The University of Manchester · FACULTY OF ENGINEERING

CIVL13001 Chap.5 Shear Force and Bending Moment

- one subject, every graph, every model, every mark
7 Chapters4-page Bible
Our own words - no uploaded lecturer files
Updated for this semester
Chapter 5 of 8 · CIVL13001

Shear Force and Bending Moment

Shear Force and Bending Moment links loading to internal beam actions through aligned diagrams. Distributed load controls the slope of shear, while shear controls the slope of bending moment. Point loads create shear jumps and applied couples create moment jumps.

Boundary values and signed areas provide independent checks, and the moment extreme is found where shear changes sign or passes through zero.

Diagram construction starts with correct external reactions and a common horizontal coordinate. Positions where loading changes divide the beam into regions.

Inside each region, the load rule determines whether shear is constant, linear or curved; the shear rule then determines the moment shape. Left and right values are recorded separately at concentrated actions. Simple supports usually anchor zero moment, an unloaded free end anchors zero shear and moment, and a fixed support can sustain both.

Signed area beneath load changes shear, while signed area beneath shear changes moment. These relationships support reverse reading: a finished plot should reproduce the point forces, distributed actions, couples and boundary conditions shown on the original beam.

In this chapter

What this chapter covers

  • 01

    Beam cuts

  • 02

    Shear sign

  • 03

    Moment sign

  • 04

    Point-load jumps

  • 05

    Distributed-load slopes

  • 06

    Area relationships

  • 07

    Boundary closure

Worked example · free

Map a uniform load across a simple span

Q [6 marks]. A simply supported beam spans 8 m and carries 4 kN/m across the full span. Find reactions and maximum moment. The marks shown here are original study guidance and not an official University assessment scheme.
The eight metre beam carries four kilonewtons per metre, producing reactions of sixteen kilonewtons, zero shear at midspan and a thirty-two kilonewton metre momThe eight metre beam carries four kilonewtons per metre, producing reactions of sixteen kilonewtons, zero shear at midspan and a thirty-two kilonewton metre moment maximum.load wshear Vmoment M4 kN/m over 8 m+16 kN-16 kN32 kNmx = 4 m, V = 0
The eight metre beam carries four kilonewtons per metre, producing reactions of sixteen kilonewtons, zero shear at midspan and a thirty-two kilonewton metre moment maximum.
  • 2Replace the load by 32 kN at midspan for reactions; symmetry gives 16 kN at each support.
  • 2Write V(x) = 16 - 4x kN, which crosses zero at 4 m.
  • 2Write M(x) = 16x - 2x squared kNm, giving 32 kNm at midspan and zero at both supports.
Both reactions are 16 kN upward and the maximum bending moment is 32 kNm at midspan. The practice allocation is not official.
Sia tip — Use the signed area under shear to reproduce the moment change before accepting the diagram.
Glossary

Key terms

Shear diagram
A plot of internal shear force along a member coordinate.
Moment diagram
A plot of internal bending moment along a member coordinate.
Diagram jump
An instantaneous ordinate change caused by a concentrated force or couple in the related diagram.
FAQ

Shear Force and Bending Moment FAQ

Why do the diagrams share one horizontal scale?

Vertical alignment makes every load change, shear jump, shear zero and moment feature comparable at the same beam position. Misaligned sketches hide causal relationships and make segment lengths difficult to audit.

Where is bending moment largest?

In a smooth region, an extreme occurs where shear equals zero. A point-load jump can change shear sign without a finite zero interval, and the moment is then extreme at the load position.

How do areas check the result?

The signed area under distributed load gives the shear change, while signed area under shear gives the moment change. Known support or free-end values should close the cumulative totals.

Study strategy

Exam move

Always draw load, shear and moment on the same coordinate. Find reactions first and mark every position where the loading rule changes. Walk from left to right, applying point-force jumps and distributed-load slopes to shear. Then use shear sign and area to construct moment, preserving continuity except at an applied couple. Label left and right values around every jump.

Practise reverse reading as well: infer a point load from a shear jump, a uniform load from linear shear, and a couple from a moment jump without a shear change. Include simple supports, cantilevers and internal hinges so boundary values do not become one memorised rule. Close every problem with total force balance, end moments and signed-area checks.

Record errors under reaction, jump magnitude, slope, curve shape, support value and unit. A correct maximum ordinate on the wrong geometric shape is still an incorrect diagram, so explain why each segment is constant, linear or curved. Use a segment table before drawing: list the x-range, distributed load rule, shear slope, shear endpoint values, moment slope and expected moment shape.

This prevents a change point from disappearing between algebra and sketch. For point actions, write both left and right ordinates. For a distributed region, calculate the signed load area to move shear from one boundary to the other, then integrate shear area geometrically to move moment. Compare those areas with an explicit cut equation at one interior point.

Practise cases where shear crosses zero inside a region and cases where it changes sign through a point-load jump; both can locate a moment extreme but require different wording. Add one applied couple so moment discontinuity is distinguished from a sharp change in slope. Under time pressure, sketch qualitative shapes before computing precise values, then use the numbers to scale the already correct geometry.

Reverse-read a completed diagram the following day and reconstruct the load without seeing the question. If the reconstructed action differs, identify the first inconsistent jump or slope. This two-way practice develops more reliable diagram literacy than repeatedly tracing finished plots.

A+Everything unlocked
Unlocks this Bible + all 41 of your subjects at The University of Manchester, plus 1,000+ more Bibles across the AskSia library.
Sia - your CIVL13001 tutor, unlimited, worked the way the exam marks it
The full 4-page Bible + practice bank with worked solutions
Chrome extension - sync your LMS so Sia knows your deadlines
Bilingual EN / Chinese on every Bible and every Sia answer
$0.99 Trial
30-day money-back · cancel in one tap · how it works