CIVL2102 Chap.3 Structures, Hong Kong Geology and Weathering
Structures, Hong Kong Geology and Weathering
Structures reorganise the rock mass
Faults, folds and related deformation change orientation, continuity and groundwater paths after a rock forms. A fault zone may contain fractured, sheared or altered material unlike the surrounding rock. Folds rotate bedding and can repeat units across an alignment.
Their engineering value lies in the property contrast and geometry they predict, not simply in appearing on a map.
Hong Kong geology supplies the local history
The course traces volcanic and intrusive episodes together with later weathering and erosion. That history helps explain why strong fresh rock, altered zones and deep weathering can occur close together.
Local examples connect faults and folds with slope and tunnel behaviour. A site description should therefore state which part of the history is expected to control the proposed work.
Weathering creates a profile rather than one boundary
Physical processes break rock, chemical processes alter minerals, and biological processes assist both. Climate controls their balance.
Material grades describe the result from fresh rock through increasingly decomposed material toward residual soil. Grade should integrate mineral alteration, preserved fabric and strength. A weathering boundary is commonly irregular, especially near structures that increase water access.
What this chapter covers
- 01
Fault-zone composition and engineering contrast
- 02
Fold geometry and repeated units
- 03
Hong Kong volcanic and intrusive history
- 04
Physical, chemical and biological weathering
- 05
Granite weathering profiles
- 06
Material-grade descriptions
Worked example · free
Explain variable rockhead
- 3Name the geological mechanism for the contrast.
- 3Predict the geometry and engineering consequence.
- 3Choose an investigation that could refute the model.
Key terms
- Fault Zone
- A band of deformation around a fault that may contain fractured, sheared or altered material.
- Fold
- A bend in originally layered rock that changes bedding orientation and repetition.
- Rockhead
- The surface at which rock is encountered beneath soil or weathered material.
- Residual Soil
- Soil formed in place by weathering of the underlying parent rock.
- Chemical Weathering
- Mineral alteration or dissolution through chemical reactions with water and dissolved substances.
- Material Grade
- A weathering description combining decomposition, preserved structure and strength.
Structures, Hong Kong Geology and Weathering FAQ
Why can a fault affect rockhead?
Faulting can fracture rock and increase pathways for water, allowing deeper weathering and erosion than in adjacent intact material. The result may be an abrupt or elongated depression in competent rock rather than a smooth regional surface.
Is weathering grade determined by colour?
Colour can support a description, but it is not sufficient. Grade should integrate mineral decomposition, preservation of original fabric, ease of breaking and transition toward soil. Fresh surfaces and strength observations help prevent a coating from controlling the classification.
How should local geology enter an engineering answer?
Use it to predict geometry, variability and process. Name the unit or structure only when it changes an investigation, parameter choice, foundation level, slope mechanism, tunnel support demand or groundwater expectation. A place name without a consequence adds little.
Exam move
Draw a granite weathering profile and place a fault through it. For each zone, write the observation you would expect in core and the design question it changes. Then take one Hong Kong map example and explain how the geological history produces the present material contrast. Keep process, geometry and consequence in separate sentences. Revise structures by separating what can be mapped from what must be inferred.
For a fault, record trace, orientation, displacement indicators, zone width, material condition, water observations, and confidence. Then ask how each observation could affect a slope, tunnel, or foundation. Repeat the exercise for a fold by tracking bedding attitude and repetition rather than merely naming anticline or syncline.
For weathering, construct a vertical log that includes mineral alteration, fabric preservation, strength, core recovery, and irregular boundaries. Move the weathering front upward or downward near the fault and explain why enhanced water access could produce that geometry. Compare two boreholes and resist drawing a smooth boundary until the evidence supports one.
A useful Hong Kong drill is to begin with the regional volcanic and intrusive history, then narrow to the property contrast a project would encounter. State which part is historical context and which observation controls the current design. Test the model with a third hypothetical borehole or exposure: predict what it should show, then decide what contrary result would force revision.
Review common errors explicitly, including treating every linear valley as a confirmed fault, assigning weathering grade from colour alone, and extending one borehole boundary across a site without structural control. Finish each answer with an action such as revised drilling orientation, groundwater observation, or targeted mapping that could reduce the uncertainty you identified.