The University of Hong Kong · FACULTY OF ENGINEERING

CIVL2102 Chap.4 Geological Maps and Cross-Sections

- one subject, every graph, every model, every mark
6 Chapters2-page Bible
Our own words - no uploaded lecturer files
Updated for this semester
Chapter 4 of 10 · CIVL2102

Geological Maps and Cross-Sections

A section is constrained by the map

Cross-section construction begins with horizontal position and elevation. Mark the transect, record contour crossings, build the topographic profile and project geological contacts to their correct locations. Only then should surfaces be continued underground. Dip symbols, stratigraphic order and cross-cutting relationships constrain the continuation.

Unsupported detail makes a section look complete while reducing its reliability.

Contact traces reveal attitude

A horizontal contact follows a contour because its elevation is constant. A vertical contact cuts contours without topographic deflection on a simple map. Dipping contacts form patterns across valleys that depend on the relation between dip and topographic slope.

Instead of relying on one memorised V rule, compare elevations along the trace and determine the direction in which the plane descends.

Scale changes apparent geometry

Vertical exaggeration steepens apparent topography and changes the drawn dip if it is not corrected. State both scales and use equal scale where practical. Faults, intrusions and folds must preserve their mapped relationships.

A section should be auditable: every line should be linked to a crossing, orientation, order or labelled assumption.

In this chapter

What this chapter covers

  • 01

    Transect and contour crossings

  • 02

    Topographic profile construction

  • 03

    Projection of contacts

  • 04

    Horizontal, vertical and dipping traces

  • 05

    Faults, intrusions and folds

  • 06

    Vertical exaggeration and apparent dip

Worked example · free

Project a dipping contact

Q [8 marks]. A contact crosses the middle of a transect at elevation 110 metres and dips twenty degrees toward endpoint B. Explain the construction. The mark allocation used here is an AskSia revision aid, not a University assessment scheme.
The dashed projectors preserve the map positions of contact crossings, while the lower profile carries their elevations before the dipping surface is continued The dashed projectors preserve the map positions of contact crossings, while the lower profile carries their elevations before the dipping surface is continued underground.Project contacts from map to sectionABSection preserves horizontal position and topographic height
The dashed projectors preserve the map positions of contact crossings, while the lower profile carries their elevations before the dipping surface is continued underground.
  • 3Build and label the topographic profile.
  • 2Place the contact at its mapped crossing and height.
  • 3Continue it in the correct direction and scale.
Plot the ground profile from distance and elevation. Project the contact vertically from its map crossing to the profile at 110 metres. Continue the surface downward toward B at twenty degrees measured from horizontal if the scales are equal. Label units from the map. Do not add another contact or depth termination without evidence.
Sia tip — A plane dipping toward B must become lower toward B. Check that direction before refining the drawing.
Glossary

Key terms

Topographic Profile
A vertical section of ground elevation along a stated transect.
Contact
A mapped boundary between geological units.
Outcrop Trace
The line where a geological surface intersects the ground.
Vertical Exaggeration
A larger vertical than horizontal scale used in a section.
Apparent Dip
The dip seen in a section not aligned with the true dip direction.
Projection
Transfer of a mapped position or orientation into the section plane.
FAQ

Geological Maps and Cross-Sections FAQ

Why must the topographic profile come first?

Every geological crossing is placed on that profile. If a contour is misplaced, all later contacts inherit the error. Building the ground line first also exposes vertical exaggeration and makes the elevation of each projected feature explicit.

What does a contact following a contour imply?

It supports a horizontal attitude because the contact remains at constant elevation. The pattern does not reveal unit thickness or prove the surface stays horizontal beyond the mapped area, so those features require additional evidence.

How much detail should be drawn below ground?

Only enough to satisfy mapped crossings, orientations and geological relationships. Continue contacts consistently, preserve fault displacement and cross-cutting intrusions, but label uncertainty rather than inventing terminations or hidden units that the map cannot constrain.

How can I audit a completed section?

Tag each line as constrained by a contour, mapped contact, dip, unit order or explicit inference. Imagine looking down on the section and check whether it reproduces the map trace. A line with no tag, or one that returns the wrong surface pattern, needs correction or a clearly stated uncertainty.

Study strategy

Exam move

Practise the construction order on small maps. Cover the supplied section, mark the transect crossings, build topography and project contacts before comparing answers. Use a different colour for direct evidence and inferred continuation. On review, remove every underground line that cannot be linked to a map observation or stated assumption. Prepare a construction checklist and apply it without skipping steps.

Label the horizontal scale, plot contour crossings, join the topographic profile, place each geological crossing at the ground surface, and only then use orientation and unit order below ground. When vertical exaggeration is present, calculate its ratio before drawing an apparent dip.

Use short drills that isolate one difficulty: a horizontal contact following a contour, a vertical contact crossing relief, a dipping contact through a valley, a fault offset, or an intrusion cutting several units. After each drill, reverse the reasoning by asking what surface trace your completed section would produce. A mismatch reveals either a projection error or an inconsistent dip.

For folded sequences, write the unit order in the margin and preserve it through each limb. For faults, distinguish the mapped offset from an invented depth termination. Add uncertainty deliberately by giving one contact only two constrained points; draw the supported continuation as a hypothesis and name the observation needed to refine it.

Practise verbal explanations alongside sketches because a correct line without a reason is difficult to audit. Your explanation should identify the map crossing, elevation, direction of descent, and relationship to adjacent units. In timed work, reserve a final pass for labels, scale, and impossible intersections. The aim is not a visually elaborate section.

It is a section whose every line can be traced back to a mapped position, structural measurement, or stated assumption.

A+Everything unlocked
Unlocks this Bible + all 52 of your subjects at The University of Hong Kong, plus 1,000+ more Bibles across the AskSia library.
Sia - your CIVL2102 tutor, unlimited, worked the way the exam marks it
The full 2-page Bible + practice bank with worked solutions
Chrome extension - sync your LMS so Sia knows your deadlines
Bilingual EN / Chinese on every Bible and every Sia answer
$0.99 Trial
30-day money-back · cancel in one tap · how it works