The University of Hong Kong · FACULTY OF ELECTRICAL ENGINEERING

ELEC6103 Chap.7 Decibels, Link Budgets and Transmission Theory

- one subject, every graph, every model, every mark
7 Chapters5-page Bible
Our own words - no uploaded lecturer files
Updated for this semester
Chapter 7 of 11 · ELEC6103

Decibels, Link Budgets and Transmission Theory

What a link budget is for

A link budget forecasts whether a satellite link will work by tallying every gain and loss between the transmitting modem and the receiving one, one direction at a time. Users rely on it to set expectations, operators to price transponder capacity, and manufacturers to write equipment specifications.

The lecture describes it as part science and part art: the sums are mechanical, but choosing margins and assumptions takes judgement. A complete carrier budget joins an uplink calculation to a downlink calculation.

Why everything is in decibels

Transmitted and received powers in a satellite link differ by around twelve orders of magnitude, so the course expresses powers and gains logarithmically.

Because the logarithm of a product equals the sum of the logarithms, a chain of multiplications becomes a single column of additions and subtractions. Three units recur: dBW referenced to one watt, dBm referenced to one milliwatt, and dBi for antenna gain over an isotropic radiator.

A dBW and a dBm figure differ by 30, so convert first and keep the unit written on every row.

From flux density to the link equation

Power spread evenly over a sphere of radius R gives a flux density of Pt/4πR2; a directional antenna multiplies this by its gain, and that product of power and gain is called the EIRP. A receive aperture collects flux times its effective area.

Rewriting that area as a gain produces the link equation, whose denominator (4πR/λ)2 is the free-space path loss. In decibel form, received power is EIRP plus receive gain minus path loss minus atmospheric and antenna losses.

Path loss is spreading, not absorption

Free space absorbs nothing; the loss reflects energy thinning out over a growing sphere.

A handy version is Lp = 20 log d + 20 log f + 32.44, where d is in km and f in MHz, and each tenfold rise in frequency adds 20 dB. Over a 38,500 km geostationary path the tutorial gives 188.2 dB at 1.6 GHz rising to 213.7 dB at 30 GHz.

If dish areas stay fixed, though, the larger antenna gains at higher frequency cancel the extra loss.

A checklist for digital budgets

The revised Lecture 7 sets out eight steps: transmit power, transmit gain, space loss, other losses, noise temperature and receive gain, bit rate, comparison with the bit error requirement to find the margin, and adjustment if the margin is negative.

Tutorials work these rows by hand, and so should your revision.

In this chapter

What this chapter covers

  • 01

    Purpose, inputs and outputs of a satellite link budget

  • 02

    Decibel arithmetic and the dBW, dBm and dBi units

  • 03

    EIRP as the transmitter figure of merit

  • 04

    Flux density and received power from effective aperture

  • 05

    Free-space path loss and its frequency dependence

  • 06

    The received-power equation with atmospheric and antenna losses

  • 07

    The eight-step procedure for a digital link budget

Worked example · free

Received power for a Ku band downlink

Q [8 marks]. AskSia-authored practice. A satellite amplifier delivers 50 W to a 34 dB transmit antenna through a 1 dB feed loss. The earth station is 37,800 km away and receives at 12 GHz with a 40 dB dish. Allow 0.5 dB of atmospheric loss. Find the EIRP, the free-space path loss and the received power in dBW and in watts. The marks shown are an AskSia study allocation, not the University's marking scheme.
A link budget is a running total in decibels.A link budget is a running total in decibels. Each bar adds a gain in green or subtracts a loss in red, so 60 W at 4 GHz ends 40,000 km away at minus 114.1 dBW, about four picowatts.0 dBWPr −114.1EIRP 53.6path −196Gr +29.3Pt 17.8
A link budget is a running total in decibels. Each bar adds a gain in green or subtracts a loss in red, so 60 W at 4 GHz ends 40,000 km away at minus 114.1 dBW, about four picowatts.
  • 2Convert 50 W to dBW and form the EIRP after the feed loss.
  • 2Find the wavelength at 12 GHz and the path loss 20 log(4 pi R / wavelength).
  • 2Write Pr = EIRP + Gr - Lp - La and sum the column.
  • 2Convert the result from dBW back to watts.
Transmit power is 10 log 50 = 17.0 dBW, so EIRP = 17.0 - 1 + 34 = 50.0 dBW. At 12 GHz the wavelength is 0.3 / 12 = 0.025 m, and Lp = 20 log(4 pi x 3.78 x 107 / 0.025) = 205.6 dB; the practical form agrees, 32.44 + 81.58 + 91.55 = 205.6 dB. The received power is Pr = 50.0 + 40 - 205.6 - 0.5 = -116.1 dBW. As a linear power this is 10(-11.61) = 2.5 x 10-12 W, roughly two and a half picowatts, which is why the noise accompanying the carrier, not the carrier alone, decides whether such a link closes.
Sia tip — Write every row with its sign and unit before adding; a stray dBm value or a loss added instead of subtracted is the commonest way to lose the whole budget.
Glossary

Key terms

Link Budget
A tabulated account, in decibels, of every gain and loss along one direction of a satellite link, used to predict received power, carrier quality and margin.
Decibel
Ten times the base-ten logarithm of a power ratio; the course uses it so that multiplying gains and losses becomes simple addition and subtraction.
dBW
Power expressed in decibels relative to one watt, the usual unit for transmit powers and for received powers in the course's budgets; it is 30 less than the dBm figure.
dBi
Antenna gain in decibels relative to an isotropic radiator, so an antenna that radiates equally in every direction has a gain of 0 dBi.
EIRP
Effective isotropic radiated power: transmit power multiplied by transmit antenna gain, the figure of merit for a transmitter, quoted over a coverage area and best compared at a stated bandwidth.
Free-Space Path Loss
The term 20 log(4 pi R / wavelength) in the link equation, representing geometric spreading of energy over distance rather than any absorption in the medium.
Link Margin
The amount by which the delivered performance exceeds what the target bit error rate requires; a negative value tells the designer which parameters must be changed.
FAQ

Decibels, Link Budgets and Transmission Theory FAQ

Why does path loss rise with frequency if free space absorbs nothing?

The loss term is written relative to an isotropic receiver whose capture area shrinks as wavelength gets shorter, so the formula grows by 20 dB for each tenfold increase in frequency. It describes spreading, not absorption. When the receive dish keeps the same physical area, its gain rises by exactly the same amount, and the delivered power stays unchanged; only the bookkeeping moves between rows.

What goes into the received-power equation besides path loss?

Start with EIRP, add the receive antenna gain, then subtract every loss as a positive number: atmospheric attenuation, losses at the transmit and receive antennas, and extra terms for mispointing or rain where needed. Anything the designer cannot predict sits in a system margin. Each item matches a piece of hardware or a propagation effect along the chain from modulator to demodulator.

Why do operators care whether an EIRP figure states its bandwidth?

The same transmitter power spread across a wider bandwidth puts less power into any given slice of spectrum, so two EIRP values describe comparable performance only when they refer to equal bandwidths. EIRP also varies across a coverage footprint, being highest at beam centre. Without both details a quoted number cannot be used fairly in a budget or a commercial comparison.

Study strategy

Exam move

Memorise the decibel table first: plus 10 dB is ten times, plus 3 dB is roughly double, 0 dBi is isotropic, and a 30 dB gap separates dBW from dBm. Then rebuild the lecture's 60 W, 4 GHz picowatt example as a column of signed rows until you can reach minus 114.1 dBW without notes.

Practise path loss twice for each problem, once from 20 log(4 pi R over wavelength) and once from 32.44 plus 20 log f plus 20 log d, and treat agreement as your check. Use the 20 dB per decade rule to move a loss between bands. Close by reciting the eight-step digital budget procedure in order.

Working through Decibels, Link Budgets and Transmission Theory in ELEC6103? Sia is AskSia’s AI Electrical Engineering tutor — ask any ELEC6103 Decibels, Link Budgets and Transmission Theory question and get a clear, step-by-step explanation grounded in how ELEC6103 is taught and assessed. Read this chapter free, then take your hardest questions to Sia.

A+Everything unlocked
Unlocks this Bible + all 52 of your subjects at The University of Hong Kong, plus 1,000+ more Bibles across the AskSia library.
Sia - your ELEC6103 tutor, unlimited, worked the way the exam marks it
The full 5-page Bible + practice bank with worked solutions
Chrome extension - sync your LMS so Sia knows your deadlines
Bilingual EN / Chinese on every Bible and every Sia answer
$0.99 Trial
30-day money-back · cancel in one tap · how it works