University College London · FACULTY OF ENGINEERING

BENG0003 Chap.5 Downstream Processing and Product Recovery

- one subject, every graph, every model, every mark
8 Chapters5-page Bible
Our own words - no uploaded lecturer files
Updated for this semester
Chapter 5 of 10 · BENG0003

Downstream Processing and Product Recovery

Downstream Processing and Product Recovery covers the Week 9 material on turning a dilute, impure fermentation broth into a product of the required purity. It introduces the RIPP sequence of recovery, isolation, purification and polishing with example operations for each stage, and the questions that shape a route, including price, titre, intended use and whether the product is intracellular or secreted.

Product concentration by scale explains why antibodies at about 0.1% w/w are harder to recover than ethanol at 7 to 12%. The chapter shows that step yields multiply, graphs how overall yield falls as steps are added, and recomputes the lecture examples, correcting the penicillin acylase figure to 95.4% per step.

It compares dead-end and tangential flow filtration, with permeate, retentate and flux behaviour, explains the disk-stack centrifuge and precipitation, and sets out affinity, ion exchange, hydrophobic interaction and size exclusion chromatography, noting that Protein A releases antibody at low pH. A worked train follows 2 kg of antibody through eight steps.

Viral inactivation, nanofiltration and 0.2 µm sterile filtration complete the safety picture, together with the extra disruption step an intracellular product needs.

In this chapter

What this chapter covers

  • 01

    The RIPP sequence and example operations for each stage

  • 02

    Process decisions, product location and concentration by scale

  • 03

    Overall yield as the product of step yields

  • 04

    Disk-stack centrifugation and precipitation

  • 05

    Dead-end and tangential flow filtration

  • 06

    Affinity, ion exchange, hydrophobic interaction and size exclusion chromatography

  • 07

    Viral inactivation, nanofiltration and sterile filtration

  • 08

    Routes for intracellular and secreted products

Worked example · free

Calculate overall yield as purification steps accumulate

Q [6 marks]. A purification route is being designed with identical step yields. Calculate the overall yield after 10 steps at 90% per step and at 95% per step, find the largest number of 95% steps that keeps the overall yield at or above 50%, and find the per-step yield needed to achieve exactly 50% over 10 steps. The mark allocation shown is AskSia's own practice weighting, not a published university scheme.
Each curve plots overall yield against the number of steps for a fixed per-step yield; at 10 steps a 95% step keeps 59.9% of the product, a 90% step only 34.9%,Each curve plots overall yield against the number of steps for a fixed per-step yield; at 10 steps a 95% step keeps 59.9% of the product, a 90% step only 34.9%, and the dashed line marks 50% overall.Number of stepsOverall yield, %05101510050% overall59.9%95% per step34.9%90% per step
Each curve plots overall yield against the number of steps for a fixed per-step yield; at 10 steps a 95% step keeps 59.9% of the product, a 90% step only 34.9%, and the dashed line marks 50% overall.
  • 1Overall yield with equal steps = s^n. At 90%: 0.90^10 = 0.3487, so 34.87% of the product survives 10 steps.
  • 1At 95%: 0.95^10 = 0.5987, so 59.87% survives, which is 25.01 percentage points more than at 90%.
  • 2Set 0.95^n = 0.50: n = ln 0.50 / ln 0.95 = 13.51. Check 0.95^13 = 51.33% and 0.95^14 = 48.77%, so at most 13 steps stay at or above 50%.
  • 2Per-step yield for 50% over 10 steps = 0.50^(1/10) = 0.9330, so each step must deliver 93.30%, which is well above 90%.
34.87% at 90% per step and 59.87% at 95% per step after 10 steps; at most 13 steps of 95% keep the yield at or above 50%; 50% over 10 steps needs 93.30% per step.
Sia tip — Show the formula s^n once, then write each power with its value so a single slip does not cost the whole calculation.
Glossary

Key terms

Step yield
Fraction of product entering a unit operation that leaves it in the product stream, usually given as a percentage.
Tangential flow filtration
Membrane filtration in which feed sweeps parallel to the surface, sending permeate through and recirculating retentate.
Hydrophobic interaction chromatography
Column separation that binds proteins by hydrophobicity in high salt and releases them as the salt concentration falls.
Size exclusion chromatography
Gel filtration in which molecules too large for the bead pores travel between the beads and elute before smaller ones.
Viral nanofiltration
Removal of virus particles on a nanometre-scale filter after capture and polishing, just before formulation.
FAQ

Downstream Processing and Product Recovery FAQ

What does RIPP stand for in downstream processing?

RIPP stands for recovery, isolation, purification and polishing, the general order of downstream steps. Recovery uses centrifugation, filtration or cell disruption; isolation uses precipitation, flocculation, adsorption or extraction; purification relies on chromatography or ultrafiltration; and polishing uses size exclusion, crystallisation, lyophilisation or spray drying to reach the final specification.

Why does overall yield fall so quickly in a long purification process?

Each step passes on only a fraction of what it receives, so the fractions multiply. Ten steps at 90% leave about 35% of the product, while ten at 95% leave about 60%. That is why the lecture asks for step yields of at least 90%, preferably above 95%, once a process has more than ten steps.

What is the difference between dead-end and cross-flow filtration?

Dead-end filtration pushes feed straight at the filter, so a cake grows and the flux drops towards zero. In cross-flow, or tangential flow, filtration the feed runs parallel to the membrane, solids concentrate at the surface but flux and cake thickness reach a steady state, and the product-rich retentate is recirculated.

How is an antibody eluted from a Protein A column?

Antibody binds Protein A specifically while other proteins wash through in binding buffer, and it is released by lowering the pH of the elution buffer. The low-pH conditions also inactivate viruses, which is why a viral inactivation hold usually follows straight after this capture step. One lecture slide wrongly says the pH is raised.

How does hydrophobic interaction chromatography work?

The sample is loaded in a high-salt buffer, which reduces the water shell around proteins so their hydrophobic patches bind the column. Elution uses a decreasing salt gradient, and a regeneration step removes anything still bound. The step removes impurities such as host-cell proteins, DNA, leached Protein A, viruses and endotoxins.

Study strategy

Exam move

Organise revision around the RIPP sequence: write the four stages across a page and list at least two operations under each, then add one sentence on the principle behind every operation. Learn the filtration comparison as three paired contrasts, feed direction, solids behaviour and flux over time, and practise drawing both schematics quickly, because model answers award marks for each sketch.

For chromatography, memorise what each method exploits and how the product is released, especially the high-salt load and falling-salt elution in hydrophobic interaction and the low-pH release from Protein A. Rehearse the yield relation with several step counts and per-step values until taking a root or a logarithm feels routine.

Finally, prepare a short sterility answer that links 0.2 µm filtration, low-pH inactivation and nanofiltration to the product history.

A+Everything unlocked
Unlocks this Bible + all 32 of your subjects at University College London, plus 1,000+ more Bibles across the AskSia library.
Sia - your BENG0003 tutor, unlimited, worked the way the exam marks it
The full 5-page Bible + practice bank with worked solutions
Chrome extension - sync your LMS so Sia knows your deadlines
Bilingual EN / Chinese on every Bible and every Sia answer
$0.99 Trial
30-day money-back · cancel in one tap · how it works