The University of Hong Kong · FACULTY OF PHYSICS

PHYS2261 Chap.3 Ideal and Real Gases

- one subject, every graph, every model, every mark
6 Chapters4-page Bible
Our own words - no uploaded lecturer files
Updated for this semester
Chapter 3 of 10 · PHYS2261

Ideal and Real Gases

Model before equation

The ideal-gas law is a dilute limit that neglects molecular size and intermolecular forces. Real-gas equations add corrections whose signs have physical meaning: attraction can lower wall pressure, while excluded volume can raise collision frequency.

Kinetic theory then connects the pressure-volume product to random molecular motion and mean kinetic energy.

Applications

Barometric variation, buoyancy and adiabatic compression all begin with a mechanical or energetic balance and use the equation of state only to close the unknowns.

In this chapter

What this chapter covers

  • 01

    Ideal-gas equation

  • 02

    Virial expansion

  • 03

    Van der Waals model

  • 04

    Kinetic assumptions

  • 05

    Pressure from momentum

  • 06

    Barometric equation

Worked example · free

Diagnose a real-gas deviation

Q [7 marks]. Marks used for this model exercise are editorial guidance, not a university assessment scheme. An ideal estimate gives 100 kPa while a measurement at the same state gives 96 kPa. Interpret the sign.
Real and ideal isotherms converge as volume grows.Real and ideal isotherms converge as volume grows. The curves separate at higher density because finite molecular size and interactions cease to be negligible.Same temperature, different equations of stateideal p=nRT/Vreal-gas correctionvolume Vpressure p
Real and ideal isotherms converge as volume grows. The curves separate at higher density because finite molecular size and interactions cease to be negligible.
  • 2Calculate or identify the ideal reference.
  • 2Compare the measured direction.
  • 3Link the sign to an interaction without overclaiming.
The lower measured pressure is consistent with attractive interactions reducing momentum transfer to the wall, but one point cannot determine a unique real-gas equation.
Sia tip — Interpret the sign before selecting a correction model.
Glossary

Key terms

Equation of State
A relation among coordinates that restricts possible equilibrium states.
Ideal Gas
A dilute model with negligible molecular volume and intermolecular forces.
Virial Expansion
A density expansion that expresses systematic real-gas corrections.
Excluded Volume
The volume unavailable to molecular centres because particles have finite size.
FAQ

Ideal and Real Gases FAQ

When is the ideal-gas law a reasonable approximation?

It is most reliable at low density and modest pressure, where molecules are far apart compared with their size and interactions make small corrections. The approximation should be justified from the regime rather than assumed from the word gas.

Why can attraction lower gas pressure?

An attractive interaction pulls a molecule back toward the gas as it approaches the wall, reducing the momentum delivered to that wall compared with an ideal particle at the same temperature and density.

How is the barometric equation constructed?

Balance the pressure force across a thin horizontal air slab against its weight, then use the ideal-gas law to replace density with pressure and temperature. The resulting differential equation predicts decreasing pressure with altitude.

How should I justify and test a gas model from data?

State the temperature, pressure, density range and uncertainty before choosing an equation of state. Use the ideal law as a dilute reference, calculate its prediction and compare the fractional deviation with measurement uncertainty. Interpret the sign before fitting: attraction can reduce wall pressure, while excluded volume can raise it by reducing the space available to molecular centres.

Several effects may compete, so one data point cannot identify a unique real-gas equation. Repeat measurements across density and check whether the trend is systematic. Every proposed correction should have consistent units and should become negligible as density approaches zero, allowing recovery of pV=nRT.

Connect the result to kinetic assumptions by asking which neglected molecular feature could change momentum transfer or internal energy. For atmospheric applications, keep hydrostatic balance separate from the temperature model and equation of state. Report the conclusion as a justified regime of validity, not as proof that one equation is universally true.

Study strategy

Exam move

Compare the ideal, virial and van der Waals forms in one table with their assumptions, correction directions and limiting behaviour. Work one proportionality problem without numbers, one barometric derivation and one real-gas sign diagnosis. Always test whether the correction disappears in the dilute limit. Start with the ideal-gas equation as a relation among equilibrium coordinates, not as a universal law.

For each practice state, estimate whether the density and pressure make the dilute approximation plausible. Then list the two principal real-gas mechanisms separately: attraction can reduce wall pressure, while finite size reduces available volume and can increase collision frequency. Draw qualitative isotherms showing their deviation and convergence at large volume.

Recreate the kinetic-theory pressure argument in words before writing symbols. Follow one molecule to the wall, identify its momentum change, count the molecules reaching the wall per unit time, and use isotropy to connect one velocity component to the total mean squared speed. Record which assumptions are used at each step so you can see how a real gas departs from the model.

Next, solve a scaling question at fixed temperature and amount without inserting numbers. State the inverse pressure-volume relation and test the limiting direction. For the barometric equation, keep the mechanical and thermodynamic parts separate: balance a thin slab first, then replace density with the equation of state, then integrate under the stated temperature model.

Repeat the outline for a varying-temperature atmosphere and note which extra relation is required. Include one buoyancy problem and check whether the computed hot-air density moves in the direction needed for lift. When data differ from an ideal prediction, compare the deviation with the measurement uncertainty before assigning a molecular cause. A single point may show a direction without selecting a unique model.

End with approximation boundaries. Verify that every correction vanishes or becomes negligible in the dilute limit, and check that pressures, volumes and temperatures remain positive in the stated regime. Keep units explicit, especially when converting litres, atmospheres or molar quantities.

The revision target is model judgement: you should be able to say why an equation applies, what physical effect a correction represents, and which observation would reveal that the approximation has failed.

Working through Ideal and Real Gases in PHYS2261? Sia is AskSia’s AI Physics tutor — ask any PHYS2261 Ideal and Real Gases question and get a clear, step-by-step explanation grounded in how PHYS2261 is taught and assessed. Read this chapter free, then take your hardest questions to Sia.

A+Everything unlocked
Unlocks this Bible + all 52 of your subjects at The University of Hong Kong, plus 1,000+ more Bibles across the AskSia library.
Sia - your PHYS2261 tutor, unlimited, worked the way the exam marks it
The full 4-page Bible + practice bank with worked solutions
Chrome extension - sync your LMS so Sia knows your deadlines
Bilingual EN / Chinese on every Bible and every Sia answer
$0.99 Trial
30-day money-back · cancel in one tap · how it works