MCEE6000D Chap.5 Crystal Structure, Ceramics and Polymers
Crystal Structure, Ceramics and Polymers
Order, defects and strength
Most metals are crystalline and polycrystalline, built of grains that nucleated at different places. Point defects include vacancies and self-interstitials; alloys can be solid solutions with substitutional or interstitial solute atoms, as copper and nickel are in all proportions.
Plastic deformation is dislocation movement, so metals are strengthened by impeding dislocations: finer grains, described by the Hall-Petch equation and produced by fast cooling, solid solution strain, and strain hardening.
Glass, ceramics and polymers
Shape memory alloys deform by twinning in the martensite phase and recover their shape when heated into austenite.
Silica is crystalline as quartz and amorphous as glass because molten silica is too viscous to reorganise; glass-ceramics such as CorningWare are made from glass by heat treatment, and clay products are plastic when wet and hard after firing.
A plot of specific volume against temperature separates a crystal, with a step at its melting point, from a glass, with only a change of slope at its glass transition, and places semicrystalline polymers between them. The chapter ends with gas diffusion through polymer films.
What this chapter covers
- 01
Crystals, polymorphism and grains
- 02
Vacancies, interstitials and solid solutions
- 03
Dislocations and three strengthening routes
- 04
The Hall-Petch relation
- 05
Shape memory in nitinol
- 06
Glass, glass-ceramics and clay products
- 07
Specific volume and the glass transition
- 08
Gas diffusion through polymer films
Worked example · free
Tell a crystal from a glass by its cooling curve
- +1A step change in specific volume marks solidification at the melting temperature, so X is crystalline with a melting temperature of 1,100 degrees C.
- +1A continuous decrease with only a change in slope marks a glass transition, so Y is a glass with a glass transition temperature near 560 degrees C.
- +1State what each is above its feature: X is liquid above 1,100 degrees C; Y is a supercooled liquid above 560 degrees C and a liquid at higher temperature.
Key terms
- Polycrystalline
- Made of many small crystals or grains, because nuclei form at different sites during crystallisation.
- Vacancy
- A point defect in which an atom is missing from a site it would normally occupy.
- Dislocation
- A linear defect around which atoms are misaligned; its movement is plastic deformation.
- Strain Hardening
- Strengthening a metal by plastic deformation, which creates new entangled dislocations that resist further motion.
- Glass Transition Temperature
- The temperature at which a cooling glassy material's specific volume curve slightly decreases in slope.
- Glass-ceramic
- A fine-grained polycrystalline material made from glass by heat treatment, with high strength and low thermal expansion.
- Solid Solution
- An alloy in which solute atoms join the host lattice without forming a new crystal structure.
Crystal Structure, Ceramics and Polymers FAQ
Why does a smaller grain size make a metal stronger?
Grain boundaries impede dislocation motion, and a fine-grained metal has more total boundary area than a coarse-grained one. Since plastic deformation is the movement of dislocations, blocking them raises yield strength. The Hall-Petch equation expresses the effect through the inverse square root of grain diameter, and fast cooling of molten metal is one way to get fine grains.
How does a shape memory alloy return to its shape?
The product is formed in the austenite phase above the finish temperature, cooled into martensite, and then deformed by twinning without dislocation movement. Heating back above the austenite finish temperature restores the original shape. Nitinol, nickel and titanium in roughly equal atomic proportions, is the course's example.
What controls gas flux through a polymer film?
The flux equals the permeability coefficient times the pressure difference across the film, divided by its thickness. So a thinner film or a larger pressure difference raises the flux, and choosing a polymer with a lower permeability coefficient lowers it, which is the basis for using polymers as membranes and packaging.
What is the difference between glass and a glass-ceramic?
Glass is a noncrystalline silicate made from ingredients such as silica, soda ash and limestone. A glass-ceramic starts as glass but is heat treated until it becomes a fine-grained polycrystalline solid, which gives it high strength, low thermal expansion, good high-temperature capability and biological compatibility. CorningWare is the course's product example.
Exam move
Draw the three cooling curves from memory and label every feature, then list the three strengthening routes with the mechanism for each. Close by reciting the four steps of the shape memory sequence in order. Finish with the polymer film flux calculation using numbers of your own.
Working through Crystal Structure, Ceramics and Polymers in MCEE6000D? Sia is AskSia’s AI Engineering tutor — ask any MCEE6000D Crystal Structure, Ceramics and Polymers question and get a clear, step-by-step explanation grounded in how MCEE6000D is taught and assessed. Read this chapter free, then take your hardest questions to Sia.