The Hong Kong Polytechnic University · FACULTY OF ELECTRICAL ENGINEERING

EE509 Chap.2 Insulation Families and Failure Modes

- one subject, every graph, every model, every mark
7 Chapters2-page Bible
Our own words - no uploaded lecturer files
Updated for this semester
Chapter 2 of 10 · EE509

Insulation Families and Failure Modes

One purpose, different failure physics

Gases, liquids and solids all prevent unwanted current, but a useful diagnosis separates their mechanisms. Gas failure grows from electron collisions and avalanches. Highly purified liquid can show related electronic growth, while commercial liquid is often controlled by bubbles, droplets or particles.

Solid trouble frequently develops at surfaces, voids and conductor interfaces rather than through perfect bulk material.

Recovery does not erase system damage

Many gaseous discharges recombine when stress is removed, and liquid flow can refill a puncture path. Discharge products may still settle on solid supports.

Flashover travels near a surface, tracking leaves a conducting path, treeing branches through a solid, and partial discharge progressively damages void walls. Controls must match the path: pressure or attachment for gas, purification for liquid, and surface or void management for solids.

In this chapter

What this chapter covers

  • 01

    Gaseous avalanche breakdown

  • 02

    Liquid self healing and contamination

  • 03

    Solid flashover and tracking

  • 04

    Treeing at internal imperfections

  • 05

    Partial discharge in voids

  • 06

    Interfaces as retained damage sites

  • 07

    Diagnostic protocol: locate the initiating path, identify the moving carrier or contaminant, decide whether the medium and neighbouring surfaces recover, select a control that interrupts the named mechanism, and state which inspection or measurement would support the explanation rather than merely listing properties of gas, liquid and solid insulation

Worked example · free

Locate retained damage in a mixed system

Q [6 marks]. A liquid-filled unit recovers electrically after a discharge but shows carbonised marks on a solid support. Diagnose the priority inspection. The weighting used here is for authored practice and is not the university assessment scheme.
Three insulation families share a purpose but not a failure path.Three insulation families share a purpose but not a failure path. The boxes compare the initiating mechanism and whether the damaged region can recover after stress is removed.GasLiquidSolidavalancheimpurity pathsurface or voidoften recoversself heals flowcumulative damagesame field, different failure physics
Three insulation families share a purpose but not a failure path. The boxes compare the initiating mechanism and whether the damaged region can recover after stress is removed.
  • 2Separate the recovering medium from the damaged part.
  • 2Name the surface failure evidence.
  • 2Propose the next inspection controls.
The recovered liquid is not the only concern. Carbonised marks indicate a retained surface path on the support, so inspect creepage distance, moisture, contamination and partial-discharge evidence. Replacing liquid alone would leave the damaged interface unaddressed.
Sia tip — Ask which component keeps the evidence after stress is removed.
Glossary

Key terms

Flashover
A discharge through gas along the surface of a solid insulator.
Tracking
Formation of a persistent conducting path over an insulating surface.
Treeing
Branching deterioration inside solid insulation or at a conductor interface.
Partial Discharge
A local discharge that bridges only part of an insulation system and can accumulate damage.
FAQ

Insulation Families and Failure Modes FAQ

Why is self healing not the same as harmless failure?

A gas can recombine and a liquid can refill a puncture while adjacent solids retain erosion, contamination or deposited products. Assess the whole insulation system and its interfaces, not only whether the main medium appears to recover.

How do flashover and treeing differ?

Flashover travels through gas close to a solid surface. Treeing develops as a branching failure within solid insulation or from an internal interface. The location determines whether creepage design or internal void control is the more relevant remedy.

Why are partial discharges important before full breakdown?

They dissipate energy in local voids, damage cavity walls and can generate more gas. Repetition makes the process cumulative, so partial-discharge activity can indicate ageing long before the complete insulation path fails.

Study strategy

Exam move

Make a three-column table for gas, liquid and solid insulation. For each, write the initiating mechanism, whether the medium can recover, what part keeps damage and which control acts on it. Practise classifying short failure descriptions before suggesting any remedy. A correct control without a correctly located mechanism is still an incomplete diagnosis.

Extend the table with four evidence columns: where the event begins, what moves through the insulation, whether damage remains, and what observation would discriminate the mechanism. For a gas, distinguish a transient ionized path from damage to adjacent solid surfaces. For a liquid, separate an electronic event in clean material from a bubble, droplet or particle route in commercial service.

For a solid, separate bulk puncture from a surface flashover and from slow thermal or chemical deterioration. This prevents the family name from becoming a substitute for analysis. Use timed classification drills. Read a two-sentence case and underline the location, time scale, recovery behaviour and environmental clue. State one leading mechanism and one plausible alternative. Only then choose a control.

Drying responds to moisture, filtration to particles, field grading to geometric concentration and cooling to thermal accumulation; none is a universal cure. If the proposed control does not interrupt a named causal step, revise the diagnosis. Practise writing recovery carefully. Gas or liquid may refill a discharge channel, but nearby surfaces can still be carbonized, contaminated or mechanically damaged.

A solid puncture is normally permanent because the material path itself has changed. Avoid absolute claims when the evidence describes only the immediate medium and not the whole insulation system. Add one interface to every equipment example. Ask how a gas-solid, liquid-solid or electrode-solid boundary changes local stress and collects contaminants.

Many practical failures occur there even though introductory tables list the media separately. Finish each comparison with a monitoring plan: identify a measurable sign such as partial-discharge pattern, temperature rise, moisture content or repeat breakdown location, and explain what result would support or weaken the proposed mechanism. That final prediction converts a descriptive comparison into an engineering diagnosis.

Working through Insulation Families and Failure Modes in EE509? Sia is AskSia’s AI Electrical Engineering tutor — ask any EE509 Insulation Families and Failure Modes question and get a clear, step-by-step explanation grounded in how EE509 is taught and assessed. Read this chapter free, then take your hardest questions to Sia.

A+Everything unlocked
Unlocks this Bible + all 24 of your subjects at The Hong Kong Polytechnic University, plus 1,000+ more Bibles across the AskSia library.
Sia - your EE509 tutor, unlimited, worked the way the exam marks it
The full 2-page Bible + practice bank with worked solutions
Chrome extension - sync your LMS so Sia knows your deadlines
Bilingual EN / Chinese on every Bible and every Sia answer
$0.99 Trial
30-day money-back · cancel in one tap · how it works