The University of Hong Kong · FACULTY OF PHYSICS

PHYS2261 Chap.4 Heat, Work and the First Law

- one subject, every graph, every model, every mark
6 Chapters4-page Bible
Our own words - no uploaded lecturer files
Updated for this semester
Chapter 4 of 10 · PHYS2261

Heat, Work and the First Law

State change against transfer route

Internal energy depends only on equilibrium endpoints, while heat and work describe energy crossing the boundary during a process. The lecture convention writes ΔU=Q+W, with heat into the system and work done on the system positive.

A p-V path therefore determines work even when its endpoints and internal-energy change match another path.

Special processes

Adiabatic removes heat transfer; cyclic removes the net change of state functions. Neither condition makes every other term vanish.

In this chapter

What this chapter covers

  • 01

    Internal energy

  • 02

    Heat and work

  • 03

    First-law convention

  • 04

    Boundary work

  • 05

    Adiabatic processes

  • 06

    Cyclic processes

Worked example · free

Balance heat and expansion work

Q [6 marks]. The marks here divide a revision solution and do not reproduce an official university marking scheme. A gas absorbs 600 J and does 240 J of work on its surroundings. Find ΔU.
The shaded area depends on the path.The shaded area depends on the path. Two routes between the same volumes can transfer different work even though their internal-energy change is identical.Boundary work follows the process patharea = ∫p dVvolumepressure12
The shaded area depends on the path. Two routes between the same volumes can transfer different work even though their internal-energy change is identical.
  • 2Assign the heat sign.
  • 2Translate work by the gas into work on the gas.
  • 2Apply the first law and interpret the result.
Q=+600 J and W=-240 J, so ΔU=+360 J.
Sia tip — Describe who does the work before attaching a sign.
Glossary

Key terms

Internal Energy
A state function representing microscopic energy stored by a system.
Adiabatic Process
A process with no heat transfer across the system boundary.
Boundary Work
Energy transfer associated with displacement of a system boundary against pressure.
Cyclic Process
A process returning the system to its starting thermodynamic state.
FAQ

Heat, Work and the First Law FAQ

Why are heat and work not state functions?

Their amounts depend on the route between the same equilibrium endpoints. Different paths can divide the same internal-energy change into different heat and work transfers, so neither can be assigned as a property stored at one state.

What sign convention is used here?

Heat entering the system is positive and work done on the system is positive, giving ΔU=Q+W. Work done by an expanding gas is negative W. State the convention before any substitution.

Does an adiabatic process keep temperature constant?

No. Adiabatic only sets Q to zero. Compression can increase internal energy and temperature through positive work on the gas, while expansion can lower them through work delivered by the gas.

What is a reliable workflow for first-law process problems?

Define the system boundary and write the sign convention in words: heat into the system is positive and work done on it is positive. Translate the prompt into a verbal ledger before substituting numbers. Expansion work delivered by the gas is negative under this convention, while compression work applied by the surroundings is positive.

Decide whether kinetic or gravitational energy changes matter before reducing the balance to internal energy. Apply special labels carefully: adiabatic removes heat, constant volume removes boundary p dV work, and a cycle removes the net change of state functions, but none of those statements automatically removes every other term. On a p-V diagram, use direction as well as area to determine the work sign.

Calculate the endpoint internal-energy change from the material model and obtain the remaining transfer from conservation. Finish by checking energy units, physical direction and magnitude. For composite systems, write the outer balance first so internal transfers cancel when subsystem equations are added.

Study strategy

Exam move

For every process, write a verbal ledger before the equation: heat enters or leaves, and the system does work or has work done on it. Sketch the p-V path, shade the work area, and check cyclic or adiabatic limits separately. Finish by explaining the sign of ΔU in physical words. Build fluency by solving the same endpoint change along different routes. Draw two p-V paths connecting common states and compare their areas.

State that internal-energy change is shared while heat and work differ, then use the first law to calculate the compensating transfer. Repeat with the direction reversed so the signs are not learned from one picture. Before any numerical substitution, write the convention in a margin: heat into the system is positive and work on the system is positive. Translate every sentence in the prompt into that language.

Expansion work delivered by the gas becomes negative W; compression work applied to the gas becomes positive W. Add a verbal conservation check after the equation, describing how much energy entered, left and remained stored. Practise special processes in separate columns. For adiabatic change set Q to zero but retain work.

For constant volume remove boundary p dV work but do not assume all work modes vanish without justification. For a cycle set the net state-function change to zero and use the diagram direction to find the sign of net work. For constant pressure recognise why enthalpy becomes convenient when only p-V work occurs.

Rework one polytropic path and test whether its general work expression approaches the correct isothermal or adiabatic limit. Include macroscopic kinetic and gravitational energy in one control problem, then explain why they may be neglected in the piston problems. This prevents every energy change from being called internal by habit.

Keep process notation distinct from state notation so no endpoint value is assigned to heat or work. End each solution with three audits: the units must be energy, the sign must match the physical direction, and the magnitude must be possible given the transfers.

If an expanding gas with no other input appears to retain more energy than the heat it absorbed, stop and locate the reversed sign rather than carrying it into temperature calculations.

Working through Heat, Work and the First Law in PHYS2261? Sia is AskSia’s AI Physics tutor — ask any PHYS2261 Heat, Work and the First Law question and get a clear, step-by-step explanation grounded in how PHYS2261 is taught and assessed. Read this chapter free, then take your hardest questions to Sia.

A+Everything unlocked
Unlocks this Bible + all 52 of your subjects at The University of Hong Kong, plus 1,000+ more Bibles across the AskSia library.
Sia - your PHYS2261 tutor, unlimited, worked the way the exam marks it
The full 4-page Bible + practice bank with worked solutions
Chrome extension - sync your LMS so Sia knows your deadlines
Bilingual EN / Chinese on every Bible and every Sia answer
$0.99 Trial
30-day money-back · cancel in one tap · how it works