For mass balances, practise the full taught sequence from a blank page: flowsheet, boundary, balance equation, basis, assumptions, table with letters for unknowns, then total and component balances and a final check that inputs equal outputs.
For the descriptive side, turn each lecture into short comparison answers, such as batch against fed-batch, adherent against suspension culture, or dead-end against cross-flow filtration, and attach one real example to each. In the final fortnight, sit one complete past paper under two-hour timing, mark it against the module's model answers, and record each lost mark by cause rather than by topic.