The University of Hong Kong · FACULTY OF ENGINEERING

CIVL2102 Engineering Geology and Rock Mechanics

- one subject, every graph, every model, every mark
10 Chapters33-page Bible
Our own words - no uploaded lecturer files
Updated for this semester
The Complete Exam Bible · First Semester, 2026-27

CIVL2102 Overview

Engineering Geology and Rock Mechanics
— Read the ground, resolve the forces, check the mechanism.
  • The University of Hong Kong
  • First Semester, 2026-27
  • Level 2 engineering
  • Three-hour closed-book exam
  • Practical field and laboratory work

What this course joins together

Engineering Geology and Rock Mechanics studies how geological materials, structures and histories control civil engineering works, then adds the mechanics needed to quantify deformation and failure.

  • Assessed by Continuous Assessment, Practical Work and a Written Examination, with a pass mark needed for each assessment type.
  • Exam structure The examination is split equally between Engineering Geology and Rock Mechanics.
  • Core method Describe the material and geometry before selecting a mechanical model or design response.
Why read this guide

What you get in the full CIVL2102 Exam Bible

  1. 10 chapters, 33 pages — every examinable topic
  2. 17 original practice questions, each with a model answer in the Written Examination format
  3. 10 worked examples, solved the way CIVL2102 marks
  4. 10 computed figures, redrawn from the course’s own numbers
  5. Exam-morning plan for the Written Examination (70%) — what to revise last, where marks are lost

Free on this page: assessment table, chapter map, one worked example, key terms, FAQ. The rest is in the full exam bible.

CIVL2102 · The University of Hong Kong
An independent, AskSia-authored study guide. AskSia is not affiliated with, endorsed by, or sponsored by The University of Hong Kong; the course code and name are used for identification only.
Assessment

How CIVL2102 is assessed

ComponentWeightFormat
Continuous Assessment10%Two assignments and a field-trip report; the published safety rule gives zero for the compulsory site-visit part if required safety footwear is not worn
Practical Work20%Mineral and rock identification, field trip and rock-mechanics tests
Written Examination70%Three-hour sit-in closed-book exam, split equally between the two course halves

The three published weights total 100%. Continuous Assessment, Practical Work and Written Examination each require a pass mark across the full assessment scope. The published compulsory site-visit rule requires students to wear their own safety footwear; a student without it is turned away, receives zero for that part of the assessment and is not given a makeup visit. The current field-trip schedule lists Group 1 on 10 October 2026 and Group 2 on 17 October 2026, both from 9 a.m. to 2 p.m.; confirm group allocation and current pass rules on the course Moodle page. The examination is three hours, sit-in and closed-book, with equal Engineering Geology and Rock Mechanics parts. The official course information for this offering does not state a question pattern or permitted-aids list.

Assessment structure

10%20%70%ContinuousPractical WorkWritten Examination

Segment widths reproduce the published weights and total 100%.

Other students are asking · CIVL2102

What other students are asking about CIVL2102

Where can I find lecture notes or study guides for CIVL2102 at HKU?
The CIVL2102 study guide in AskSia Library covers Engineering Geology and Rock Mechanics in 10 chapters, with the assessment table, a chapter-by-chapter topic map, key terms and a worked example, free to read on this page.
Is there a final exam in CIVL2102, and how much is it worth?
Yes. In the offering this AskSia Library guide is built from, Written Examination carries 70% of the CIVL2102 mark; the full split is Continuous Assessment 10%, Practical Work 20%, Written Examination 70%.
What does CIVL2102 cover on rock origins and stratigraphic order?
In AskSia Library's CIVL2102 guide, the Rock Origins and Stratigraphic Order chapter explains igneous cooling, sediment transport, metamorphic change and relative-age relationships.
What does CIVL2102 cover on structures, hong kong geology and weathering?
In AskSia Library's CIVL2102 guide, the Structures, Hong Kong Geology and Weathering chapter explains faults, folds, local geological history, weathering processes and material grades.
What does CIVL2102 cover on geological maps and cross-sections?
In AskSia Library's CIVL2102 guide, the Geological Maps and Cross-Sections chapter explains topographic profiles, contact patterns, dip geometry and evidence-constrained sections.
Weights, dates and every chapter are set out with their sources further down this page.
Current dates · verify in LMS

Current CIVL2102 dates

DateItemControl
10 October 2026Field trip, Group 1Published in the updated field-trip schedule.
17 October 2026Field trip, Group 2Published in the updated field-trip schedule.

Dates are as published in the updated field-trip schedule for this offering. Confirm exact deadlines and submission settings in the live LMS.

Contents · every chapter, one map

What CIVL2102 covers

Ten chapters connect mineral and rock description with geological geometry, stress, laboratory evidence, failure criteria and engineering decisions.

01

Minerals and Rock Identification

diagnostic properties, hardness brackets, cleavage, streak and defensible specimen descriptions

Identification is an argument from properties

A reliable mineral name follows a sequence of observations. Colour and lustre are quick but often non-unique. Hardness brackets a specimen between reference materials.

  • Colour and lustre as screening observations
  • Mohs hardness as an ordinal bracket
  • Cleavage against fracture
  • Streak and crystal habit
  • Quartz, feldspar and mica distinctions
  • Fresh faces and weathered surfaces
In the full guide: 2 pages · 1 practice question · 1 figure
02

Rock Origins and Stratigraphic Order

igneous cooling, sediment transport, metamorphic change and relative-age relationships

Rock texture is a record of process

Igneous rocks form from cooling melt, sedimentary rocks from deposition and lithification, and metamorphic rocks from change by heat and pressure without wholesale melting.

  • Cooling rate and igneous texture
  • Sediment grain size, sorting and rounding
  • Metamorphic change and foliation
  • Superposition and initial horizontality
  • Cross-cutting relationships
  • Unconformities and missing time
In the full guide: 2 pages · 1 practice question · 1 figure
03

Structures, Hong Kong Geology and Weathering

faults, folds, local geological history, weathering processes and material grades

Structures reorganise the rock mass

Faults, folds and related deformation change orientation, continuity and groundwater paths after a rock forms. A fault zone may contain fractured, sheared or altered material unlike the surrounding rock.

  • Fault-zone composition and engineering contrast
  • Fold geometry and repeated units
  • Hong Kong volcanic and intrusive history
  • Physical, chemical and biological weathering
  • Granite weathering profiles
  • Material-grade descriptions
In the full guide: 2 pages · 1 practice question · 1 figure
04

Geological Maps and Cross-Sections

topographic profiles, contact patterns, dip geometry and evidence-constrained sections

A section is constrained by the map

Cross-section construction begins with horizontal position and elevation. Mark the transect, record contour crossings, build the topographic profile and project geological contacts to their correct locations.

  • Transect and contour crossings
  • Topographic profile construction
  • Projection of contacts
  • Horizontal, vertical and dipping traces
  • Faults, intrusions and folds
  • Vertical exaggeration and apparent dip
In the full guide: 2 pages · 1 practice question · 1 figure
05

Discontinuities and Stereonet Reasoning

orientation, spacing, persistence, filling, poles, great circles and kinematic screening

A rock mass is not a large intact specimen

Joints, bedding, faults and shear zones divide a rock mass into blocks.

  • Intact rock against rock mass
  • Orientation, spacing and persistence
  • Roughness, aperture and filling
  • Strike, dip and dip direction
  • Great circles, poles and intersection lines
  • Kinematic possibility against stability
In the full guide: 2 pages · 1 practice question · 1 figure
06

Stress, Strain and Elastic Response

stress components, principal planes, Mohr circles, strain and elastic parameters

Stress belongs to a plane

Stress is force per area at a point, resolved into normal and shear components on a chosen plane. Rotating the plane changes those components even though the underlying state is unchanged.

  • Stress as force distributed over area
  • Normal and shear components
  • Principal planes and stresses
  • Mohr circle centre, radius and angle
  • Normal and shear strain
  • Young's modulus and Poisson's ratio
In the full guide: 2 pages · 1 practice question · 1 figure
07

In-Situ Stress and Measurement

natural and induced stress, near and far fields, flatjack, fracturing and overcoring

The ground carries stress before construction

Natural stress exists before a new excavation. Construction redistributes it into an induced state.

  • Natural and induced stress
  • Gravitational, tectonic and residual origins
  • Near-field and far-field zones
  • Vertical overburden estimate
  • Flatjack and hydraulic fracturing
  • Overcoring and elastic inversion
In the full guide: 3 pages · 1 practice question · 1 figure
08

Rock Testing and Strength Parameters

uniaxial compression, Brazilian tension, triaxial loading and parameter validity

Test selection begins with the property question

Index tests provide quick comparative information for classification or correlation. Design tests measure strength or deformability under a controlled stress path.

  • Index tests against design tests
  • Uniaxial compression geometry and loading
  • Stress-strain and elastic parameters
  • Brazilian indirect tension
  • Triaxial confinement and peak states
  • Failure observation and validity
In the full guide: 3 pages · 1 practice question · 1 figure
09

Failure Criteria and Water Effects

Mohr-Coulomb resistance, tensile cutoff, effective stress and nonlinear rock strength

A criterion compares a stress state with a boundary

The Mohr-Coulomb criterion represents shear resistance as cohesion plus effective normal stress multiplied by the tangent of friction angle. In Mohr space, critical circles touch a linear envelope.

  • Mohr-Coulomb envelope
  • Cohesion and friction angle
  • Tensile cutoff
  • Demand against resistance
  • Pore pressure and effective stress
  • Hoek-Brown and fitting range
In the full guide: 3 pages · 1 practice question · 1 figure
10

Rock Slopes and Engineering Works

plane, wedge, toppling and circular failures, stabilisation, foundations and excavations

Mechanism selection starts with structure

Plane, wedge and toppling failures depend strongly on discontinuity orientation relative to the slope face.

  • Plane, wedge, toppling and circular failure
  • Kinematic screening
  • Slope free-body forces
  • Water and effective normal force
  • Rock bolts and drainage
  • Foundations, tunnels and ground models
In the full guide: 3 pages · 1 practice question · 1 figure

The first half builds the ground model: minerals, rocks, stratigraphy, faults, folds, Hong Kong geology, weathering, maps, cross-sections, discontinuities and stereonets. The second half resolves forces and material response: stress, strain, elastic behaviour, in-situ stress, laboratory tests, strength criteria, rock slopes, excavations and foundations. The strongest answers cross that boundary.

A calculation has to represent the mapped mechanism, and a geological observation has to change an engineering decision.

Why the course feels demanding

The published structure places seventy per cent on a three-hour closed-book written examination. Continuous Assessment, Practical Work and Written Examination each require a pass mark across the full assessment scope.

Confirm the current pass rules on the course Moodle page. The examination has equal Engineering Geology and Rock Mechanics parts, so narrow strength in only descriptive geology or only calculations is risky. Practical work adds another demand: specimen identification, orientation measurements and laboratory tests require observation under time and equipment constraints.

Difficulty comes from choosing the right model before applying a familiar formula. A polished calculation of the wrong slope mechanism is still the wrong analysis.

How this guide is organised

The ten chapters follow a dependency chain. Minerals and rock origins establish material vocabulary. Structures, weathering and map construction establish geometry and variability.

Discontinuities connect geological description to potential block movement. Stress, strain and in-situ measurements establish the mechanical state. Laboratory tests and failure criteria establish resistance. The final chapter combines all of them in slopes, foundations, tunnels and other works.

Every chapter uses original worked examples and answered practice rather than reproducing University assessment questions.

Evidence and boundaries

Assessment weights, the pass condition and the examination format follow the published course introduction for this offering.

The official course information for this offering provides no past examination paper, sample final or published examination marking rubric, so none is implied. One field-trip report guideline identifies CIVL2106 in its header; its word limit, section list and deadline are excluded from this guide rather than silently assigned to CIVL2102. Confirm current operational details on the course Moodle page.

Worked example · free

Check a wet rock plane before recommending support

Q [10 marks]. AskSia-authored practice. A block weighing 120 kN rests on a plane dipping 30 degrees. The contact area is 5 square metres, cohesion is 6 kPa, friction angle is 26 degrees and uplift is 25 kN. Find the factor of safety and state the first design implication. The mark allocation used here is an AskSia revision aid, not a University assessment scheme.
The four silhouettes relate structure to movement: a single basal plane, an intersecting wedge, steep columns that rotate, or a curved path through broken materThe four silhouettes relate structure to movement: a single basal plane, an intersecting wedge, steep columns that rotate, or a curved path through broken material.Structure selects the possible slope mechanismplanewedgetopplingcircular
The four silhouettes relate structure to movement: a single basal plane, an intersecting wedge, steep columns that rotate, or a curved path through broken material.
  • 3Resolve weight into driving and normal components.
  • 4Use effective normal force in the resistance equation.
  • 3Interpret the result and name the mechanism changed by the first response.
Driving force is 120 sin30 degrees = 60.0 kN. Total normal force is 120 cos30 degrees = 103.9 kN, so effective normal force after uplift is 78.9 kN. Cohesion contributes 30.0 kN and friction contributes 78.9 tan26 degrees = 38.5 kN. Factor of safety is 68.5/60.0 = 1.14. Drainage is the first implication because the water term is directly reducing effective normal force; reinforcement may follow if the required reliability is still not met.
Sia tip — Keep water on the normal-force line. If it disappears from the calculation, the effective-stress check has been lost.
Glossary

Key terms

Cleavage
Repeated mineral breakage along planes of weaker bonding, used as a diagnostic property.
Unconformity
A surface representing missing geological time between older and younger materials.
Weathering Grade
A material description integrating mineral decomposition, preserved structure and strength.
Dip
The steepest downward angle on a plane, stated with its direction.
Persistence
The areal extent of a discontinuity, commonly estimated from observed trace length.
Principal Stress
A normal stress acting on a plane where shear stress is zero.
Young's Modulus
The selected slope of a stress-strain relation in an elastic range.
In-Situ Stress
The stress state existing in the ground before a new engineering disturbance.
UCS
Peak axial stress sustained by an unconfined cylindrical rock specimen.
Effective Stress
Stress carried by the solid skeleton after pore pressure is subtracted from total normal stress.
Friction Angle
The parameter controlling the normal-stress-dependent slope of a Mohr-Coulomb envelope.
Factor of Safety
The ratio of modelled resistance to modelled driving demand for a stated mechanism.
FAQ

CIVL2102 FAQ

How is the course assessed?

Continuous Assessment is worth ten per cent, Practical Work twenty per cent and the Written Examination seventy per cent. Each assessment type requires a pass mark across the full assessment scope. Continuous Assessment includes two assignments and a field-trip report. The compulsory site-visit rule gives zero for that part when required safety footwear is not worn and no makeup visit is arranged.

Confirm current pass rules and field-trip group allocation on the course Moodle page.

What is known about the final examination?

It is a three-hour sit-in closed-book examination. Half of the examination is Engineering Geology and half is Rock Mechanics. The official course information for this offering does not state question counts, question types, section rules or permitted aids beyond the closed-book statement, so confirm live instructions on Moodle.

Why are geological cross-sections important?

They force map locations, elevations, contact relationships and structural orientation into one consistent subsurface interpretation. A section is not an artistic sketch: every underground line should be constrained by a mapped crossing, dip, stratigraphic relation or clearly labelled assumption.

What does a stereonet establish?

A stereonet represents planes and lines so that joint sets, intersection lines and possible daylighting directions can be compared with an excavation face. It establishes kinematic possibility, not failure. Strength, persistence, filling and water still have to be evaluated.

Which rock tests should I be able to interpret?

The materials cover uniaxial compression, Brazilian tension and triaxial compression, alongside index tests. Know what each apparatus controls, what response is measured, which parameter is inferred and which failure observation would invalidate the calculation.

How does water change a failure calculation?

Pore pressure reduces effective normal stress and therefore reduces frictional resistance. In Mohr space, equal pore pressure shifts the effective-stress circle left without changing its radius. In a slope free body, uplift reduces the normal force available for friction.

Are past papers provided for this offering?

The official course information for this offering provides no past examination paper, practice final or published examination solution. The practice in this guide is independently authored to rehearse the published concepts and methods, and its study allocations are not University marking schemes.

What is the best revision sequence?

Move from observation to geometry, then mechanics and design. Secure minerals, rocks, weathering, maps and discontinuities first. Follow with stress, laboratory tests and failure criteria. Finish by integrating those ideas in slope, foundation and excavation cases.

Chapter questions

Questions students ask in each CIVL2102 chapter

Why is colour a weak identification property?
Many minerals share colours, while weathering, impurities and surface coatings can alter appearance. Colour is useful for selecting candidates, but hardness, cleavage, streak and habit supply more independent evidence. A confident answer normally combines at least two diagnostic properties. Chapter 01 · Minerals and Rock Identification
How does cooling rate affect igneous texture?
Slow cooling allows crystals more time to grow, producing coarser visible grains. Rapid cooling produces a finer texture. A porphyritic rock records a change in cooling history because large crystals formed before the finer groundmass. Chapter 02 · Rock Origins and Stratigraphic Order
Why can a fault affect rockhead?
Faulting can fracture rock and increase pathways for water, allowing deeper weathering and erosion than in adjacent intact material. The result may be an abrupt or elongated depression in competent rock rather than a smooth regional surface. Chapter 03 · Structures, Hong Kong Geology and Weathering
Why must the topographic profile come first?
Every geological crossing is placed on that profile. If a contour is misplaced, all later contacts inherit the error. Building the ground line first also exposes vertical exaggeration and makes the elevation of each projected feature explicit. Chapter 04 · Geological Maps and Cross-Sections
Why do spacing and persistence matter separately?
Spacing influences the typical block dimension, while persistence controls whether a potential release surface continues far enough to define a moving block. Close spacing with short traces can behave differently from wider spacing with one continuous surface. Chapter 05 · Discontinuities and Stereonet Reasoning
Why does stress change when the plane rotates?
The force state at the point is unchanged, but its decomposition into components normal and tangential to the chosen plane changes. Stress transformation expresses that geometry. Principal planes are the special orientations where the tangential component becomes zero. Chapter 06 · Stress, Strain and Elastic Response
Why is overburden not enough to define the stress state?
It supplies a useful vertical scale, but horizontal stresses depend on elastic response, tectonics, erosion and locked-in history. Direction and magnitude can therefore differ from a simple gravitational assumption, especially near major structures or excavations. Chapter 07 · In-Situ Stress and Measurement
Why is the observed failure mode important?
The equation assumes a particular stress field and break. End crushing in compression or local crushing in a Brazilian disc indicates another mechanism. Reporting the calculated number would then mislabel what the apparatus actually produced. Chapter 08 · Rock Testing and Strength Parameters
Why does water reduce shear resistance?
Pore pressure carries part of the total normal stress, leaving less effective compression across the potential failure plane. The frictional part of resistance therefore falls. The external load can remain unchanged while the effective state moves toward failure. Chapter 09 · Failure Criteria and Water Effects
How do I choose a rock-slope failure mode?
Use discontinuity and face geometry first. A single daylighting plane suggests plane sliding, two intersecting planes may form a wedge, steep columns may topple and heavily fractured material may behave through a circular mechanism. Then test resistance. Chapter 10 · Rock Slopes and Engineering Works
Study strategy

How to study for the exam

Build one compact ground model and reuse it. Start with a weathered granite cutting crossed by a fault and two joint sets. Describe the minerals and weathering grade, draw a map and cross-section, plot the discontinuities, choose a possible slope mechanism, assign an effective stress case, select laboratory parameters and compute a factor of safety. After each step, write the observation that would change your conclusion.

For numerical revision, keep a unit ledger beside every formula and read each result as a direction check. For descriptive revision, use paired contrasts: cleavage against fracture, strike against dip, intact rock against rock mass, index test against design test, total stress against effective stress. Alternate the two examination halves in the same session so that geological evidence repeatedly feeds mechanical reasoning.

Confirm live examination instructions and current deadlines on Moodle rather than inferring a question pattern from the guide.

A+Everything unlocked
Unlocks this Bible + all 52 of your subjects at The University of Hong Kong, plus 1,000+ more Bibles across the AskSia library.
Sia - your CIVL2102 tutor, unlimited, worked the way the exam marks it
The full 33-page Bible + practice bank with worked solutions
Chrome extension - sync your LMS so Sia knows your deadlines
Bilingual EN / Chinese on every Bible and every Sia answer
$0.99 Trial
30-day money-back · cancel in one tap · how it works